"io" is the default, and allows VGA i/o registers to be
accessed. This is required by Win7/2k8 graphics guests that
use a combination of BIOS int10 and UEFI.
"off" disables all VGA i/o and mem accesses.
"on" is not yet hooked up, but will enable full VGA rendering.
OpenBSD/UEFI >= 5.9 graphics guests can be booted using "vga=off"
- Allow "rfb" to be used instead of "tcp" for the fbuf VNC
description. "tcp" will be removed at a future point and is
kept as an alias.
Discussed with: Leon Dang
MFC after: 3 days
injected without state being set up.
This fixes a core dump when dropping to the UEFI prompt
with graphics enabled and moving the mouse around.
Discussed with: Leon Dang
MFC after: 3 days
There seems no hard limit on number of segments per packet in the chip,
and 20 appeared insufficient. Hope 64 will be enough, but if not -- add
check to report that and drop the packet instead of corrupting stack.
This makes factual interrupt routing match one shipped with UEFI firmware.
With old firmware this make legacy interrupts work reliable for functions 0
of PCI slots 3-6. Updated UEFI image fixes problem completely.
The code was successfully tested with FreeBSD, Linux, Solaris and Windows
guests. This interface is predictably slower (about 2x) then virtio-net,
but it is very helpful for guests not supporting virtio-net by default.
Thanks to Jeremiah Lott and Peter Grehan for doing original heavy lifting.
It was useless before, but may improve performance now if multiple devices
are configured and guest supports this feature.
Sponsored by: iXsystems, Inc.
While old syntax is still supported, new syntax looks like this:
-s 3,ahci,hd:/dev/zvol/XXX,hd:/dev/zvol/YYY,cd:/storage/ZZZ.iso
Sponsored by: iXsystems, Inc.
Add `WRAPPED_CTASSERT` macro by annotating CTASSERTs with __unused
to deal with -Wunused-local-typedefs warnings from gcc 4.8+.
All other compilers (clang, etc) use CTASSERT as-is. A more generic
solution for this issue will be proposed after ^/stable/11 is forked.
Consolidate all CTASSERTs under one block instead of inlining them in
functions.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
Put cfl/prdt under AHCI_DEBUG #defines as they are only used in
those cases.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
this on the branch.
Original commit message:
Initial bhyve native graphics support.
This adds emulations for a raw framebuffer device, PS2 keyboard/mouse,
XHCI USB controller and a USB tablet.
A simple VNC server is provided for keyboard/mouse input, and graphics
output.
A VGA emulation is included, but is currently disconnected until an
additional bhyve change to block out VGA memory is committed.
Credits:
- raw framebuffer, VNC server, XHCI controller, USB bus/device emulation
and UEFI f/w support by Leon Dang
- VGA, console/g, initial VNC server by tychon@
- PS2 keyboard/mouse jointly done by tychon@ and Leon Dang
- hypervisor framebuffer mem support by neel@
Tested by: Michael Dexter, in a number of revisions of this code.
With the appropriate UEFI image, FreeBSD, Windows and Linux guests can
installed and run in graphics mode using the UEFI/GOP framebuffer.
Approved by: re (gjb)
A couple of minor memory size option related nits:
- use common name 'memsize' (instead of 'max-size' or just 'size')
- bhyve: update usage with memsize unit suffix, drop legacy "MB"
unit
- bhyveload: update usage with memsize unit suffix
- bhyve(8): document default size
- bhyveload(8): use memsize formatting like it's done
in bhyve(8)
Reviewed by: wblock, grehan
Approved by: re (kib), wblock, grehan
Differential Revision: https://reviews.freebsd.org/D6952
When bhyve cannot open a backing file, it now says explicitly which file
could not be opened
Note that the change has only be maed in block_if.c and not in
pci_virtio_block.c as the error will always be catched by the first
PR: 202321 (different patch)
Reviewed by: grehan
MFC after: 3 day
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D6576
Previously, many errors (such as the PCI device not being attached
to the ppt(4) driver) resulted in bhyve silently exiting without
starting the virtual machine. Now any errors encountered when
configuring a virtual slot for a PCI passthru device should be noted
on stderr.
Reviewed by: neel
Differential Revision: https://reviews.freebsd.org/D5990
If the PBA shares a page with the MSI-X table, map the shared page via
/dev/mem and emulate accesses to the portion of the PBA in the shared
page by accessing the mapped page.
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5919
ncq was not being inititialized properly but it was not actually
necessary either, so make the code smaller by removing it.
CID: 1248842
Reviewed by: grehan
The buffer length should be checked to avoid overflow, but there
is no API to get the slot length, so the hardcoded value is used.
Return the currently-first request chain back to the available
queue if there are no more packets.
Report the link as up if we managed to open vale port.
Use consistent coding style.
Submitted by: btw
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5595
