These controllers use newer descriptor format and the new descriptor
format uses status LE to indicate the status of checksum. Rx
checksummed value used in previous controllers were very cryptic
and I failed to understand how to use them. In addition most
controllers in previous generations had Rx checksum offloading bug.
While I'm here introduce a MSK_FLAG_NORX_CSUM flag to bypass
checking Rx checksum offloading as Yukon FE+ A0 has status LE bug.
this feature hardware automatically computes TCP/UDP payload
offset. Introduce MSK_FLAG_AUTOTX_CSUM to mark the capability.
Yukon Extreme B0 revision is known to have a silicon for the
feature so disable it. Yukon Extreme B0 still can do Tx checksum
offloading but CPU have to compute TCP/UDP payload offset. To
enable traditional checksum offloading, disable automatic Tx
checksum calculation capability.
Yukon Extreme A0 revision could not use store-and-forward mode for
jumbo frames(silicon bug) so disable Tx checksum offloading for
jumbo frames.
I believe controllers that have MSK_FLAG_AUTOTX_CSUM capability or
new descriptor format do not have Tx checksum offload bug so
disable checksum offloading workaround for for short frames.
Tested by: jhb, Warren Block ( wblock <> wonkity dot com )
Yukon Extreme uses new descriptor format for TSO and has Tx frame
parser which greatly reduces CPU cycles spent in computing TCP/UDP
payload offset calculation in Tx checksum offloading path. The new
descriptor format also removed TCP/UDP payload computation for TSO
which in turn results in better TSO performance. It seems Yukon
Extreme has a lot of new (unknown) features but only basic
offloading is supported at this time. So far there are two known
issues.
o Sometimes Rx overrun errors happen when pulling data over
gigabit link. Running over 100Mbps seem to ok.
o Ethernet hardware address shows all-zeroed value on 88E8070.
Assigning ethernet address with ifconfig is necessary to make it
work.
Support for Yukon Extreme is not perfect but it would be better
than having a non-working device. Special thanks to jbh who fixed
several bugs of initial patch.
Tested by: jhb, Warren Block ( wblock <> wonkity dot com )
o track # bpf taps on monitor mode vaps instead of # monitor mode vaps
o spam monitor mode taps on tx/rx
o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up
o while here print radiotap (and superg) state in show com
device drivers to use arbitrary VM objects to satisfy individual mmap()
requests.
- A new d_mmap_single(cdev, &foff, objsize, &object, prot) callback is
added to cdevsw. This function is called for each mmap() request.
If it returns ENODEV, then the mmap() request will fall back to using
the device's device pager object and d_mmap(). Otherwise, the method
can return a VM object to satisfy this entire mmap() request via
*object. It can also modify the starting offset into this object via
*foff. This allows device drivers to use the file offset as a cookie
to identify specific VM objects.
- vm_mmap_vnode() has been changed to call vm_mmap_cdev() directly when
mapping V_CHR vnodes. This avoids duplicating all the cdev mmap
handling code and simplifies some of vm_mmap_vnode().
- D_VERSION has been bumped to D_VERSION_02. Older device drivers
using D_VERSION_01 are still supported.
MFC after: 1 month
- Each socket upcall is now invoked with the appropriate socket buffer
locked. It is not permissible to call soisconnected() with this lock
held; however, so socket upcalls now return an integer value. The two
possible values are SU_OK and SU_ISCONNECTED. If an upcall returns
SU_ISCONNECTED, then the soisconnected() will be invoked on the
socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls. The
API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
the receive socket buffer automatically. Note that a SO_SND upcall
should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
instead of calling soisconnected() directly. They also no longer need
to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
state machine, but other accept filters no longer have any explicit
knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
while invoking soreceive() as a temporary band-aid. The plan for
the future is to add a new flag to allow soreceive() to be called with
the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
buffer locked. Previously sowakeup() would drop the socket buffer
lock only to call aio_swake() which immediately re-acquired the socket
buffer lock for the duration of the function call.
Discussed with: rwatson, rmacklem
Each list describes a logical memory object that is backed by one or more
physical address ranges. To minimize locking, the sglist objects
themselves are immutable once they are shared.
These objects may be used in the future to facilitate I/O requests using
physically-addressed buffers. For the immediate future I plan to use them
to implement a new type of VM object and pager.
Reviewed by: jeff, scottl
MFC after: 1 month
consuming one of its spare fields. The cr_flags field is currently
unused, but will be used for features, including capability mode and
pay-as-you-go audit.
Discussed with: jhb, sson
using bus_dmamap_load_mbuf_sg() on it. This
prevents data corruption when the mxge MTU is
between 4076 and 8172 on machines with 4KB
pages and MXGE_VIRT_JUMBOS is in use (which it
isn't, in -current or -stable)
an accessor function to get the correct rnh pointer back.
Update netstat to get the correct pointer using kvm_read()
as well.
This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.
Reviewed by: julian, rwatson, zec
X-MFC: not possible
* Tighten v1 query input processing.
* Borrow changes from MLDv2 for how general queries are processed.
* Do address field validation upfront before accepting input.
* Do NOT switch protocol version if old querier present timer active.
* Always clear IGMPv3 state in igmp_v3_cancel_link_timers().
* Update comments.
Tested by: deeptech71 at gmail dot com
required for options DEVICE_POLLING.
De-fragment the NETISR_ constant space and lower NETISR_MAXPROT from
32 to 16 -- when sizing queue arrays using this compile-time constant,
significant amounts of memory are saved.
Warn on the console when tunable values for netisr are automatically
adjusted during boot due to exceeding limits, invalid values, or as a
result of DEVICE_POLLING.
mic inputs. I have no idea what for it was made that time, but now I have
several reports that it should be removed to make microphones work. If
this quirk is still required for some systems then they should be identified
and specified explicitly.
threads:
- Support up to one netisr thread per CPU, each processings its own
workstream, or set of per-protocol queues. Threads may be bound
to specific CPUs, or allowed to migrate, based on a global policy.
In the future it would be desirable to support topology-centric
policies, such as "one netisr per package".
- Allow each protocol to advertise an ordering policy, which can
currently be one of:
NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
an implicit or explicit source (such as an interface or socket).
NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
as well as allowing protocols to provide a flow generation function
for mbufs without flow identifers (m2flow). Falls back on
NETISR_POLICY_SOURCE if now flow ID is available.
NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
each packet handled by netisr (m2cpuid).
- Provide utility functions for querying the number of workstreams
being used, as well as a mapping function from workstream to CPU ID,
which protocols may use in work placement decisions.
- Add explicit interfaces to get and set per-protocol queue limits, and
get and clear drop counters, which query data or apply changes across
all workstreams.
- Add a more extensible netisr registration interface, in which
protocols declare 'struct netisr_handler' structures for each
registered NETISR_ type. These include name, handler function,
optional mbuf to flow ID function, optional mbuf to CPU ID function,
queue limit, and ordering policy. Padding is present to allow these
to be expanded in the future. If no queue limit is declared, then
a default is used.
- Queue limits are now per-workstream, and raised from the previous
IFQ_MAXLEN default of 50 to 256.
- All protocols are updated to use the new registration interface, and
with the exception of netnatm, default queue limits. Most protocols
register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
NETISR_POLICY_FLOW, and will therefore take advantage of driver-
generated flow IDs if present.
- Formalize a non-packet based interface between interface polling and
the netisr, rather than having polling pretend to be two protocols.
Provide two explicit hooks in the netisr worker for start and end
events for runs: netisr_poll() and netisr_pollmore(), as well as a
function, netisr_sched_poll(), to allow the polling code to schedule
netisr execution. DEVICE_POLLING still embeds single-netisr
assumptions in its implementation, so for now if it is compiled into
the kernel, a single and un-bound netisr thread is enforced
regardless of tunable configuration.
In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.
Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.
An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking. It will be enabled once further rmlock
optimization has taken place. However, in practice, netisrs are
rarely registered or unregistered at runtime.
A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.
This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.
Bump __FreeBSD_version.
Reviewed by: bz
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
as there is no more space for more SOL_SOCKET options, but this option also
fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
functionality (currently only unjail root can use it).
Discussed with: julian, adrian, jhb, rwatson, kmacy
=================
Extend the loader to parse the root file system mount options in /etc/fstab,
and set a new loader variable vfs.root.mountfrom.options with these options.
The root mount options must be a comma-delimited string, as specified in
/etc/fstab.
Only set the vfs.root.mountfrom.options variable if it has not been
set in the environment.
sys/kern/vfs_mount.c
====================
When mounting the root file system, pass the mount options
specified in vfs.root.mountfrom.options, but filter out "rw" and "noro",
since the initial mount of the root file system must be done as "ro".
While we are here, try to add a few hints to the mountroot prompt
to give users and idea what might of gone wrong during mounting
of the root file system.
Reviewed by: jhb (an earlier patch)
