previous seek location was 0. Without this, readdir() would see
dd_loc of zero and call getdirentries() which would start reading
entries at the current seek location of the directory ignoring the
first batch of entries. Also, rewinddir() should always seek so that
it reads the directory from the beginning to get updated entries.
PR: 192935
Reported by: iron@mail.ua
MFC after: 3 days
requires the return value of telldir() to equal the value passed to
seekdir(). The current seekdir code with SINGLEUSE enabled breaks
this case as each call to telldir() allocates a new cookie. Instead,
remove the SINGLEUSE code and change telldir() to look for an existing
cookie for the directory's current location rather than always creating
a new cookie.
CR: https://phabric.freebsd.org/D490
PR: 121656
Reviewed by: jilles
MFC after: 1 week
after an intervening call to rewinddir() is undefined, so reclaim any
pending telldir() cookies in the directory when rewinddir() is called.
CR: D459
Reviewed by: jilles
MFC after: 1 week
arc4random.c
- CVS rev. 1.22
Change arc4random_uniform() to calculate ``2**32 % upper_bound'' as
``-upper_bound % upper_bound''. Simplifies the code and makes it the
same on both ILP32 and LP64 architectures, and also slightly faster on
LP64 architectures by using a 32-bit remainder instead of a 64-bit
remainder.
- CVS rev. 1.23
Spacing
readpassphrase.c
-CVS rev. v 1.24
most obvious unsigned char casts for ctype
Obtained from: OpenBSD
MFC after: 5 days
- In the unionfs case, opendir() and fdopendir() read the directory's full
contents and cache it. This cache is not refreshed when rewinddir() is
called, so rewinddir() will not notice updates to a directory. Fix this
by splitting the code to fetch a directory's contents out of
__opendir_common() into a new _filldir() function and call this from
rewinddir() when operating on a unionfs directory.
- If rewinddir() is called on a directory opened with fdopendir() before
any directory entries are fetched, rewinddir() will not adjust the seek
location of the backing file descriptor. If the file descriptor passed
to fdopendir() had a non-zero offset, the rewinddir() will not rewind to
the beginning. Fix this by always seeking back to 0 in rewinddir().
This means the dd_rewind hack can also be removed.
While here, add missing locking to rewinddir().
CR: https://phabric.freebsd.org/D312
Reviewed by: jilles
MFC after: 1 week
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
actual file storing the semaphore object is different from the file
created on the first open. Store the file st_dev and st_ino members
of the struct stat in the semaphore structure on open, and compare
them with the attributes of the opened file to detect unlink and
re-creation.
This fixes an issue of sem_unlink(3) failing to flush the named entry
in the semaphore list for the current or remote process, making
sem_unlink(3) not correctly operating if the unlinked semaphore is
still opened.
Reported by: Joris Giovannangeli <joris@giovannangeli.fr>
PR: standards/189353
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pointer for the login name (result). Make sure to handle that
case properly. Improve robustness by checking namelen and then
nul-terminating the provided buffer to simplify subsequent logic.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
Make fts_open(3) treat an empty pathname like any other pathname that cannot
be lstatted because of [ENOENT].
It is rather confusing if rm -rf file1 "" file2 does not remove file1 and
file2.
PR: bin/187264
MFC after: 2 weeks
if not already defined. This allows building libc from outside of
lib/libc using a reach-over makefile.
A typical use-case is to build a standard ILP32 version and a COMPAT32
version in a single iteration by building the COMPAT32 version using a
reach-over makefile.
Obtained from: Juniper Networks, Inc.
If rare conditions such as concurrent conflicting manipulation of the
filesystem occur, fts_read() frees the current FTSENT without adjusting
the pointers in the FTS accordingly. A later fts_close() then frees the
same FTSENT again.
Reported by: pho
Tested by: pho
MFC after: 1 week
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
As a result, the kernel needs to process shorter pathnames if fts is not
changing directories (if fts follows symlinks (-L option to utilities), fts
cannot open "." or FTS_NOCHDIR was specified).
Side effect: If pathnames exceed PATH_MAX, [ENAMETOOLONG] is not hit at the
stat stage but later (opendir or application fts_accpath) or not at all.
Even though not all race conditions can be fixed if the 'e' option is not
used, still fix some race conditions using pipe2():
* Prevent both ends of the pipe from leaking to a concurrent popen().
* Prevent the child process's end of the pipe from leaking to any concurrent
fork and exec.
This change also simplifies the code.
This ensures strerror() and friends continue to work correctly even if a
(non-PIE) executable linked against an older libc imports sys_errlist (which
causes sys_errlist to refer to the executable's copy with a size fixed when
that executable was linked).
The executable's use of sys_errlist remains broken because it uses the
current value of sys_nerr and may access past the bounds of the array.
Different from the message "Using sys_errlist from executables is not
ABI-stable" on freebsd-arch, this change does not affect the static library.
There seems no reason to prevent overriding the error messages in the static
library.
and CIFS file attributes as BSD stat(2) flags.
This work is intended to be compatible with ZFS, the Solaris CIFS
server's interaction with ZFS, somewhat compatible with MacOS X,
and of course compatible with Windows.
The Windows attributes that are implemented were chosen based on
the attributes that ZFS already supports.
The summary of the flags is as follows:
UF_SYSTEM: Command line name: "system" or "usystem"
ZFS name: XAT_SYSTEM, ZFS_SYSTEM
Windows: FILE_ATTRIBUTE_SYSTEM
This flag means that the file is used by the
operating system. FreeBSD does not enforce any
special handling when this flag is set.
UF_SPARSE: Command line name: "sparse" or "usparse"
ZFS name: XAT_SPARSE, ZFS_SPARSE
Windows: FILE_ATTRIBUTE_SPARSE_FILE
This flag means that the file is sparse. Although
ZFS may modify this in some situations, there is
not generally any special handling for this flag.
UF_OFFLINE: Command line name: "offline" or "uoffline"
ZFS name: XAT_OFFLINE, ZFS_OFFLINE
Windows: FILE_ATTRIBUTE_OFFLINE
This flag means that the file has been moved to
offline storage. FreeBSD does not have any special
handling for this flag.
UF_REPARSE: Command line name: "reparse" or "ureparse"
ZFS name: XAT_REPARSE, ZFS_REPARSE
Windows: FILE_ATTRIBUTE_REPARSE_POINT
This flag means that the file is a Windows reparse
point. ZFS has special handling code for reparse
points, but we don't currently have the other
supporting infrastructure for them.
UF_HIDDEN: Command line name: "hidden" or "uhidden"
ZFS name: XAT_HIDDEN, ZFS_HIDDEN
Windows: FILE_ATTRIBUTE_HIDDEN
This flag means that the file may be excluded from
a directory listing if the application honors it.
FreeBSD has no special handling for this flag.
The name and bit definition for UF_HIDDEN are
identical to the definition in MacOS X.
UF_READONLY: Command line name: "urdonly", "rdonly", "readonly"
ZFS name: XAT_READONLY, ZFS_READONLY
Windows: FILE_ATTRIBUTE_READONLY
This flag means that the file may not written or
appended, but its attributes may be changed.
ZFS currently enforces this flag, but Illumos
developers have discussed disabling enforcement.
The behavior of this flag is different than MacOS X.
MacOS X uses UF_IMMUTABLE to represent the DOS
readonly permission, but that flag has a stronger
meaning than the semantics of DOS readonly permissions.
UF_ARCHIVE: Command line name: "uarch", "uarchive"
ZFS_NAME: XAT_ARCHIVE, ZFS_ARCHIVE
Windows name: FILE_ATTRIBUTE_ARCHIVE
The UF_ARCHIVED flag means that the file has changed and
needs to be archived. The meaning is same as
the Windows FILE_ATTRIBUTE_ARCHIVE attribute, and
the ZFS XAT_ARCHIVE and ZFS_ARCHIVE attribute.
msdosfs and ZFS have special handling for this flag.
i.e. they will set it when the file changes.
sys/param.h: Bump __FreeBSD_version to 1000047 for the
addition of new stat(2) flags.
chflags.1: Document the new command line flag names
(e.g. "system", "hidden") available to the
user.
ls.1: Reference chflags(1) for a list of file flags
and their meanings.
strtofflags.c: Implement the mapping between the new
command line flag names and new stat(2)
flags.
chflags.2: Document all of the new stat(2) flags, and
explain the intended behavior in a little
more detail. Explain how they map to
Windows file attributes.
Different filesystems behave differently
with respect to flags, so warn the
application developer to take care when
using them.
zfs_vnops.c: Add support for getting and setting the
UF_ARCHIVE, UF_READONLY, UF_SYSTEM, UF_HIDDEN,
UF_REPARSE, UF_OFFLINE, and UF_SPARSE flags.
All of these flags are implemented using
attributes that ZFS already supports, so
the on-disk format has not changed.
ZFS currently doesn't allow setting the
UF_REPARSE flag, and we don't really have
the other infrastructure to support reparse
points.
msdosfs_denode.c,
msdosfs_vnops.c: Add support for getting and setting
UF_HIDDEN, UF_SYSTEM and UF_READONLY
in MSDOSFS.
It supported SF_ARCHIVED, but this has been
changed to be UF_ARCHIVE, which has the same
semantics as the DOS archive attribute instead
of inverse semantics like SF_ARCHIVED.
After discussion with Bruce Evans, change
several things in the msdosfs behavior:
Use UF_READONLY to indicate whether a file
is writeable instead of file permissions, but
don't actually enforce it.
Refuse to change attributes on the root
directory, because it is special in FAT
filesystems, but allow most other attribute
changes on directories.
Don't set the archive attribute on a directory
when its modification time is updated.
Windows and DOS don't set the archive attribute
in that scenario, so we are now bug-for-bug
compatible.
smbfs_node.c,
smbfs_vnops.c: Add support for UF_HIDDEN, UF_SYSTEM,
UF_READONLY and UF_ARCHIVE in SMBFS.
This is similar to changes that Apple has
made in their version of SMBFS (as of
smb-583.8, posted on opensource.apple.com),
but not quite the same.
We map SMB_FA_READONLY to UF_READONLY,
because UF_READONLY is intended to match
the semantics of the DOS readonly flag.
The MacOS X code maps both UF_IMMUTABLE
and SF_IMMUTABLE to SMB_FA_READONLY, but
the immutable flags have stronger meaning
than the DOS readonly bit.
stat.h: Add definitions for UF_SYSTEM, UF_SPARSE,
UF_OFFLINE, UF_REPARSE, UF_ARCHIVE, UF_READONLY
and UF_HIDDEN.
The definition of UF_HIDDEN is the same as
the MacOS X definition.
Add commented-out definitions of
UF_COMPRESSED and UF_TRACKED. They are
defined in MacOS X (as of 10.8.2), but we
do not implement them (yet).
ufs_vnops.c: Add support for getting and setting
UF_ARCHIVE, UF_HIDDEN, UF_OFFLINE, UF_READONLY,
UF_REPARSE, UF_SPARSE, and UF_SYSTEM in UFS.
Alphabetize the flags that are supported.
These new flags are only stored, UFS does
not take any action if the flag is set.
Sponsored by: Spectra Logic
Reviewed by: bde (earlier version)
function, but returns directory file descriptor instead of closing it.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
The variable _logname_valid is not exported via the version script;
therefore, change C and i386/amd64 assembler code to remove indirection
(which allowed interposition). This makes the code slightly smaller and
faster.
Also, remove #define PIC_GOT from i386/amd64 in !PIC mode. Without PIC,
there is no place containing the address of each variable, so there is no
possible definition for PIC_GOT.
I removed functionality not proposed for POSIX in Austin group issue #411.
A man page (my own) and test cases will follow in later commits.
PR: 176233
Submitted by: Jukka Ukkonen
any character including '\0', but our version replace escaped '\0'
with '\\'.
I.e. fnmatch("\\", "\\", 0) should not match while fnmatch("\\", "", 0)
should (Linux and NetBSD does the same). Was vice versa.
PR: 181129
MFC after: 1 week
check_deferred_signal() returns twice, since handle_signal() emulates
the return from the normal signal handler by sigreturn(2)ing the
passed context. Second return is performed on the destroyed stack
frame, because __fillcontextx() has already returned. This causes
undefined and bad behaviour, usually the victim thread gets SIGSEGV.
Avoid nested frame and the need to return from it by doing direct call
to getcontext() in the check_deferred_signal() and using a new private
libc helper __fillcontextx2() to complement the context with the
extended CPU state if the deferred signal is still present.
The __fillcontextx() is now unused, but is kept to allow older
libthr.so to be used with the new libc.
Mark __fillcontextx() as returning twice [1].
Reported by: pgj
Pointy hat to: kib
Discussed with: dim
Tested by: pgj, dim
Suggested by: jilles [1]
MFC after: 1 week
If 'e' is used, the kernel must support the recently added pipe2() system
call.
The use of pipe2() with O_CLOEXEC also fixes race conditions between
concurrent popen() calls from different threads, even if the close-on-exec
flag on the fd of the returned FILE is later cleared (because popen() closes
all file descriptors from earlier popen() calls in the child process).
Therefore, this approach should be used in all cases when pipe2() can be
assumed present.
The old version of popen() rejects "re" and "we" but treats "r+e" like "r+".
The ability to clear a file descriptor's close-on-exec flag via
posix_spawn_file_actions_adddup2() is in fact proposed in Austin Group issue
#411.
MFC after: 1 week
As per POSIX.1-2008, posix_spawn_file_actions_add* return [EBADF] if a file
descriptor is negative, not [EINVAL]. The bug was only in the manual page;
the code is correct.
MFC after: 1 week
The functions utx_active_add(), utx_active_remove(), utx_lastlogin_add() and
utx_log_add() set errno to 0 if they are successful. This not only violates
POSIX if pututxline() is successful, but may also overwrite a valid error
with 0 if, for example, utx_lastlogin_add() fails while utx_log_add()
succeeds.
Reviewed by: ed
signal.
- Fix the old ksem implementation for POSIX semaphores to not restart
sem_wait() or sem_timedwait() if interrupted by a signal.
MFC after: 1 week
Words in shell script are separated by spaces or tabs independent of the
value of IFS. The value of IFS is only relevant for the result of
substitutions. Therefore, there should be a space between 'wordexp' and the
words to be expanded, not an IFS character.
Paranoia might dictate that the shell ignore IFS from the environment (even
though our sh currently uses it), so do not depend on it in the new test
case.
multibyte support[0] and the new functions strenvisx and strsenvisx.
Add MLINKS for vis(3) functions add by this and the initial import from
NetBSD[1].
PR: bin/166364, bin/175418
Submitted by: "J.R. Oldroyd" <fbsd@opal.com>[0]
stefanf[1]
Obtained from: NetBSD
MFC after: 2 weeks
system call, which has a nice property - it never fails, so it is a bit
easier to use. If there is no support for capability mode in the kernel
the function will return false (not in a sandbox). If the kernel is compiled
with the support for capability mode, the function will return true or false
depending if the calling process is in the capability mode sandbox or not
respectively.
Sponsored by: The FreeBSD Foundation
* Reopen the directory using openat(fd, ".", ...) instead of opening the
pathname again. This fixes a race condition where the meaning of the
pathname changes and allows a reopen with fdopendir().
* Always reopen the directory for union stacks, not only when DTF_REWIND
is passed. Applications should be able to fchdir(dirfd(dir)) and
*at(dirfd(dir), ...). DTF_REWIND now does nothing.
There are uncommon cases where fts_safe_changedir() may be called with a
non-NULL name that is not "..". Do not block or worse if an attacker put (a
(symlink to) a fifo or device where a directory used to be.
MFC after: 1 week
path longer than this.
- Fix an unreached case of check against sizeof buf, which in turn leads
to an off-by-one nul byte write on the stack. The original condition
can never be satisfied because the passed boundary is the maximum value
that can be returned, so code was harmless.
MFC after: 1 month
NetBSD's. This output size limited versions of vis and unvis functions
as well as a set of vis variants that allow arbitrary characters to be
specified for encoding.
Finally, MIME Quoted-Printable encoding as described in RFC 2045 is
supported.
The changes were derived from what has been committed to NetBSD, with
modifications. These are:
1. Preserve the existsing GLOB_LIMIT behaviour by including the number
of matches to the set of parameters to limit.
2. Change some of the limits to avoid impacting normal use cases:
GLOB_LIMIT_STRING - change from 65536 to ARG_MAX so that glob(3)
can still provide a full command line of expanded names.
GLOB_LIMIT_STAT - change from 128 to 1024 for no other reason than
that 128 feels too low (it's not a limit that impacts the
behaviour of the test program listed in CVE-2010-2632).
GLOB_LIMIT_PATH - change from 1024 to 65536 so that glob(3) can
still provide a fill command line of expanded names.
3. Protect against buffer overruns when we hit the GLOB_LIMIT_STAT or
GLOB_LIMIT_READDIR limits. We append SEP and EOS to pathend in
those cases. Return GLOB_ABORTED instead of GLOB_NOSPACE when we
would otherwise overrun the buffer.
This change also modifies the existing behaviour of glob(3) in case
GLOB_LIMIT is specifies by limiting the *new* matches and not all
matches. This is an important distinction when GLOB_APPEND is set or
when the caller uses a non-zero gl_offs. Previously pre-existing
matches or the value of gl_offs would be counted in the number of
matches even though the man page states that glob(3) would return
GLOB_NOSPACE when gl_matchc or more matches were found.
The limits that cannot be circumvented are GLOB_LIMIT_STRING and
GLOB_LIMIT_PATH all others can be crossed by simply calling glob(3)
again and with GLOB_APPEND set.
The entire description above applies only when GLOB_LIMIT has been
specified of course. No limits apply when this flag isn't set!
Obtained from: Juniper Networks, Inc
equivalent to malloc(size). This eliminates the conditional expression
used for calling either realloc() or malloc() when realloc() will do
all the time.
free and clear the gl_pathv pointer in the glob_t structure. Such
breaks the invariant of the glob_t structure, as stated in the comment
right in front of the globextend() function. If gl_pathv was non-NULL,
then gl_pathc was > 0. Making gl_pathv a NULL pointer without also
setting gl_pathc to 0 is wrong.
Since we otherwise don't free the memory associated with a glob_t in
error cases, it's unlikely that this change will cause a memory leak
that wasn't already there to begin with. Callers of glob(3) must
call globfree(3) irrespective of whether glob(3) returned an error
or not.
libc.a and libc_p.a. In addition, define isnan in libm.a and libm_p.a,
but not in libm.so.
This makes it possible to statically link executables using both isnan
and isnanf with libc and libm.
Tested by: kargl
MFC after: 1 week
This adds two features:
* uid_from_user() and gid_from_group() as the reverse of user_from_uid()
and groups_from_gid().
* pwcache_userdb() and pwcache_groupdb() which allow alternative lookup
functions to be used. For example lookups from passwd and group
databases in a non-standard location.
This fixes a race condition where another thread may fork() before CLOEXEC
is set, unintentionally passing the descriptor to the child process.
This commit only adds O_CLOEXEC flags to open() or openat() calls where no
fcntl(fd, F_SETFD, FD_CLOEXEC) follows. The separate fcntl() call still
leaves a race window so it should be fixed later.
Because fts keeps internal file descriptors open across calls, making such
descriptors close-on-exec helps not only multi-threaded applications but
also single-threaded applications.
In particular, this prevents passing a temporary file descriptor for saving
the current directory to processes created via find -exec.
On Windows, AUX is the auxiliary device, usually pointing to COM1.
Therefore it is forbidden to create a file named aux.c. To make it a bit
easier for Windows users to check out our source code, rename this file
to auxv.c.
MFC after: 1 month
Discussed with: kib
Suggested by: Eric van Gyzen <eric vangyzen net>
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this. POSIX does have a requirement on the
application that maxfds not exceed {OPEN_MAX}, but does not require the
implementation to check it ("may fail").
PR: 95239
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this.
PR: 95239
Submitted by: Todd Miller
This method is more sandbox-friendly and also should be faster as only
one syscall is needed instead of three.
In case of an error fall back to the old method.
Reviewed by: simon, gleb
MFC after: 2 weeks
clock_gettime(2) functions if supported. The speedup seen in
microbenchmarks is in range 4x-7x depending on the hardware.
Only amd64 and i386 architectures are supported. Libc uses rdtsc and
kernel data to calculate current time, if enabled by kernel.
Hopefully, this code is going to migrate into vdso in some future.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
string buffer for each linelist l_line into one large string. Since
linelists parsed out during the previous passes store the pointers to
previously allocated l_lines, the reallocation caused undefined
behaviour on accessing the buffers, and quite deterministic fault on
freeing them (in mountd(8) startup).
This fixes reading of netgroup(5) file which contains more then one
netgroup.
Discussed with: ghelmer
MFC after: 3 days
avoid creating bad entries in the grp list as a result of memory allocation
failures while building new entries.
PR: bin/83340
Reviewed by: delphij (prior version of patch)
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
prior to 3.0.0 release). This fixes several bugs related to memory
initialization.
Mangle __jemalloc_a0{malloc,calloc,free}() just like all the other
library-internal symbols in jemalloc, and adjust the tls allocation code
in libc to use the mangled names.
prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc.
The code being imported by this commit diverged from
lib/libc/stdlib/malloc.c in March 2010, which means that a portion of
the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries
for all subsequent releases.
is already open in this process.
If the named semaphore is already open, sem_open() only increments a
reference count and did not take the flags into account (which otherwise
happens by passing them to open()). Add an extra check for O_CREAT|O_EXCL.
PR: kern/166706
Reviewed by: davidxu
MFC after: 10 days
application destroys semaphore after sem_wait returns. Just enter
kernel to wake up sleeping threads, only update _has_waiters if
it is safe. While here, check if the value exceed SEM_VALUE_MAX and
return EOVERFLOW if this is true.
Because the utmpx interface is generally not required to be thread-safe,
but it is nice to have, if easy to do so. Therefore don't make a mess
out of the code and only use it if __NO_TLS is not defined.
no waiters, we still increase and decrease count in user mode without
entering kernel, once there is a waiter, sem_post will enter kernel to
increase count and wake thread up, this is atomicy and allow us to
gracefully destroy semaphore after sem_wait returned.
pathnames.
With the current API (no *at functions), FTS_NOCHDIR requires that the
fts_accpath start with the original path passed to fts_open(); therefore,
the depth that can be reached is limited by the {PATH_MAX} constraint on
this pathname.
MFC after: 1 week
- Fix TLS allocation for Variant I: both rtld and libc allocators
assume that tls_static_space includes space for TLS structure.
So increment calculated static size by the size of it.
syscall. Before r5958, seekdir() was called for its side effect of
freeing memory allocated by opendir() for rewinddir(), but that revision
added _reclaim_telldir() that frees all memory allocated by telldir()
calls, making this call redundant.
This introduces a slight change. If an application duplicated the descriptor
obtained through dirfd(), it can no longer rely on file position to be
reset to the start of file after a call to closedir(). It's believed to
be safe because neither POSIX, nor any other OS I've tested (NetBSD, Linux,
OS X) rewind the file offset pointer on closedir().
Reported by: Igor Sysoev
They were made excessive in r205424 by opening with O_DIRECTORY.
Also eliminated the fcntl() call used to set FD_CLOEXEC by opening
with O_CLOEXEC.
(fdopendir() still checks that the passed descriptor is a directory,
and sets FD_CLOEXEC on it.)
Reviewed by: ed
according to POSIX document, the clock ID may be dynamically allocated,
it unlikely will be in 64K forever. To make it future compatible, we
pack all timeout information into a new structure called _umtx_time, and
use fourth argument as a size indication, a zero means it is old code
using timespec as timeout value, but the new structure also includes flags
and a clock ID, so the size argument is different than before, and it is
non-zero. With this change, it is possible that a thread can sleep
on any supported clock, though current kernel code does not have such a
POSIX clock driver system.
initialize the cache of the system information as it was done for the
dynamic libc. This removes several sysctls from the static binary
startup.
Use the aux vector to fill the single struct dl_phdr_info describing
the static binary itself, to implement dl_iterate_phdr(3) for the
static binaries. [1]
Based on the submission by: John Marino <draco marino st> [1]
Tested by: flo (sparc64)
MFC after: 2 weeks
The reasoning behind this, is that if we are consistent in our
documentation about the uint*_t stuff, people will be less tempted to
write new code that uses the non-standard types.
I am not going to bump the man page dates, as these changes can be
considered style nits. The meaning of the man pages is unaffected.
MFC after: 1 month
At first, I added a utility called utxrm(8) to remove stale entries from
the user accounting database. It seems there are cases in which we need
to perform different operations on the database as well. Simply rename
utxrm(8) to utx(8) and place the old code under the "rm" command.
In addition to "rm", this tool supports "boot" and "shutdown", which are
going to be used by an rc-script which I am going to commit separately.
If the utmpx database gets updated while an application is reading it,
there is a chance the reading application processes partially
overwritten entries. To solve this, make sure we always read a multiple
of sizeof(struct futx) at a time.
MFC after: 2 weeks
on extended and extensible structs if_msghdrl and ifa_msghdrl. This
will allow us to extend both the msghdrl structs and eventually if_data
in the future without breaking the ABI.
Bump __FreeBSD_version to allow ports to more easily detect the new API.
Reviewed by: glebius, brooks
MFC after: 3 days
fit into existing mcontext_t.
On i386 and amd64 do return the extended FPU states using
getcontextx(3). For other architectures, getcontextx(3) returns the
same information as getcontext(2).
Tested by: pho
MFC after: 1 month
The wtmpcvt(1) utility converts wtmp files to the new format used by
utmpx(3). Now that HEAD has been branched to stable/9 and 9.0 is
released, there is no need for it in HEAD.
MFC after: never
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
lib/libc/gen/strtofflags.c became const, but gcc did not warn about
assigning its members to non-const pointers. Clang warned about this
with:
lib/libc/gen/strtofflags.c:98:12: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types]
for (sp = mapping[i].invert ? mapping[i].name :
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed by: jilles
Add an API for alerting internal libc routines to the presence of
"unsafe" paths post-chroot, and use it in ftpd. [11:07]
Fix a buffer overflow in telnetd. [11:08]
Make pam_ssh ignore unpassphrased keys unless the "nullok" option is
specified. [11:09]
Add sanity checking of service names in pam_start. [11:10]
Approved by: so (cperciva)
Approved by: re (bz)
Security: FreeBSD-SA-11:06.bind
Security: FreeBSD-SA-11:07.chroot
Security: FreeBSD-SA-11:08.telnetd
Security: FreeBSD-SA-11:09.pam_ssh
Security: FreeBSD-SA-11:10.pam
vs. the comment documented "If we are working with a privileged socket,
then take only one attempt". Make the code match.
Furthermore, critical privileged applications that [over] log a vast amount
can look like a DoS to this code. Given it's unlikely the single reattempted
send() will succeeded, avoid usurping the scheduler in a library API for a
single non-critical facility in critical applications.
Obtained from: Juniper Networks
Discussed with: glebius
than silently failing and returning success.
Without this, code calls pthread_once(), receives a return value of
success, and thinks that the passed function has been called.
Approved by: dim (mentor)
load of _l suffixed versions of various standard library functions that use
the global locale, making them take an explicit locale parameter. Also
adds support for per-thread locales. This work was funded by the FreeBSD
Foundation.
Please test any code you have that uses the C standard locale functions!
Reviewed by: das (gdtoa changes)
Approved by: dim (mentor)
change here is to ensure that when a process forks after arc4random
is seeded, the parent and child don't observe the same random sequence.
OpenBSD's fix introduces some additional overhead in the form of a
getpid() call. This could be improved upon, e.g., by setting a flag
in fork(), if it proves to be a problem.
This was discussed with secteam (simon, csjp, rwatson) in 2008, shortly
prior to my going out of town and forgetting all about it. The conclusion
was that the problem with forks is worrisome, but it doesn't appear to
have introduced an actual vulnerability for any known programs.
The only significant remaining difference between our arc4random and
OpenBSD's is in how we seed the generator in arc4_stir().
OpenBSD's version (r1.22). While some of our style changes were
indeed small improvements, being able to easily track functionality
changes in OpenBSD seems more useful.
Also fix style bugs in the FreeBSD-specific parts of this file.
No functional changes, as verified with md5.
When booting the system, truncate the utx.active file, but do write the
BOOT_TIME record into it afterwards. This allows one to obtain the boot
time of the system as follows:
struct utmpx u1 = { .ut_type = BOOT_TIME }, *u2;
setutxent();
u2 = getutxid(&u1);
Now, the boot time is stored in u2->ut_tv, just like on Linux and other
systems.
We don't open the utx.active file with O_EXLOCK. It's rather unlikely
that other applications use this database at the same time and I want to
prevent the possibility of deadlocks in init(8).
Discussed with: pluknet
working MI one. The MI one only needs to be overridden on machines
with non-IEEE754 arithmetic. (The last supported one was the VAX.)
It can also be overridden if someone comes up with a faster one that
actually passes the regression tests -- but this is harder than it sounds.
Even though POSIX allows us to return simply /dev/tty as a pathname
identifying the controlling terminal of the running process, it is nicer
if this function were actually useful, by returning the actual pathname
of the controlling terminal.
Implement ctermid() by using the kern.devname sysctl to resolve the
actual name of /dev/tty. Don't use devname(3), since it may return bogus
strings like #C:0x123.
As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.
Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):
"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."
This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.
Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).
Formerly, in this case an error was returned but the pid was also returned
to the application, requiring the application to use unspecified behaviour
(the returned pid in error situations) to avoid zombies.
Now, reap the zombie and do not return the pid.
MFC after: 2 weeks
As noted in Austin Group issue #370 (an interpretation has been issued),
failing posix_spawn() because an fd specified with
posix_spawn_file_actions_addclose() is not open is unnecessarily harsh, and
there are existing implementations that do not fail posix_spawn() for this
reason.
Reviewed by: ed
MFC after: 10 days
Of course, strerror_r() may still fail with ERANGE.
Although the POSIX specification said this could fail with EINVAL and
doing this likely indicates invalid use of errno, most other
implementations permitted it, various POSIX testsuites require it to
work (matching the older sys_errlist array) and apparently some
applications depend on it.
PR: standards/151316
MFC after: 1 week
The "FTS_NOSTAT" option can avoid a lot of calls to stat(2) if it knows that a
directory could not possibly have subdirectories. This is decided by looking at
the link count: a subdirectory would increment its parent's link count by
virtue of its own ".." entry. This assumption only holds for UFS-like
filesystems that implement links and directories this way, so we must punt for
others.
It looks like ZFS is a UFS-like file system, as the above also holds for ZFS.
Add ZFS to the list of file systems that allow for such optimization.
MFC after: 1 month
Most of the ports I broke when I imported utmpx, were simple management
utilities for the utmp database, allowing you to add/remove entries
manually.
Add a small tool called utxrm(8), which allows you to remove an entry
from the utmpx database by hand. This is useful when a login daemon
crashes or fails to remove the entry during shutdown.
This matches the constants from <signal.h> with 'SIG' removed, which POSIX
requires kill and trap to accept and 'kill -l' to write.
'kill -l', 'trap', 'trap -l' output is now upper case.
In Turkish locales, signal names with an upper case 'I' are now accepted,
while signal names with a lower case 'i' are no longer accepted, and the
output of 'killall -l' now contains proper capital 'I' without dot instead
of a dotted capital 'I'.
I've noticed various terminal emulators that need to obtain a sane
default termios structure use very complex `hacks'. Even though POSIX
doesn't provide any functionality for this, extend our termios API with
cfmakesane(3), which is similar to the commonly supported cfmakeraw(3),
except that it fills the termios structure with sane defaults.
Change all code in our base system to use this function, instead of
depending on <sys/ttydefaults.h> to provide TTYDEF_*.
Instead of only returning NULL when the entry is invalid and can't be
matched against the current database, also return it when it cannot open
the log files properly.
for them, two functions _pthread_cancel_enter and _pthread_cancel_leave
are added to let thread enter and leave a cancellation point, it also
makes it possible that other functions can be cancellation points in
libraries without having to be rewritten in libthr.
their implementations aren't in the same files. Introduce LIBC_ARCH
and use that in preference to MACHINE_CPUARCH. Tested by amd64 and
powerpc64 builds (thanks nathanw@)
atexit and __cxa_atexit handlers that are either installed by unloaded
dso, or points to the functions provided by the dso.
Use _rtld_addr_phdr to locate segment information from the address of
private variable belonging to the dso, supplied by crtstuff.c. Provide
utility function __elf_phdr_match_addr to do the match of address against
dso executable segment.
Call back into libthr from __cxa_finalize using weak
__pthread_cxa_finalize symbol to remove any atfork handler which
function points into unloaded object.
The rtld needs private __pthread_cxa_finalize symbol to not require
resolution of the weak undefined symbol at initialization time. This
cannot work, since rtld is relocated before sym_zero is set up.
Idea by: kan
Reviewed by: kan (previous version)
MFC after: 3 weeks
number of host CPUs and osreldate.
This eliminates the last sysctl(2) calls from the dynamically linked image
startup.
No objections from: kan
Tested by: marius (sparc64)
MFC after: 1 month
quirks for weak-symbol handling. Text symbols require also marking weak
the special dot-symbol associated with the function, and data symbols
require that you not do that. To fix this, provide a hacked
__weak_reference for powerpc64, and define a new __weak_reference_data
for the single weak data symbol in base.
Revert after: binutils 2.17 import
Obtained from: projects/ppc64
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
this type conversion is the high bits which were used to indicate if a
special character was a literal or special were dropped. As a result, all
special character were treated as special, even if they were supposed to
be literals.
Reviewed by: gad@
Approved by: mentor (wes@)
sigvec(2) references have been updated to sigaction(2), sigsetmask(2) and
sigblock(2) to sigprocmask(2), sigpause(2) to sigsuspend(2).
Some legacy man pages still refer to them, that is OK.
Also add xrefs for confstr(3) (as sysconf(3) but for strings) and kvm(3)
(which is a more convenient way to access some of the variables).
PR: 116480
MFC after: 1 week
POSIX permits but does not require checking access on the current and parent
directories.
Because various programs do not like it if getcwd(3) fails, it seems best
to avoid checking access as much as possible. There are various reports in
GNATS about this (search for getcwd).
Our getcwd(3) implementation first queries the kernel for the pathname
directly, which does not check any permissions but sometimes fails, and then
falls back to reading all parent directories for the names.
PR: standards/44425
MFC after: 2 weeks
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
Be explicit and use the general bracketing form plus symbols which are
to be interpreted mathematically in this case.
Complaint by: mdocml
Reviewed by: ru
Approved by: philip, ed (mentors)
