This combination doesn't make sense, unit numbers should be hardwired
only in context of a known driver. The wildcard devices should have
wildcard unit numbers.
Reviewed by: jhb
MFC after: 2 weeks
being attached. This is implemented by adding a new DS_ATTACHING state
while a device's DEVICE_ATTACH() method is being invoked. A driver is
required to not fail an attach of a busy device. The device's state will
be promoted to DS_BUSY rather than DS_ACTIVE() if the device was marked
busy during DEVICE_ATTACH().
Reviewed by: kib
MFC after: 1 week
Descriptions are specific to drivers and we don't change drivers on attached
devices. This fixes a few places where we were not clearing the description
when detaching a driver (e.g. with device_attach() failed). While here, fix
a few other nits:
- Remove spurious call to remove a device's driver from
devclass_driver_deleted(). device_detach() removes it already.
- Fix a typo.
having dereferenced it. We either should generally check the device_t's
supplied to bus functions before using them (which we seem to virtually
never do) or just assume that they are not NULL.
While at it make this code fit 78 columns.
Found with: Coverity Prevent(tm)
CID: 4230
when actually setting a driver as especially ENOMEM is fatal in these
cases.
- Annotate other calls to device_set_devclass(9) and device_set_driver(9)
without the return value being checked and that are okay to fail.
Reviewed by: yongari (slightly earlier version)
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Identify a few other places where
it makes sense to use device_delete_all_children().
MFC after: 1 week
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
wrapper around rman_adjust_resource(). Include a generic implementation,
bus_generic_adjust_resource() which passes the request up to the parent
bus. There is currently no default implementation. A
bus_adjust_resource() wrapper is provided for use in drivers.
a driver during kldunload. Specifically, recursively walk the tree of
subclasses of a given driver attachment's bus device class detaching all
instances of that driver for each class and its subclasses.
Reported by: bschmidt
Reviewed by: imp
MFC after: 1 week
This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.
Followup to: r212213
MFC after: 10 days
Also change int -> u_int for order parameter in device_add_child_ordered.
There should not be any ABI change as struct device is private to subr_bus.c
and the API change should be compatible.
To do: change int -> u_int for order parameter of bus_add_child method
and its implementations. The change should also be API compatible, but
is a bit more churn.
Suggested by: imp, jhb
MFC after: 1 week
flags to specify M_WAITOK/M_NOWAIT. M_WAITOK allows devctl to sleep for
the memory allocation.
As Warner noted, allowing the functions to sleep might cause
reordering of the queued notifications.
Reviewed by: imp, jh
MFC after: 3 weeks
active.
- Fix bus_generic_rl_(alloc|release)_resource() to not attempt to fetch a
resource list for grandchild devices, but just pass those requests up to
the parent directly. This worked by accident previously, but it is
better to not let bus drivers try to operate on devices they do not
manage.
are not allocated by the device driver. These resources should still appear
allocated from the system's perspective so that their assigned ranges are
not reused by other resource requests. The PCI bus driver has used a hack
to effect this for a while now where it uses rman_set_device() to assign
devices to the PCI bus when they are first encountered and later assigns
them to the actual device when a driver allocates a BAR. A few downsides of
this approach is that it results in somewhat confusing devinfo -r output as
well as not being very easily portable to other bus drivers.
This commit adds generic support for "reserved" resources to the resource
list API used by many bus drivers to manage the resources of child devices.
A resource may be reserved via resource_list_reserve(). This will allocate
the resource from the bus' parent without activating it.
resource_list_alloc() recognizes an attempt to allocate a reserved resource.
When this happens it activates the resource (if requested) and then returns
the reserved resource. Similarly, when a reserved resource is released via
resource_list_release(), it is deactivated (if it is active) and the
resource is then marked reserved again, but is left allocated from the
bus' parent. To completely remove a reserved resource, a bus driver may
use resource_list_unreserve(). A bus driver may use resource_list_busy()
to determine if a reserved resource is allocated by a child device or if
it can be unreserved.
The PCI bus driver has been changed to use this framework instead of
abusing rman_set_device() to keep track of reserved vs allocated resources.
Submitted by: imp (an older version many moons ago)
MFC after: 1 month
on the assumption that the unit linked with the device is invariant but
that can change when calling devclass_alloc_unit() (because -1 is passed
or, more simply, because the unit choosen is beyond the table limits).
This results in a completely bogus string building.
Fix this by reserving the necessary room for all the possible characters
printable by a positive integer (we do not allow for negative unit
number).
Reported by: Sandvine Incorporated
Reviewed by: emaste
Sponsored by: Sandvine Incorporated
MFC: 1 week
td_name[] arrays are actually MAXCOMLEN + 1 in size and a few places that
created shadow copies of these arrays were just using MAXCOMLEN.
- Prefer using sizeof() of an array type to explicit constants for the
array length in a few places.
- Ensure that all of p_comm[] and td_name[] is always zero'd during
execve() to guard against any possible information leaks. Previously
trailing garbage in p_comm[] could be leaked to userland in ktrace
record headers via td_name[].
Reviewed by: bde
sooner so it is always valid when a driver's identify routine is
called. Previously, new-bus would attempt to create the devclass for
a newly loaded driver in two separate places, once in
devclass_add_driver(), and again after devclass_add_driver() returned
in driver_module_handler(). Only the second lookup attempted to set a
device class' parent and set the devclass_t pointer specified in the
DRIVER_MODULE() macro. However, by the time it was executed, the
driver was already added to existing instances of the parent driver at
which point in time the new driver's identify routine would have been
invoked. The fix is to merge the two attempts and only create the
devclass once in devclass_add_driver() including setting the
devclass_t pointer passed to DRIVER_MODULE() before the driver is
added to any existing bus devices.
Reported by: avg
Reviewed by: imp
MFC after: 2 weeks
handlers. This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
a description with an active interrupt handler setup by BUS_SETUP_INTR.
It has a default method (bus_generic_describe_intr()) which simply passes
the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
an interrupt handler and copy the name passed to intr_event_add_handler()
into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64 and i386 by having
the nexus(4) driver supply a custom bus_describe_intr method that invokes
a new intr_describe() MD routine which in turn looks up the associated
interrupt event and invokes intr_event_describe_handler().
Requested by: many
Reviewed by: scottl
MFC after: 2 weeks
driver load. This fixes crash on atapicam module load on systems,
where some ata channels (usually ata1) was probed, but failed to attach.
Reviewed by: jhb, imp
Tested by: many
reused by the enhached newbus locking once it is checked in.
This change can be easilly MFCed to STABLE_8 at the appropriate moment.
Reviewed by: jhb, scottl
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
While usually not an issue, this firewalls bugs in the code that may
run us out of memory.
Fix a memory exhaustion in the case where devctl was disabled, but the
link was bouncing. The check to queue was in the wrong place.
Implement a new sysctl hw.bus.devctl_queue to control the depth. Make
compatibility hacks for hw.bus.devctl_disable to ease transition.
Reviewed by: emaste@
Approved by: re@ (kib)
MFC after: asap
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.
Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.
For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.
Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.
Bump __FreeBSD_version in order to reflect the newbus lock introduction.
Reviewed by: ed, hps, jhb, imp, mav, scottl
No answer by: ariff, thompsa, yongari
Tested by: pho,
G. Trematerra <giovanni dot trematerra at gmail dot com>,
Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by: Yahoo! Incorporated
Approved by: re (ksmith)
probe. The current device order is unchanged. This commit just adds the
infrastructure and ABI changes so that it is easier to merge later changes
into 8.x.
- Driver attachments now have an associated pass level. Attachments are
not allowed to probe or attach to drivers until the system-wide pass level
is >= the attachment's pass level. By default driver attachments use the
"last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during
an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which
accepts the pass level as an additional parameter.
- A new method BUS_NEW_PASS has been added to the bus interface. This
method is invoked when the system-wide pass level is changed to kick off
a rescan of the device tree so that drivers that have just been made
"eligible" can probe and attach.
- The bus_generic_new_pass() function provides a default implementation of
BUS_NEW_PASS(). It first allows drivers that were just made eligible for
this pass to identify new child devices. Then it propogates the rescan to
child devices that already have an attached driver by invoking their
BUS_NEW_PASS() method. It also reprobes devices without a driver.
- BUS_PROBE_NOMATCH() is only invoked for devices that do not have
an attached driver after being scanned during the final pass.
- The bus_set_pass() function is used during boot to raise the pass level.
Currently it is only called once during root_bus_configure() to raise
the pass level to BUS_PASS_DEFAULT. This has the effect of probing all
devices in a single pass identical to previous behavior.
Reviewed by: imp
Approved by: re (kib)
