and KASSERT coverage.
After this check there is only one "nasty" cast in this code but there
is a KASSERT to protect against the wrong argument structure behind
that cast.
Un-inlining the meat of VOP_FOO() saves 35kB of text segment on a typical
kernel with no change in performance.
We also now run the checking and tracing on VOP's which have been layered
by nullfs, umapfs, deadfs or unionfs.
Add new (non-inline) VOP_FOO_AP() functions which take a "struct
foo_args" argument and does everything the VOP_FOO() macros
used to do with checks and debugging code.
Add KASSERT to VOP_FOO_AP() check for argument type being
correct.
Slim down VOP_FOO() inline functions to just stuff arguments
into the struct foo_args and call VOP_FOO_AP().
Put function pointer to VOP_FOO_AP() into vop_foo_desc structure
and make VCALL() use it instead of the current offsetoff() hack.
Retire vcall() which implemented the offsetoff()
Make deadfs and unionfs use VOP_FOO_AP() calls instead of
VCALL(), we know which specific call we want already.
Remove unneeded arguments to VCALL() in nullfs and umapfs bypass
functions.
Remove unused vdesc_offset and VOFFSET().
Generally improve style/readability of the generated code.
so we need to acquire Giant in netgraph methods, so that we don't
race with line discipline methods. Remove NET_NEEDS_GIANT.
- Packets coming into node from netgraph are queued in ifqueue
attached to node private data.
- Mutex in struct ifqueue is used to lock not only the queue, but
the whole private data, and tp->t_lsc field.
- tp->t_lsc pointer is used to indicate whether line discipline is
attached to netgraph or not.
- Use FLG_DIE flag to indicate that node may be destroyed.
(This protection doesn't work, and it didn't before. Must be redesigned.)
- Increment ngt_unit atomically, removing mutex.
- Acquire Giant, when executing ngt_start() from netgraph context.
- Acquire Giant, when {,de}registering line discipline.
- Uncomment forcing queue mode on peers hook, since this is reasonable.
- Force queue mode on our hook, to avoid acquiring Giant when coming from
network stack. We may already hold some mutexes at this point.
Cleanups:
- Use callout_pending() instead of our own flag.
- Remove spl(9) calls. Now we can use return() instead of ERROUT().
style(9):
- Sort includes.
- Sparse initializer for struct linesw.
- Remove some empty lines, sort declarations.
Reviewed by: julian, phk
MFC after: 1 month
of len in tcp_output(), in the case where the FIN has already been
transmitted. The mis-computation of len is because of a gcc
optimization issue, which this change works around.
Submitted by: Mohan Srinivasan
interrupt is wired up to all the I/O APICs in the system. If the system
has only one I/O APIC, then just act as if the entry specified that APIC.
We still don't try to handle global entries in a system with multiple I/O
APICs.
Tested by: Peter Trifonov pvtrifonov at mail dot ru
MFC after: 1 week
up its pending error state, which may be set in some rare conditions resulting
in connect() syscall returning that bogus error and making application believe
that attempt to change association has failed, while it has not in fact.
There is sockets/reconnect regression test which excersises this bug.
MFC after: 2 weeks
errno can be tampered potentially by nested signal handle.
Now all error codes are returned in negative value, positive value are
reserved for future expansion.
external source (i.e., _STA). The previous case only handled calls
occurring within AML. This should fix Toshibas, among others. Thanks
to Robert Moore of Intel for the fix.
MFC after: 2 days
the given providers. Without even one of the configured components there
should be no way to get the secret.
Supported by: WHEEL Sp. z o.o.
http://www.wheel.pl
- Use callout_pending() instead of our own flags.
- Remove home-grown protection of node, which has a scheduled
callout().
- Remove spl(9) calls.
Tested by: bz
TAILQ_FOREACH_SAFE().
Loose the error pointer argument and return any errors the normal way.
Return EAGAIN for the case where more work needs to be done.
e.g. at the loader:
set hint.pcib.1.skipslot=26
This allows undocumented and problematic hardware on some systems
to be ignored, for instance, the USB keyboard/mouse that shows up
on a 12" albook that doesn't exist nor do anything other than eat up
the syscons keyboard. Another one is the unused USB cell in the old
366MHz iBook that locks up the machine when probed.
In a way this is temporary, since there are better fixes for the
above problems, but will be useful in the meantime by allowing
a keyboard to be used to help debug said fixes :)
- while here remove some trailing white space
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
read the ethernet address from the attribute space hasn't been
implemented. Also add flags for the MBH10302. The flags and maddr
fields will be used when reading from the attribute space...
recursion from the VM is handled (and the calling code that allocates
buckets knows how to deal with it), we do not want to prevent allocation
from the slab header zones (slabzone and slabrefzone) if uk_recurse is
not zero for them. The reason is that it could lead to NULL being
returned for the slab header allocations even in the M_WAITOK
case, and the caller can't handle that (this is also explained in a
comment with this commit).
The problem analysis is documented in our mailing lists:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=153445+0+archive/2004/freebsd-current/20041231.freebsd-current
(see entire thread for proper context).
Crash dump data provided by: Peter Holm <peter@holm.cc>
This is just a workaround for a know problem with Motorola E1000
phone. Something is wrong with the configuration of L2CAP/RFCOMM
channel. Even though we set L2CAP MTU to 132 bytes (default RFCOMM
MTU 127 + 5 bytes RFCOMM frame header) and the phone accepts it,
the phone still sends oversized L2CAP packets. It appears that the
phone wants to use bigger (667 bytes) RFCOMM frames, but it does
not segment them according to the configured L2CAP MTU. The 667
bytes RFCOMM frame size corresponds to the default L2CAP MTU of
672 bytes (667 + 5 bytes RFCOMM frame header).
This problem only appears if connection was initiated from the
phone. I'm not sure who is at fault here, so for now just put
workaround in place. Quick look at the spec did not reveal any
anwser.
Tested by: Jes < jjess at freebsd dot polarhome dot com >
MFC after: 3 days
allows my 3com cards to work again. It appears that this code was
once there, but I removed it when I added the alignment issues.
MFC After: 5 days
PR: 70639 (and likely others)
o Implement a shiny new algorithm to keep track of finger movement at
slow speeds. This dramatically reduces the level of questionable
language from users trying to resize windows.
o Properly catch the many extra buttons and dials which manufacturers
are known to screw onto Synaptics touchpad controllers. Currently,
up to seven buttons are known to work, more should work too.
o Add a number of sysctls allowing one to tune the driver to taste in
a simple way:
# Should the extra buttons act as axes or as middle button
hw.psm.synaptics.directional_scrolls
# These control the 'stickiness' at low speeds
hw.psm.synaptics.low_speed_threshold
hw.psm.synaptics.min_movement
hw.psm.synaptics.squelch_level
PR: kern/75725
Submitted by: Jason Kuri <jay@oneway.com>
MFC after: 1 month
fe1: <EAGLE Technology NE200 ETHERNET LAN MBH10302 04>
As reported by Sean Shapira. This appears to be working. Eagle used
Fujitsu's vendor number, with a product number of 4 (which is the same
as the vendor number, which is a little suspect). Since there's no
apparent conflict, go ahead and use it.
Submitted by: Sean Shapira
card, and works with that driver. However, Eagle is using Fujitsu's
vendor number and a product code of 4, which seems a little odd.
Still, there's no conflicts...
1/ doesn't matter on most of our architectures
2/ will never happen unless we start queueing multiple trasactions
to a single endpoint at one time (which we do not allow yet).
If anyone has a big_endian machine with EHCI they might check this
if they are having problems with EHCI but it's unlikely even there..
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
MFC after: 3 days
turns out that LINE30_ROW was always defined, not LINE30. I confused
this for LINE30 and did the unifdef -DLINE30 using that mistaken
belief. This corrects that problem.
Submitted by: nyan-san
won't exist for EBus. Just fail the allocation by returning NULL.
Now drivers that are MI can try resources that the driver knows may
be used by the device.
structures in IPX/SPX -- primarily, sequence numbering, PCB lists,
and PCBs for IPX raw sockets, IPX datagram sockets, and IPX/SPX.
As such, remove remove NET_NEEDS_GIANT() for IPX, and remove the
assertion of Giant in the ipxintr() IPX input path.
Note that IPX/SPX is not fully MPSAFE, and that there are some
problems with IPX/SPX locking that will require some further work.
However, it is now safe enough to run in general without the Giant
lock.
MFC after: 4 weeks
portion of IPX/SPX:
- Protect IPX PCB lists with the IPX PCB list mutex, in particular
when calling PCB and PCB list manipulation routines in ipx_pcb.c.
- Protect both IPX PCB state and SPX PCB state using the IPX PCB
mutex.
- Generally annotate locking, as well as adding liberal use of lock
assertions to document locking requirements.
- Where possible, use unlocked reads when reading integer or smaller
sized socket options on SPX sockets.
- De-spl throughout.
Notes:
- spx_input() expects both the list mutex and PCB mutex to be held
on entry, but will release both on return. Because sonewconn() is
called from spx_input(), it may actually drop one PCB lock and
acquire another during generation of a new connection, meaning the
caller is not in a position to unlock the PCB mutex.
MFC after: 3 weeks
were derived from more complex TCP versions of the same:
- spx_close(), spx_disconnect(), spx_drop(), and spx_usrclosed() all
always free's the spxpcb invalidating the argument, so a return
value is not required to indicate if it has.
- Annotate that the cb arguments to each of these functions is
invalidated via a comment.
- When tearing down a pcb due to sonewconn() having failed, mark the
cb as NULL; later, when deciding whether to store trace information
due to SO_DEBUG, check that cb is not NULL before dereferencing or
a NULL pointer dereference may occur.
MFC after: 3 weeks
When processing socket options against IPX PCBs, generally protect
PCB fields using the IPX PCB mutex. Where possible, use unlocked
reads on integer values to avoid locking overhead.
MFC after: 3 weeks
protocol methods relating to IPX. Conditionally acquire the PCB list
lock in the send operation only if the socket requires binding in order
to use the requested address.
Remove spl's generally no longer required during these accesses.
MFC after: 3 weeks
the IPX-related PCB routines. In general, the list lock is required
to iterate the PCB list, either for read or write; the PCB lock is
required to access or modify a PCB. To change the binding of a PCB,
both locks must be held.
MFC after: 3 weeks
IPX PCB lists. Add macros to initialize, destroy, lock, unlock,
and assert the mutex. Initialize the mutex when IPX is started.
Add per-IPX PCB mutexes, ipxp_mtx in struct ipxpcb, to protect
per-PCB IPX/SPX state. Add macros to initialize, destroy, lock,
unlock, and assert the mutex. Initialize the mutex when a new
PCB is allocated; destroy it when the PCB is free'd.
MFC after: 2 weeks
copyright/license header and was only used by 30line.h. It appears
that the copyright/license in 30line.h covers the old contents
module.h anyway, so this simplifies things a little while cleaning up
one obscure potential license confusion...
Revired by: nyan-san
- Introduce another ng_ether(4) callback ng_ether_link_state_p, which
is called from if_link_state_change(), every time link is changed.
- In ng_ether_link_state() send netgraph control message notifying
of link state change to a node connected to "lower" hook.
Reviewed by: sam
MFC after: 2 weeks
place device objects in \ (in this case, PCI links.) Work around this by
starting our probe from \. To avoid attaching system scope objects,
explicitly skip them. (I think it's an ACPI-CA bug that \_SB and \_TZ have
device and thermal object types.) Thanks to pjd@ for testing.
MFC after: 2 weeks
before deciding to do more expensive locking to account for process
exit. This acceptable minor race avoids two mutex operations in
that highly common case of accounting not being enabled.
MFC after: 2 weeks
- Fix the MP Table pci bridge drivers to not probe the configuration table
unless we actually have one. Machines using a default configuration do
not have such a table.
- Only allow default configuration types of 5 (ISA + PCI) and 6 (EISA +
PCI) as the others are not likely to work. Types 1 through 4 use an
external APIC (probably with 80486 processors) which we certainly do not
support, and type 7 uses an MCA bus which has not been tested with the
new MP Table code.
- Correct the fact that the single I/O APIC in a default configuration has
an ID of 2, not 0.
- Fix off by one errors in setting the bus types from the default_data[]
arrays for default configurations.
- Explicitly configure each of the 16 interrupt pins on the sole I/O APIC
when using a default configuration. This is especially helpful for type
6 (EISA + PCI) since the EISA interrupts need to have their polarity
programmed based on the values in the ELCR.
Much thanks to the submitter and tester who endured several rounds of
testing to get this fixed.
MFC after: 1 week
Tested by: Georg Schwarz georg dot schwarz at freenet dot de
cuts to the chase and fills in a provided s/g list. This is meant to optimize
out the cost of the callback since the callback doesn't serve much purpose for
mbufs since mbuf loads will never be deferred. This is just for amd64 and
i386 at the moment, other arches will be coming shortly.
queue and (possibly) unlocking the containing object from
vm_page_alloc() to vm_page_select_cache(). Recent optimizations to
vm_map_pmap_enter() (see vm_map.c revisions 1.362 and 1.363) and
pmap_enter_quick() have resulted in panic()s because vm_page_alloc()
mistakenly unlocked objects that had not been locked by
vm_page_select_cache().
Reported by: Peter Holm and Kris Kennaway
from 4.x kernel config files. User's wishing to upgrade from 4.x to 6
will need to go through 5.x, or grab this script from there. These
scripts will remain in RELENG_5...
queue to the free queue. With this change, if a page from the cache
queue belongs to a locked object, it is simply skipped over rather
than moved to the inactive queue.
SI_SUB_INIT_IF but before SI_SUB_DRIVERS. Make Netgraph(4)
framework initialize at SI_SUB_NETGRAPH level.
This does not address the bigger problem: MODULE_DEPEND
does not seem to work when modules are compiled in the
kernel, but it fixes the problem with Netgraph Bluetooth
device drivers reported by a few folks.
PR: i386/69876
Reviewed by: julian, rik, scottl
MFC after: 3 days
and if the client (erroneously) reads the RPC length as 0 bytes, the
client can loop around in the socket callback. Explicitly check for
the length being 0 case and teardown/re-connect.
Submitted by: Mohan Srinivasan
turn it back on. Specifically, the actual changes are now less intrusive
in that the _get_spin_lock() and _rel_spin_lock() macros now have their
contents changed for UP vs SMP kernels which centralizes the changes.
Also, UP kernels do not use _mtx_lock_spin() and no longer include it. The
UP versions of the spin lock functions do not use any atomic operations,
but simple compares and stores which allow mtx_owned() to still work for
spin locks while removing the overhead of atomic operations.
Tested on: i386, alpha
to be the same as Boca Research Turbo Serial 654 (4 serial port).
While add the 8 port variants as well.
Submitted by: sten@blinkenlights.nl
PR: kern/75793
MFC after: 1 week
The main changes are:
1. Use of multiple bus dma tags.
2. Timing of CAM requests by the driver.
3, Firmware interface change relating to retrieving AEN's.
4. Removal of twa_intrhook.
5. Bundling of latest firmware with BBU capability.
Reviewed by:re
Approved by:re
interface as well. This is not an expected revision id per the
datasheet, but unfortunately there are such cards out there with
a 82557 chipset, and they want to use the 82503.
PR: kern/75739
Reported by: Andre Albsmeier <andre.albsmeier@siemens.com>
- Mark mount, unmount and nmount MPSAFE.
- Add a stub for _umtx_op().
- Mark open(), link(), unlink(), and freebsd32_sigaction() MPSAFE.
Pointy hats to: several
(we ignore it).
- Remove code used for handling spoil events, as spoiling is not possible
anymore, because we keep consumers open for writing all the time.
MFC after: 4 days
