what to do with it.
This forces us to scan targets sequentially, not in parallel.
The reason we might want to do this is that SPI negotiation
might not work right at the SIM level if we try to do it
in parallel. We *could* fix this for each SIM where this is
broken, but it's a lot harder to do that when we can simply
ask CAM to probe sequentially.
If PIM_SEQSCAN is not set (default), the original behaviour for
probing is unchanged.
LUN probing is still done in parallel for each target in either
case.
While we're at it, clean up some resource leakage for error
cases.
Reviewed by: ken, scott, scsi@
MFC after: 1 week
usage as of SPC2r20. Specifically, handle the BQueue
flag which will indicate that a device supports the
Basic Queueing model (no Head of Queue or Ordered tags).
When this flag is set, SID_CmdQueue is clear. This has
causes FreeBSD to assume that the device did not support
tagged operations.
MFC after: 1 month
operations before returning. Point the bus at a dummy cam_sim
structure so that any CCBs will complete immediately with a
CAM_DEV_NOT_THERE status, and ensure that any xpt_schedule() calls
on the bus's devices will immediately call the peripheral's
periph_start() routine. Also repeat the async messages because
devices that were part of the way through being probed may appear
after the original AC_LOST_DEVICE was sent, and would otherwise
never go away.
These changes make it possible to deregister a bus and free the SIM
at most stages during bus probing without the usual crashes in
camisr(). In particular, plugging in a umass device and then
unplugging it as soon as the first probe messages appeared would
almost always result in a crash. Now the device just goes away with
a few CAM errors and all references to the CAM bus, target and
device are dropped correctly.
tunable (until we get REPORT LUNS in place).
If we're probing luns, and each probe succeeds, we keep going past
lun 7 if we're a SCSI3 or better device (until we fail to probe).
If we're probing luns, and a probe fails, we only keep going if
we're quirked *for* it (CAM_QUIRK_HILUNS), and if we're not quirked
*against* it (CAM_QUIRK_NOHILUNS), or we're a SCSI3 or better device
and the tunable (kern.cam.cam_srch_hi) is set non-zero.
Reviewed by: nate@rootlabs.org, gibbs@scsiguy.com, ken@kdm.com, scottl@samsco.org
MFC after: 1 week
module-specific malloc types. These should help us to pinpoint the
possible memory leakage in the future.
- Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based
CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully
this would be helpful if someday we move the CCB allocator to use UMA
instead of malloc().
Encouraged by: jeffr, rwatson
Reviewed by: gibbs, scottl
Approved by: re (scottl)
(depends on how many memory you have) observed through "tar -tvf /dev/sa0."
Without this patch, RELENG_5 and HEAD panics with something like:
kmem_malloc(4096): kmem_map too small: 42258432 total allocated
RELENG_4 doesn't panic but spews following errors:
camq_init: - cannot malloc array!
Reviewed by: gibbs, scottl
Approved by: re (scottl)
MFC after: 3 days
disables tag queuing temporarily in order to allow controllers a window
to safely perform transfer negotiation with non-compliant devices. Before
this change, CAM would restore the queue depth to the controller specified
maximum or device quirk level rather than any depth determined by reactions
to QUEUE FULL/BUSY events or an explicit user setting.
During device probe, initialize the flags field for XPT_SCAN_BUS.
The uninitialized value often confused CAM into not bothering to
issue an AC_FOUND_DEVICE async event for new devices. The reason
this bug wasn't reported earlier is that CAM manually announces
devices after the initial system bus scans.
MFC: 3 days
Giant held. In camisr(), move the ccb_bioq elements to a temporary local list
and then process the elements off of that list. This enables the list to be
processed by only taking the ccb_bioq_lock once and only for a very short
time.
ccb_bioq_lock is a leaf mutex, so it's fine to call xpt_done() with other
locks held. This is just a very minor step in the work to lock CAM, but
it allows us to avoid some messy locking/unlock dances in certain drivers.
It reports itself as SCSI-3 but doesnt like getting probed on high luns
because it hangs hard after finding itself again on lun 32...
Suggested by: Kenneth Merry
its ability to automatically scan and attach luns for modern storage
which has luns in the 0..1000 range, not 0..7.
The correct thing would be to do REPORT LUNS for devices whose LUN0
version shows a version >= SCSI3, but lacking that we should be able
to search higher than LUN 7 if we're >= SCSI3 with no ill effects.
This change keeps all of the QUIRK_HILUNS quirks, obeys the QUIRK_NOLUNS,
and introduces a QUIRK_NOHILUNS which will keep searches above LUN 7
happening for devices that report >= SCSI3 compliance. I doubt the latter
will be needed, but you never know.
This allowed me to randomly scan and attach > 500 disks at a time in
a situation where quirking for QUIRK_HILUNS wasn't practical (the
vendor id and product id changes of the virtualization changes
constantly).
Reviewed by: ken@freebsd.org, scottl@freebsd.org, gibbs@freebsd.org
MFC after: 2 weeks
to request from devices during the "long inquiry" portion of our probe.
This same bug was fixed in the 4.x stream a few years ago, but the fix
was never propogated to -current.
This fix is slightly different than in -stable:
o Use offsetof() instead of a hard coded constant so as the make
the code more self-explainatory.
o Round odd long inquiry lengths up so as to avoid tickling ignore
wide residue bugs in broken parallel SCSI devices running with a
wide transfer negotiation.
MFC: 3 days
for unknown events.
A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
patterns. (These lines are correct the other two times they appear.)
Reported by: "Ted Unangst" <tedu@coverity.com>
Approved by: rwatson (mentor), ken (scsi)
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Free approx 86 major numbers with a mostly automatically generated patch.
A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
in geom_disk.c.
As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
branches:
Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.
This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.
Approved by: re(scottl)
