* Add baud rate and divisor programming code. See below for more
information.
* Flesh out ar933x_init() to disable interrupts and program the initial
console setup.
* Remove #if 0'ed code from ar933x_term().
* Explain what these functions do.
Now, the baud rate and divisor code comes from Linux, as a submission
to the OpenWRT project and Linux kernel from
Gabor Juhos <juhosg@openwrt.org>.
The original ticket for this code is https://dev.openwrt.org/ticket/12031 .
I've contacted Gabor and asked for his permission to also licence the patch
in question (which covers this code) to BSD lience and he's agreed.
Hence why I'm including it here in FreeBSD.
Tested:
* AP121 (AR9330)
* Default clock is 25MHz;
* Remove the UART register macro here - it's not needed as we don't need
to "adjust" the register offset / spacing at all;
* Remove unused fields in the softc.
Tested:
* AP121
includes support for the NIC and TOE features of the 40G, 10G, and
1G/100M cards based on the T5.
The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4)
has been updated instead of writing a brand new driver. T5 cards will
show up as cxl (short for cxlgb) ports attached to the t5nex bus driver.
Sponsored by: Chelsio
CAM. This can significantly improve performance particularly for SSDs
which don't suffer from seek latencies.
The sysctl / tunable kern.cam.sort_io_queues provides the systems default
setting where:-
0 = queued BIOs are NOT sorted
1 = queued BIOs are sorted (default)
Each device gets its own sysctl kern.cam.<type>.<id>.sort_io_queue
Valid values are:-
-1 = use system default (default)
0 = queued BIOs are NOT sorted
1 = queued BIOs are sorted
Note: Additional patch will look to add automatic use of none sorted queues
for none rotating media e.g. SSD's
Reviewed by: scottl
Approved by: pjd (mentor)
MFC after: 2 weeks
For TIMEWAIT handling tcp_input may have to jump back for an additional
pass through pcblookup. Prior to this change the fwd_tag had been
discarded after the first lookup, so a new connection attempt delivered
locally via 'ipfw fwd' would fail to find a match.
As of r248886 the tag will be detached and freed when passed to the
socket buffer.
NULL. This simplifies decisions around if/how requests are routed through
busdma. It also paves the way for supporting unmapped bios.
Sponsored by: Intel
add the ability for userland to be notified of changes on gpio pins via
a select(2)/read(2) interface.
Change the interrupt handler from filtered to threaded.
Because of the uiomove() calls in the new interface, change locking from
standard mutex to sx.
Add / restore the at91_gpio_high_z() function.
Reviewed by: imp (long ago)
of bits, not just a 0/1 indicating whether any of the masked bits are on.
This is compatible with the single in-tree caller of this function right now
(at91_vbus_poll() in dev/usb/controller/at91dci_atemelarm.c).
the older if_start/non-multiqueue interface from the stack. This
is not the default, but can be turned on in the Makefile now regardless
of the OS level to allow either testing or use of ALTQ.
MFC after: one week
Set promiscuous code was unconditionally turning off multicast when
turning off promiscuous mode, this should only be done when there are
less than MAX groups. Thanks to Mike Karels for this correction.
Second, the overtmp interrupt setup/detection was wrong, correcting it.
MFC after: one week
- Clear code that workarounded a bug in FreeBSD 3,
and even predated import of netgraph(4).
- Clear workaround for m_nextpkt pointing into
next record in buffer (fixed in r248884).
Assert that m_nextpkt is clear.
- Do not rely on SOCK_STREAM sockets containing
M_PKTHDR mbufs. Create a header ourselves and
attach chain to it. This is correct fix for
kern/154676.
PR: kern/154676
Sponsored by: Nginx, Inc
clear its pointer to next record, since next record
belongs to the buffer, and shouldn't be leaked.
The ng_ksocket(4) used to clear this pointer itself,
but the correct place is here.
Sponsored by: Nginx, Inc
but execute the commands in regular way. There is no any reason to cook CPU
while the system is still fully operational. After this change polling in
CAM is used only for kernel dumping.
driver's periphs, acquiring and releaseing periph references while doing it.
Use it to iterate over the lists of ada and da periphs when flushing caches
and putting devices to sleep on shutdown and suspend. Previous code could
panic in theory if some device disappear in the middle of the process.
decode. This is to accomodate hardware assist implementations that do not
provide the 'guest linear address' as part of nested page fault collateral.
Submitted by: Anish Gupta (akgupt3 at gmail dot com)
This implements the kernel glue needed (getc, putc, rxready).
This isn't a 16550 UART, even if the datasheet overview claims so.
The Linux ar933x support was used as a reference, however the uart code
is a reimplementation.
Attentive viewers will note that the uart code is based off of the ns8250
code and the UART bus code is a stubbed-out version of this. I'll be
replacing it with non-stubbed versions soon, making this a fully featured
driver.
Tested:
* AP121 reference board (AR933x), booting through the mountroot> prompt;
then doing some basic interactive tests in ddb.
0x3C: /* Per Intel document 325462-045US 01/2013. */
Add manpage to document all the goodness that is available in this
processor model.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris, sbruno
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
later found to not be usable because the controller doesn't support the
same number of queues.
This is not the normal case, but does occur with the Chatham prototype
board.
Sponsored by: Intel
1. If we wanted to send exactly as many bytes as the socket buffer is
sized for, the inner loop of kern_sendfile() would see that the
socket is full before seeing that it had no more bytes left to send.
This would cause it to return EAGAIN to the caller instead of
success. Fix by changing the order that these conditions are tested.
2. Simplify the calculation for the bytes to send in each iteration of
the inner loop of kern_sendfile()
3. Fix some calls with bogus arguments to sf_buf_ext(). These would
only trigger on mbuf allocation failure, but would be hilariously
bad if they did trigger.
Submitted by: gibbs(3), andre(2)
Reviewed by: emax, andre
Obtained from: Netflix
MFC after: 1 week
unmapped I/O. That one exception is access to INQUIRY VPD request result.
Those requests are never unmapped now, but to be safe add respective check
there and allow unmapped I/O for the SIM by setting PIM_UNMAPPED flag.
before the vnode is vput() in vm_mmap_vnode(). Error return means
that there is no use reference on the vnode from the vm object
reference, and failing to restore v_writecount breaks the invariant
that v_writecount is less or equal to the usecount.
The situation observed when nfs client returns ESTALE for
VOP_GETATTR() after the open.
In collaboration with: pho
MFC after: 1 week
This was ported from the AR724x code and I think that also doesn't
quite work. I'll investigate that soon.
With this in place the system reset path works, so 'reset' from kdb
actually resets the SoC.
Tested:
* AP121 test board
Before this change they were just leaked. Fortunately USB sticks now use
only one CCB, and so leak was only 2KB per detach, while other bigger SIMs
with much more allocated CCBs are rarely detached.
MFC after: 2 weeks
This basically restores the spirit of r203535, which was partially reverted
in r205557, while we still map fixed amount to work around transient issues
we experienced with r203535.
Prodded by: avg
Tested by: avg
MFC after: 1 week
