Without the patch, there is a race condition: when poll() is invoked(),
if kvp_globals.daemon_busy is false, the daemon won't be timely
woke up, because hv_kvp_send_msg_to_daemon() can't wake up the daemon
in this case.
Submitted by: Dexuan Cui <decui@microsoft.com>
Sponsored by: Microsoft OSTC
Reviewed by: delphij, royger
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D4258
Current code doesn't try to make use of the full page when bouncing because
the size is only expanded to be a multiple of the alignment. Instead try to
always create segments of PAGE_SIZE when using bounce pages.
This allows us to remove the specific casing done for
BUS_DMA_KEEP_PG_OFFSET, since the requirement is to make sure the offsets
into contiguous segments are aligned, and now this is done by default.
Sponsored by: Citrix Systems R&D
Reviewed by: hps, kib
Differential revision: https://reviews.freebsd.org/D4119
panics when unloading the dummynet and IPFW modules:
- The callout drain function can sleep and should not be called having
a non-sleepable lock locked. Remove locks around "ipfw_dyn_uninit(0)".
- Add a new "dn_gone" variable to prevent asynchronous restart of
dummynet callouts when unloading the dummynet kernel module.
- Call "dn_reschedule()" locked so that "dn_gone" can be set and
checked atomically with regard to starting a new callout.
Reviewed by: hiren
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3855
This is a holdover from how reset is handled in the ARGE_MDIO world.
You need to define the mdio bus device if you want to use the ethernet
device or the arge setup path doesn't bring the MAC out of reset.
The new flag, -c <period>, sets the interrupt coalescing period in
microseconds through the new ioat(4) API ioat_set_interrupt_coalesce().
Also add a -z flag to zero ioat statistics before tests, to make it easy
to measure results.
Sponsored by: EMC / Isilon Storage Division
In I/OAT, this is done through the INTRDELAY register. On supported
platforms, this register can coalesce interrupts in a set period to
avoid excessive interrupt load for small descriptor workflows. The
period is configurable anywhere from 1 microsecond to 16.38
milliseconds, in microsecond granularity.
Sponsored by: EMC / Isilon Storage Division
directly into a loader (and thus kernel) env var, using the syntax
ubenv import ldvarname=ubvarname
Without the varname= prefix it uses the historical behavior of importing
to the name uboot.ubvarname.
Tested with RTL8188EU and RTL8188CUS in STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4523
Certain interfaces (e.g. pfsync0) do not have ip6 addresses (in other words,
ifp->if_afdata[AF_INET6] is NULL). Ensure we don't panic when the MTU is
updated.
pfsync interfaces will never have ip6 support, because it's explicitly disabled
in in6_domifattach().
PR: 205194
Reviewed by: melifaro, hrs
Differential Revision: https://reviews.freebsd.org/D4522
sys/dev/mpr/mpr_sas_lsi.c
sys/dev/mps/mps_sas_lsi.c
When mp[rs]sas_get_sata_identify returns
MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR, don't bother retrying. Protocol
errors aren't likely to be fixed by sleeping.
Without this change, a system that generated may protocol errors due
to signal integrity issues was taking more than an hour to boot, due
to all the retries.
Reviewed by: slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4553
* Use the interrupt-map property to route interrupts
* Remove the IRQ rman, it's now unneeded
* Support MSI/MSI-X interrupts
With this I'm able to use the two NICs I've tested (em and msk), however
while I can boot with an AHCI devie attached it fails when any drives are
connected.
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Currently, in case when npkts >= 2, RSSI and Rx radiotap fields
will be overridden by the next packet. As a result, every packet
from this chain will use the same RSSI / radiotap data.
After this change, RSSI and radiotap structure will be filled
for every frame right before ieee80211_input() call.
Tested with RTL8188EU / RTL8188CUS, STA and MONITOR modes.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4487
absolute position. This seems to be correlated with only removing a single
finger. To work around this report no movement on from the first packet
when the user exits scrolling.
the kernel. These registers are all callee saved, and as such will be
restored before returning to the exception handler.
Userland still needs these registers to be restored as they may be changed
by the kernel and we don't currently track these places.
An implementation from rum(4) was used (it looks simpler for me).
Will be used for h/w encryption support.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4447
- Add IEEE80211_GET_SLOTTIME(ic) macro.
- Use predefined macroses to set slot time.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4044
Before r291643, adding new interface prefix had the following logic:
try_add:
EEXIST && (PINNED) {
try_del(w/o PINNED flag)
if (OK)
try_add(PINNED)
}
In r291643, deletion was performed w/ PINNED flag held which leaded
to new interface prefixes (like ::1) overriding older ones.
Fix this by requesting deletion w/o RTF_PINNED.
PR: kern/205285
Submitted by: Fabian Keil <fk at fabiankeil.de>
Strictly speaking, missing devinfo is error which can be caused
by instantiating child using device_add_child() instead of
BUS_ADD_CHILD(). However, we can tolerate it.
Approved by: kib (mentor)
By using this functions, we can parse a list of tuples, each of them holds
xref and variable number of values.
This kind of list is used in DT for clocks, gpios, resets ...
Discussed with: ian, nwhitehorn
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D4316
LLE structure is mostly unchanged during its lifecycle: there are only 2
things relevant for fast path lookup code:
1) link-level address change. Since r286722, these updates are performed
under AFDATA WLOCK.
2) Some sort of feedback indicating that this particular entry is used so
we send NS to perform reachability verification instead of expiring entry.
The only signal that is needed from fast path is something like binary
yes/no.
The latter is solved by the following changes:
Special r_skip_req (introduced in D3688) value is used for fast path feedback.
It is read lockless by fast path, but updated under req_mutex mutex. If this
field is non-zero, then fast path will acquire lock and set it back to 0.
After transitioning to STALE state, callout timer is armed to run each
V_nd6_delay seconds to make sure that if packet was transmitted at the start
of given interval, we would be able to switch to PROBE state in V_nd6_delay
seconds as user expects.
(in STALE state) timer is rescheduled until original V_nd6_gctimer expires
keeping lle in STALE state (remaining timer value stored in lle_remtime).
(in STALE state) timer is rescheduled if packet was transmitted less that
V_nd6_delay seconds ago to make sure we transition to PROBE state exactly
after V_n6_delay seconds.
As a result, all packets towards lle in REACHABLE/STALE/PROBE states are handled
by fast path without acquiring lle read lock.
Differential Revision: https://reviews.freebsd.org/D3780
requests which page alignment + size is greater than MAXPHYS. Right
now md(4) over vnode would use the physical buffer of the size MAXPHYS
to map a data of size MAXPHYS + page offset of the user buffer. This
typically corrupts next pbuf, or, if the pbuf used was the last pbuf
in the map, the next page after the pbuf's map.
Split request up to the size of io which fits into pbuf KVA with
alignment, and retry if a part of the bio is left unprocessed.
Reported by: Fabian Keil <fk@fabiankeil.de>
Tested by: Fabian Keil, pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
A panicking thread always executes with a critical section held, so any
attempt to allocate or free memory while dumping will otherwise cause a
second panic. This can occur, for example, if xpt_polled_action() completes
non-dump I/O that was pending at the time of the panic. The fact that this
can occur is itself a bug, but asserting in this case does little but
reduce the reliability of kernel dumps.
Suggested by: kib
Reported by: pho
http://www.t-es-t.hu/download/mips/md00090c.pdf this is bit 3 of the
config0 word, not bit 2. This should fix virtually indexed caches
(relatively new in the MIPS world, so no current platforms used this
and current code just uses it as an optimization). It was causing
false positives on newer platforms that default to large values for
the kseg0 cache coherency attribute.
Submitted by: Stanislav Galabov
PR: 205249
It is a part of MCDI rework to share more code among NIC families.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D4481
