The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and
ifconfig.c only).
I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code
inside, as it never could have compiled - doh.)
Fixed nonblocking mode. It was per-device instead of per-file. This
also fixes clobbering of bd_rtout by overloading it to hold a wrong
version of the blocking flag. I hope nothing depends on the bugs.
Testing in if_ppp.c is good enough.
Added comments about bogus #includes and #defines.
Removed unused #includes.
Don't depend on gcc's misfeature of rewriting short args in old-style
function definitions to match wrong prototypes. I just changed the
function definition to match the prototype, since this is easy to
verify automatically (it causes no changes in the object code), but
it breaks K&R1 support and doesn't fix the pessimal type.
Use gettime() instead of microtime() to set if_lastchange for i/o's.
microtime() is probably too expensive. However, setting if_lastchange
for i/o's may be wrong.
volatile to use outside of splclock(). microtime() is probably too
expensive to use for every i/o. However, setting ifi_lastchange for
every i/o is just wrong according to the comment about ifi_lastchange
in <net/if.h>. It is set then for atm, fddi and the latest version
of ppp.)
Some of these changes are a bit rough and will become
more polished later. the changes to if_ethersubr should largely be moved
to within the appletalk code, but that will happen later.
A few of these were related to network-byteorder problems,
and more were related to loopback failures.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
Introduce the SIOC[SG]IFGENERIC hooks that can be used to pass an
arbritrary ioctl subcommand into an interface driver. Surprisingly
enough, there was no provision for this already present (except of the
option of abusing SIOC[SG]IFMEDIA for this).
The idea is that an interface driver can establish ioctl subcommands
of its own that can't be meaningfully interpreted by the upper layer
interface ioctl function. Something like this is required to
implement a clean solution of passing down things like CHAP secrets or
PPP options to the /sys/net/if_sppp* files. (Yes, my CHAP is now
finally working with it, but i gotta update my kernel to the new
callout interface before being able to commit _that_.)
Reviewed by: peter [long ago, actually]
by a protocol, to detirmine if an address matches the net this address
is part of. This is needed by protocols for which netmasks
"just don't work", for example appletalk.
Also add the code in appletalk to make use of this new feature.
Thsi fixes one of the longest standing bugs in appletalk.
The inability to talk to machines to which the path is via a router
which is on a different net, but the same netrange, as your interface.
Protocols that do not supply this function (e.g. IP) should not be affected.
2.3.0 -> 2.3.1 changes, but I seem to recall that there are certain
"issues" with 2.3.1 (I'm not sure if it's just pppd or the whole lot, I
am not quite that far). The present pppd seems to work with it just fine
for the time being.
Among the changes are that zlib (aka LZ77 aka deflate aka gzip) compression
is implemented as well as the original compress(1) LZW style.
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
returning ICMP_TIMXCEED)
use CISCO_UNICAST instead of CISCO_MULTICAST to send normal packets.
this is needed for packets to get processed by a cisco router,
but doesn't matter if a packet is just forwarded.
Reviewed by:itojun@itojun.org
than max_failures attempts, we are going to REJ it, to prevent endless
NAK loops.
(This is actually part of a larger local set of modifications i'm
running with, but the remainder (PAP & CHAP) ain't ready for prime-
time yet.)
1/ is compatible with the old route(1) in case needed.
2/ actually fixes the problem while vetting bad user input.
note: I have already fixed route(1) so the problem shouldn't occur.
if it does. use 0.0.0.0/0 instead of the word 'default' :)
We need to accept at least one sockaddr with zero length, in order
to be able to set the default route.
Suggested by: Phone conversation with Julian (sleep well!)
Route(1) has a bug that sends a bad message to the kernel. The kernel
trusts it and crashes. Add some sanity checks so that
we don't trust the user quite as much any more.
(also add a comment in if_ethersubr.c)
1: cvs and cvsup don't really support vendor branches other than 1.1.1.x,
this is on 1.1.2.x and causing problems in cvsup 'checkout mode', just the
same as cvs has problems interpreting dates. (cvs has "1.1.1" hard coded)
2: cvs 'rm'ing them takes them off the vendor branch and should hide the
above problems.
3: it's just clutter until the merge is done.
4: if the problem isn't sufficiently resolved by taking these off the
vendor branch, the files will have to be nuked and re-imported.
out to be a problem with VJ header compression.
davidg spotted this in usr.sbin/ppp/slcompress.c
a while ago, but I believe gave the wrong reasons -
it's too easy to reproduce ! The only scenario that
I've been able to reproduce the problem under is when
m_len is *exactly* 40 ! So go figure !
PR: 3749
Submitted elsewhere by: davidg
Obtained from: usr.sbin/ppp/slcompress.c
Remove previous hack in pppfcs().
This is still not the correct solution. We shouldn't
have any incorrect mbufs. This patch does however make
pppd/natd work (rather than jamming the interface).
so don't enforce the MTU as an MRU. Allow bidirectional ppp MTU
negotiation, by checking against a differnt figure for MRU.
Make it large enough for ATM frames at least.
Submitted by: archie@whistle.com (archie cobbs)
interrupt mask hackery wasn't happening when being modloaded via the
if_ppp lkm. It seems that the lkm system doesn't particularly like having
two sets of load/unload/etc routines. :-] This really should be fixed
by having a seperate if_ppp and ppp_tty lkm, but that requires that ppp_tty
is loaded after if_ppp, and needs to be able to link with symbols in
if_ppp. This gets messy, it is a better task for the in-kernel linker.
(if_ppp is generic, ppp_tty is a tty-specific bottom end for if_ppp, it's
not _too_ hard to have another "provider" (such as a hdlc sync card)
connected to if_ppp)
the man page or the source file. Fix this.
Minor problem: don't choke with ENETDOWN early. As long as our output
queue has space, put the IP packets there even if IPCP ain't up yet.
We will eventually be able delivering them once the PPP state machine
came up.
full implementation of the sate machine as described in RFC1661, and
provides support for plugging in various control protocols. I needed
this to provide PPP support for the BISDN project (right now).
Unfortunatley, while the existing API was almost up to the point, i
needed one minor API change in order to decouple the this-layer-
started and this-layer-finished actions from the respective Up and
Down events of the lower layer. This requires two additional lines in
the attach routines of all existing lower layer interface drivers that
are using syncPPP (shortcutting these actions and events). Apart from
this, i believe i didn't change the API of all this, so everything
should plug in without too many hassles. Please report if i broke
something in the existing drivers.
For a list of features (including new ones like dial-on-demand), and
things still to be done, please refer to the man page i'll commit asap.
Encouraged by: Serge Vakulenko <vak@cronyx.ru>
printf(9), so the log output doesn't clutter the console.
While i was at it, KNFified some function definitions. This file was
very inconsistent in this respect.
and not the MAC address of the first interface for every IPX address.
This is more inline with the way others like Novell do it.
Originally Submitted by: "Serge A. Babkin" <babkin@hq.icb.chel.su>
This commit includes the following changes:
1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility
glue for them is deleted, and the kernel will panic on boot if any are compiled
in.
2) Certain protocol entry points are modified to take a process structure,
so they they can easily tell whether or not it is possible to sleep, and
also to access credentials.
3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt()
call. Protocols should use the process pointer they are now passed.
4) The PF_LOCAL and PF_ROUTE families have been updated to use the new
style, as has the `raw' skeleton family.
5) PF_LOCAL sockets now obey the process's umask when creating a socket
in the filesystem.
As a result, LINT is now broken. I'm hoping that some enterprising hacker
with a bit more time will either make the broken bits work (should be
easy for netipx) or dike them out.
<sys/filio.h>, <sys/sockio.h> and <sys/ttycom.h> instead of
<sys/ioctl.h> in a couple of files. This is still only 1/3
as spammish as <sys/ioctl.h> - 5 or 6 old tty ioctl headers
aren't needed.
<sys/ttycom.h> and sometimes <sys/filio.h> instead of <sys/ioctl.h>
in miscellaneous files. Most of these files have nothing to do
with ttys but need to include <sys/ttycom.h> to get the definitions
of TIOC[SG]PGRP which are (ab)used to convert F[SG]ETOWN fcntls into
ioctls.
This is some of the worst code I've had to wade through in
ages and I don't want to have to start from scratch again next time.
(I have a 2.2 version of these comments, can I commit them?)
to -current.
Thanks goes to Ulrike Nitzsche <ulrike@ifw-dresden.de> for giving me
a chance to test this. Only the PCI driver is tested though.
One final patch will follow in a separate commit. This is so that
everything up to here can be dragged into 2.2, if we decide so.
Reviewed by: joerg
Submitted by: Matt Thomas <matt@3am-software.com>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
previous hackery involving struct in_ifaddr and arpcom. Get rid of the
abominable multi_kludge. Update all network interfaces to use the
new machanism. Distressingly few Ethernet drivers program the multicast
filter properly (assuming the hardware has one, which it usually does).
multicast group memberships. This is not actually operative
at the moment (a lot of other code still needs to be changed), but
this seemed like a useful reference point to check in so that
others (i.e. Bill Fenner) have fair warning of where we are going.
- C++ should be supported for application functions (use __BEGIN_DECLS,
etc.).
- prototypes should be sorted.
- comments on #endif's should spell identifiers the same as the code.
- comments on #endif's should have the same sense as the code (use `!'
to match ifndef, etc.).
> wollman 96/12/10 09:19:15
>
> Modified: lib/libc/net ether_addr.c ethers.3
> Log:
> Get struct ether_addr directly from <net/ethernet.h> rather than pulling
> in lots of unrelated junk from <net/if.h> and <net/if_ether.h>. These
> functions still aren't prototyped anywhere (but should be in
> <net/ethernet.h>---got that, Bill?).
(Note that this file has no copyright header; one should probably
be added.)
Use the interface MTU instead of the constant when deciding what
packets to accept.
Allow using the SIOCSIFMTU ioctl (e.g. "ifconfig tun0 mtu XXX") to
set the MTU.
to TAILQs. Fix places which referenced these for no good reason
that I can see (the references remain, but were fixed to compile
again; they are still questionable).
type to be int so that errors can be returned.
2) Use the new SIOCSIFMTU ether_ioctl support in the few drivers that are
using ether_ioctl().
3) In if_fxp.c: treat if_bpf as a token, not as a pointer. Don't bother
testing for FXP_NTXSEG being reached in fxp_start()...just check for
non-NULL 'm'. Change fxp_ioctl() to use ether_ioctl().
1/ increase the tun MTU from 1500 to 1600 to allow it to be used with
packets formatted according to RFC1490 and RFC1717
2/ allow the tsleep() when reading, to be interruptable by signals
so that one can now do:
od -xc </dev/tun0
to dump packets for debugging without getting hung.
Passed on by: Archie@whistle.com (archie Cobbs)
Nice but not neccessary in 2.2
<net/if_arp.h> and fixed the things that depended on it. The nested
include just allowed unportable programs to compile and made my
simple #include checking program report that networking code doesn't
need to include <sys/socket.h>.
Sorry if this makes it harder to merge in lite2 stuff but hey..
At least I can figure out what is going on whenever I end up going through those
files again..
do we have a policy regarding commenting existing code?
is non-null before trying to delete it in rt_setgate(), which then
allows removal of the special-case code from the RTM_ADD case.
This should fix the panics that joerg and Phil Karn have been seeing.
the end of that sstructure to make evolution easier.
Add definitions for the 802.3/Ethernet MIB. To implement this, simply
add a `struct ifmib_iso_8802_3' somewhere in your interface's softc,
point if_linkmib to it, set if_linkmiblen, and fill in the statistics
with appropriate values. (I didn't want to create Yet Another Ethernet-
related header file, otherwise this would have been separated out.)
like it does elsewhere. This is probably only happens when incorrect
args are given to route(8), or when running with non-IPv4 stacks but
incorrect args to the route command is no excuse for panicing!
Submitted by: Michael Clay <mclay@weareb.org>, PR#1532
allow a tunnel interface to be openned even if it has no remote address yet.
this may be needed if you have used
route add default -interface tun0
where the remote end might not even HAVE a number (e.g. netcom links)
This is a patch to sys/net/if.c. What it does is patch the algorithm
for finding an IP address on an interface which most closely matches
a given IP address. The problem with it is when no address matches,
and you have to just pick one at random. Then the code ends up picking
the last IP address in the list. This patch changes things so it
picks up the first address instead.
Usually the first address is more useful as the later ones are aliases.
interfaces. This creates two new tables in the net.link.generic branch
of the MIB; one contains (essentially) `ifdata' structures, and the other
contains a blob provided by the interface (and presumably used to
implement link-layer-specific MIB variables). A number of things
have been moved around in the `ifnet' and `ifdata' structures, so
NEW VERSIONS OF ifconfig(8) AND routed(8) ARE REQUIRED. (A simple
recompile is all that's necessary.)
I have a sample program which uses this interface for those interested
in making use of it.
when attepmting to add certain types of routes. This problem
only manifested itself in the presence of unconfigured point-to-point
interfaces.
Noticed by: Chuck Cranor <chuck@maria.wustl.edu>
The old system had the misfeature that the only policy it could implement
was tail-drop; the new IF_ENQ_DROP macro/function makes it possible
to implement more sophisticated queueing policies on a system-wide
basis. No code actually uses this yet (although on my machine
I have converted the ethernet and (polled) loopback to use it).
pr_usrreq mechanism which was poorly designed and error-prone. This
commit renames pr_usrreq to pr_ousrreq so that old code which depended on it
would break in an obvious manner. This commit also implements the new
interface for TCP, although the old function is left as an example
(#ifdef'ed out). This commit ALSO fixes a longstanding bug in the
TCP timer processing (introduced by davidg on 1995/04/12) which caused
timer processing on a TCB to always stop after a single timer had
expired (because it misinterpreted the return value from tcp_usrreq()
to indicate that the TCB had been deleted). Finally, some code
related to polling has been deleted from if.c because it is not
relevant t -current and doesn't look at all like my current code.
purpose, other than to get in the way of the ARP table and cause
"can't allocate llinfo" errors.
This change may cause gated or routed to start complaining when adding
such routes. If so, these programs will need to be fixed to not try
to add these routes.
Reviewed by: wollman
gary went a little overboard on commenting out unused variables.
Variables needed for ISO, LLC and NETATALK
were only enabled for ISO & LLC.. so NETATALK bombed.
All new code is "#ifdef PC98"ed so this should make no difference to
PC/AT (and its clones) users.
Ok'd by: core
Submitted by: FreeBSD(98) development team
gcc only inlines memcpy()'s whose count is constant and didn't inline
these. I want memcpy() in the kernel go away so that it's obvious that
it doesn't need to be optimized. Now it is only used for one struct
copy in si.c.
name string. This function should be rewritten to deal with more than
10 units of a given type.
Pointed out by: jmf@free-gate.com (Jean-Marc Frailong)
(I fixed it slightly differently)
Kernel Appletalk protocol support
both CAP and netatalk can make use of this..
still needs some owrk but it seemd the right tiime to commit it
so other can experiment.
the destination represents. For IP:
- Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local
(belongs to this host) and broadcast addresses, respectively.
- For all routes, RTF_MULTICAST is set if the destination is multicast.
The RTF_BROADCAST flag is used by ip_output() to eliminate a call to
in_broadcast() in a common case; this gives about 1% in our packet-generation
experiments. All three flags might be used (although they aren't now)
to determine whether a packet can be forwarded; a given host route can
represent a forwardable address if:
(rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST))
== RTF_HOST
Obviously, one still has to do all the work if a host route is not present,
but this code allows one to cache the results of such a lookup if rtalloc1()
is called without masking RTF_PRCLONING.
common labels for LINT. There are still some common declarations for the
!KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in
tcp_debug.h.
header for use in decompressing subsequant packets. If cslip gets garbage
(such as what happens when there is a port speed mismatch or modem line
noise), it will occasionally mistake the packet as a valid uncompressed
packet. When it tries to save off the header, it doesn't bother to check
for the validity of the header length and will happily clobber not only
the cslip data structure, but parts of other kernel memory that happens
to follow it...causing, ahem, undesired behavior.
when rt == rt->rt_gwroute . rt == rt->gwroute shouldn't happen
in the first place, but that's another problem.
(try "route add -host <hostonmynet> <hostonmynet>; ping <hostonmynet>;
route delete <hostonmynet>")
Story so fr:
1) PPP on-demand with static IP works.
2) PPP on-demand with dynamic IP says "Host is down" on any IP request
The problem is that tun driver check its READY state by *first* ifconfig address.
i.e.:
set ifaddr <addr> <addr2>
works (static IP) and
set ifaddr 0 <addr2>
not works (dynamic IP) because first address is equal 0.
Since tun is always POINTOPOINT interface, dst address is more meaningfull.
I change checking to second (dst) address in READY test.
PPP on-demand finally works.
- fill in and use ifp->if_softc
- use if_bpf rather than private cookie variables
- change bpf interface to take advantage of this
- call ether_ifattach() directly from Ethernet drivers
- delete kludge in if_attach() that did this indirectly
and rmx_recvpipe. This has no demonstrable effect on performance.
(ttcp reports about 44 Mbit/s for all the buffer sizes I tried between
16384 and 65536.)
of limited utility. In their place, add bunch of pointers
which will eventually be needed by the polled-interrupt scheme we're working
here. (It will probably be a while before the code is written and
committed here.) At the same time, a `void *if_softc' field
was added to the beginning of the structure to make certain driver
writers happier.
The practical upshot of all this is that you need to
recompile utilities such as netstat which manipulate struct ifnet.
others: start to populate the link-layer branch of the net mib, by
moving ARP to its proper place. (ARP is not a protocol family, it's an
interface layer between a medium-access layer and a protocol family.)
sysctl(8) needs to be taught about the structure of this branch, unless
Poul-Henning implements dynamic MIB exploration soon.
*' instead of caddr_t and it isn't optional (it never was). Most of the
netipx (and netns) pr_ctlinput functions abuse the second arg instead of
using the third arg but fixing this is beyond the scope of this round
of changes.
