allows the user to force the creation of a GPT even when there's a
MBR on the device. The MBR is simply wiped and any partitions
described by it are lost. Without the -f option one cannot create
a GPT when there's a MBR.
and 'mediasz' is in bytes. As it so happens, we define 'last' as the
sector number of the last sector on the medium which also is the size
of the PMBR partition. Therefore, use 'last' instead of 'mediasz'.
Submitted by: Dan Markarian <markarian at apple dot com>
to lo(4) interfaces to have an effect, and that this is not needed
when using IP fast forwarding.
Sponsored by: eXtensible Open Router Project <URL:http://www.xorp.org/>
MFC after: 3 weeks
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
implying that geom(8) is a RAID solution, but it can be used for that
purpose, and a pointer in that direction is better than nothing.
PR: 73088
Submitted by: Miguel Mendez <flynn@energyhq.es.eu.org>
the MBR after it is migrated to a GPT. While this was useful during
the early days when GPT support was under development, it's something
that users can use without knowing what they're getting themselves
into. The possible harm outweights the marginal usefulness it now has.
reversals+system lock ups if they are using ucred based rules
while running with debug.mpsafenet=1.
I am working on merging a shared locking mechanism into ipfw which
should take care of this problem, but it still requires a bit more
testing and review.
1) ginode() is passed a cylinder group number and inode number. The inode
number is relative to the cg. Use this relative number rather than the
absolute inode number when searching the cg inode bitmap to see if the inode
is allocated. Using the absolute number quickly runs the check off the end
of the array and causes invalid inodes to be referenced.
2) ginode() checks the absolute indoe number to make sure that it is greater
than ROOTINO. However, the caller loops through all of the possible inode
numbers and directly passes in values that are < ROOTINO. Instead of halting
the program with an error, just return NULL.
3) When allocating new cylinder groups, growfs was initializing all of the
inodes in the group regardless of this only being required for UFS1. Not
doing this for UFS2 provides a significant performance increase.
These fixes allow growing a filesystem beyond a trivial amount and have
been tested to grow an 8GB filesystem to 1.9TB. Much more testing would
be appreciated.
Obtained from: Sandvine, Inc.
count of zero and instead encode this information in the inode state.
Pass 4 performed a linear search of this list for each inode in
the file system, which performs poorly if the list is long.
Reviewed by: sam & keramida (an earlier version of the patch), mckusick
MFC after: 1 month
- Document better what the -C option means.
- The -c option is currently a no-op.
- The -D and -h options do not allow switching between
single/dual console modes and internal/video consoles.
(This used to be true for the old biosdisk boot code,
but now they just force the multiple consoles mode and
serial console, respectively.)
1M blocks and optionally write the read data to a file or disk.
If a read error happens, the 1M block gets put on the end of the worklist
and will be retried with 64k blocksize.
If a read error happens again, the 64k block gets put at the end of the
worklist and will be retried with single sector reads.
The program keeps trying until you stop it.
You can refresh a disk:
recoverdisk /dev/ad1 /dev/ad1
or salvage a floppy:
recoverdisk /dev/fd0 myfloppy.flp
standing ability to list a non-existant device in /etc/ttys to keep it
from dying. This is a documented feature of init(8):
The init utility can also be used to keep arbitrary daemons running,
automatically restarting them if they die. In this case, the first field
in the ttys(5) file must not reference the path to a configured device
node and will be passed to the daemon as the final argument on its com-
mand line. This is similar to the facility offered in the AT&T System V
UNIX /etc/inittab.
So rather than fix the man page to 'break' this feature, back out the change.
At the time this change was made, people felt that the spamage from
getty was annoying on headless consoles. Andrew Gallatin noted:
> Most of my machines are headless without video cards and use a serial
> console. With devfs this means that /dev/ttyv[1-N] do not exist and
> getty bitches like this:
>
> Sep 26 11:00:11 monet getty[543]: open /dev/ttyv1: No such file or directory
and we went off and applied this hack rather than fixing getty to
sleep forever when it gets an unknown device, as was Andrew's other
suggestion. Since it breaks things, I'm off to do that instead.
and disklabel.5. Refrencing bsdlabel.5 is somewhat bogus as it is not
connected to the build and is mostly unwritten at this point.
Reported by: Matthias Andree <matthias.andree at web.de>
PR: docs/72020
After this change it should be possible to use very big md(4) devices.
- Clean up and simplify the code a bit.
- Use humanize_number(3) to print size of md(4) devices.
- Add 't' suffix which stands for terabyte.
- Make '-S' to really work with all types of devices.
- Other minor changes.
and sent to the DIVERT socket while the original packet continues with the
next rule. Unlike a normally diverted packet no IP reassembly attemts are
made on tee'd packets and they are passed upwards totally unmodified.
Note: This will not be MFC'd to 4.x because of major infrastucture changes.
PR: kern/64240 (and many others collapsed into that one)
contain O_UID, O_GID and O_JAIL opcodes, the F_NOT or F_OR logical
operator bits get clobbered. Making it impossible to use the ``NOT'' or
``OR'' operators with uid, gid and jail based constraints.
The ipfw_insn instruction template contains a ``len'' element which
stores two pieces of information, the size of the instruction
(in 32-bit words) in the low 6 bits of "len" with the 2 remaining
bits to implement OR and NOT.
The current code clobbers the OR and NOT bits by initializing the
``len'' element to the size, rather than OR'ing the bits. This change
fixes this by changing the initialization of cmd->len to an OR operation
for the O_UID, O_GID and O_JAIL opcodes.
This may be a MFC candidate for RELENG_5.
Reviewed by: andre
Approved by: luigi
PR: kern/63961 (partially)
0xffffffff sectors. Document this limit and avoid installing bogus
labels on disks with more sectors.
Allowing the installation of labels addressing as much of the disk as
possiable may be a useful addition in some situations, but this was easy
to implement and should reduce confusion.
PR: bin/71408
increasing it. Add code to ifconfig to use this size to find the
sockaddr_dl after the struct if_data in the routing message. This
allows struct if_data to grow (up to 255 bytes) without breaking
ifconfig.
Submitted by: peter
keyword but without 'logamount' limit the amount of their log messages
by net.inet.ip.fw.verbose_limit sysctl value.
RELENG_5 candidate.
PR: kern/46080
Submitted by: Dan Pelleg
MFC after: 1 week
verification of regular data when device is in complete state.
On verification error, EIO error is returned for the bio and sysctl
kern.geom.raid3.stat.parity_mismatch is increased.
Suggested by: phk
as well, even if device is in complete state.
I observe 40% of speed-up with this option for random read operations,
but slowdown for sequential reads.
Basically, without this option reading from a RAID3 device built from 5
components (c0-c4) looks like this:
Request no. Used components
1 c0+c1+c2+c3
2 c0+c1+c2+c3
3 c0+c1+c2+c3
With the new feature:
Request no. Used components
1 c0+c1+c2+c3
2 (c1^c2^c3^c4)+c1+c2+c3
3 c0+(c0^c2^c3^c4)+c2+c3
4 c0+c1+(c0^c1^c3^c4)+c3
5 c0+c1+c2+(c0^c1^c2^c4)
6 c0+c1+c2+c3
[...]
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
Only the actual loopback address should be declared passive, other
addresses are very likely to be desirable to announce.
Check for IFF_LOOPBACK instead of IFF_PASSIVE to determine if we have
an unknown interface type.
Since the only thing truly unique about a prison is it's ID, I figured
this would be the most granular way of handling this.
This commit makes the following changes:
- Adds tokenizing and parsing for the ``jail'' command line option
to the ipfw(8) userspace utility.
- Append the ipfw opcode list with O_JAIL.
- While Iam here, add a comment informing others that if they
want to add additional opcodes, they should append them to the end
of the list to avoid ABI breakage.
- Add ``fw_prid'' to the ipfw ucred cache structure.
- When initializing ucred cache, if the process is jailed,
set fw_prid to the prison ID, otherwise set it to -1.
- Update man page to reflect these changes.
This change was a strong motivator behind the ucred caching
mechanism in ipfw.
A sample usage of this new functionality could be:
ipfw add count ip from any to any jail 2
It should be noted that because ucred based constraints
are only implemented for TCP and UDP packets, the same
applies for jail associations.
Conceptual head nod by: pjd
Reviewed by: rwatson
Approved by: bmilekic (mentor)
This is implemented through SNMP and requires the ilmi daemon to
run on the system. To prevent bloat in rescue the atmconfig for
rescue is compiled without this stuff.
For incoming packets, the packet's source address is checked if it
belongs to a directly connected network. If the network is directly
connected, then the interface the packet came on in is compared to
the interface the network is connected to. When incoming interface
and directly connected interface are not the same, the packet does
not match.
Usage example:
ipfw add deny ip from any to any not antispoof in
Manpage education by: ru
It allows to fix problems when last provider's sector is shared between few
providers.
- Bump version number for CONCAT and STRIPE and add code for backward
compatibility.
- Do not bump version number of MIRROR, as it wasn't officially introduced yet.
Even if someone started to play with it, there is no big deal, because
wrong MD5 sum of metadata will deny those providers.
- Update manual pages.
- Add version history to g_(stripe|concat).h files.
the bug exists in little-endian machine, it was not triggered due
to the difference of memory ordering between little/big endian
machines. Instead of relying on possibly modified value during
function invokcations, use saved copy of ifr.ifr_addr.sa_family.
Also add a comment at the top of ifconfig.c clarifying the issue
so the bug won't re-appear.
Approved by: jake
Reviewed by: yar
partitions and removes any that matches the pre-conditions. The
options are the same for the add command and are used to select
the partitions to remove.
Currently the remove command without any options deletes all GPT
partitions. This is rather harmful and will need anti-footshooting
measures.
starts at 1. No index is represented by 0.
o Change the show command to display the partition number at the expense
of the partition end columm. We already display the start and size.
o Enhance the add command to accept the -i option. The -i option allows
the user to specify which partition number the new partition should
get.
o Update the manpage accordingly.
While here:
o Make the UUIDs static to avoid runtime initialization,
o Rename ext to mslinux,
o Replace the use of memcmp() with uuid_equal(),
o Various style(9) improvements,
o Order the comparisons based on importance,
o Remove the word partition from all the descriptions,
o Other description improvements.
Includes patch from: T. Muthu Mohan < Muthu_T at dell dot com >
