while the main process sends control message to the worker process, but worker
process hasn't started control thread yet, because it waits for reply from the
main process.
The fix is to start the control thread before sending any events.
Reported and fix suggested by: Mikolaj Golub <to.my.trociny@gmail.com>
MFC after: 3 days
to growing the filesystem.
Refuse to attach providers where the metadata provider size is
wrong. This makes post-boot attaches behave consistently with
pre-boot attaches. Also refuse to restore metadata to a provider
of the wrong size without the new -f switch. The new -f switch
forces the metadata restoration despite the provider size, and
updates the provider size in the restored metadata to the correct
value.
Helped by: pjd
Reviewed by: pjd
Casting from (char *) to (struct ufs1_dinode *) changes the
alignment requirement of the pointer and GCC does not know that
the pointer is adequately aligned (due to malloc(3)), and warns
about it. Cast to (void *) first to by-pass the check.
into un-zeroed storage.
The original patch was questioned by Kirk as it forces the filesystem
to do excessive work initialising inodes on first use, and was never
MFC'd. This change mimics the newfs(8) approach of zeroing two
blocks of inodes for each new cylinder group.
Reviewed by: mckusick
MFC after: 3 weeks
allow the option to be specified multiple times. This will help to
implement things like passing multiple keyfiles to geli(8) instead of
cat(1)ing them all into stdin and reading from there using one '-k -'
option.
understand everything correctly, we don't really need it.
- Provide default numeric value as strings. This allows to simplify
a lot of code.
- Bump version number.
upper layer. Until now, unionfs prevents to use that kind of
file system as upper layer. This time, I changed to allow
that kind of file system as upper layer. By this change, you
can use whiteout not supporting file system (e.g., especially
for tmpfs) as upper layer. It's very useful for combination of
tmpfs as upper layer and read only file system as lower layer.
By difinition, without whiteout support from the file system
backing the upper layer, there is no way that delete and rename
operations on lower layer objects can be done. EOPNOTSUPP is
returned for this kind of operations as generated by VOP_WHITEOUT()
along with any others which would make modifica tions to the
lower layer, such as chmod(1).
This change is suggested by ed.
Submitted by: ed
limited to async-signal safe functions in the child process), move all hooks
execution to the main (non-threaded) process.
Do it by maintaining connection (socketpair) between child and parent
and sending events from the child to parent, so it can execute the hook.
This is step in right direction for others reasons too. For example there is
one less problem to drop privs in worker processes.
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
This fixes various races and eliminates use of pthread* API in signal handler.
Pointed out by: kib
With help from: jilles
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
function to make code more readable.
- Be sure not to reconnect too often in case of signal delivery, etc.
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
process, once it start to use hooks.
- Add hook_check_one() in case the caller expects different child processes
and once it can recognize it, it will pass pid and status to hook_check_one().
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
- ad0 was referred to as da0
- wrong parameter -s instead of -a in example
- use double quotes consistently
PR: docs/150082
Submitted by: N.J. Mann <njm@njm.me.uk>
MFC after: 2 weeks
- Keep all hooks we're running in a global list, so we can report when
they finish and also report when they are running for too long.
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
node failures quickly for HAST resources that are rarely modified.
Remove XXX from a comment now that the guard thread never sleeps infinitely.
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
not available. This improves error reporting when bsdlabel(8) is unable
to open a device for writing. If GEOM_BSD was unavailable, only a rather
obscure error message "Class not found" was printed.
PR: bin/58390
Reviewed by: ae
Discussed with: marcel
MFC after: 1 month
- Increase target limit from 4 to 64; this limit will be removed entirely
at a later time.
- Improve recovery from lost network connections.
- Fix some potential deadlocks and a serious memory leak.
- Fix incorrect use of MH_ALIGN (instead of M_ALIGN), which makes no
practical difference, but triggers a KASSERT with INVARIANTS.
- Fix some warnings in iscontrol(8) and improve the man page somewhat.
Submitted by: Daniel Braniss <danny@cs.huji.ac.il>
Sponsored by: Dansk Scanning A/S, Data Robotics Inc.
use a different interface type (IFT_L2VLAN vs IFT_ETHER). Treat IFT_L2VLAN
interfaces like IFT_ETHER interfaces when handling link layer addresses.
Reviewed by: syrinx (bsnmpd)
MFC after: 1 week
- Load added resources.
- Stop and forget removed resources.
- Update modified resources in least intrusive way, ie. don't touch
/dev/hast/<name> unless path to local component or provider name were
modified.
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 1 month
- Don't exit on errors if not requested.
- Don't keep configuration in global variable, but allocate memory for
configuration.
- Call yyrestart() before yyparse() so that on error in configuration file
we will start from the begining next time and not from the place we left of.
MFC after: 1 month
PJDLOG_ASSERT() and PJDLOG_VERIFY() that will check the given condition
and log the problem where appropriate. The difference between those
two is that PJDLOG_VERIFY() always work and PJDLOG_ASSERT() can be
turned off by defining NDEBUG.
MFC after: 1 month
thus don't depend on one_pass flag anymore.
This is a POLA violation, but it is quite difficult to restore
the old behavior with new code. Also, the new behavior matches
behavior of the older "tee" action, and this is more intuitive.
-S option is meant to be "inclusive".
The original issue of the PR was already fixed.
PR: docs/142418
Submitted by: David Naylor (naylor dot b dot david at gmail dot com)
No objection from: kib
MFC after: 5 days
of add verb. Mention about maximum size limit for "freebsd-boot"
partition. It should be smaller than 545 KB (hardcoded in pmbr).
Show usage of SI unit suffixes in example.
Approved by: mav (mentor)
MFC after: 1 week
it to configure the interface. When the script is complete, dhclient
monitors the routing socket and will terminate if its address is
deleted or if its interface is removed or brought down.
Because the routing socket is already open when dhclient-script is
run, dhclient ignores address deletions for 10 seconds after the
script was run.
If the address that will be obtained is already configured on the
interface before dhclient starts, and if dhclient-script takes more
than 10 seconds (perhaps due to dhclient-*-hooks latencies), on script
completion, dhclient will immediately and silently exit when it sees
the RTM_DELADDR routing message resulting from the script reassigning
the address to the interface.
This change logs dhclient's reason for exiting and also changes the
10 second timeout to be effective from completion of dhclient-script
rather than from when it was started.
We now ignore RTM_DELADDR and RTM_NEWADDR messages when the message
contains no interface address (which should not happen) rather than
exiting.
Not reviewed by: brooks (timeout)
MFC after: 3 weeks
directory truncation to proceed before the link has been cleared. This
is accomplished by detecting a directory with no . or .. links and
clearing the named directory entry in the parent.
- Add a new function ino_remref() which handles the details of removing
a reference to an inode as a result of a lost directory. There were
some minor errors in various subcases of this routine.
int.
- Use errx(3) instead of err(3) to print the error message on short
reads in readlabel(). errno won't be set on short reads which can
easily occur here due to the fixed size read request.
PR: 144307
Reviewed by: bde
need. Close the pidfile. Then close all descriptors >= 3 to avoid
information leakage to children.
This solves the problem of not being able to restart devd when you
have, for example, a dhclient forked to configure your network...
MFC after: 3 days
- Use err/errx only when the case is really fatal. For other
cases, fall back to full fsck instead of quiting fsck.
- Plug a memory leak.
- Avoid divide by zero when printing summary.
- Output "FILE SYSTEM IS MARKED CLEAN" when a successful
journal recovering is done.
- When -f is specified, do full fsck instead of journal recovery.
Move code that converts params from humanized numbers to sectors count
to subr.c and adjust comment.
Add post-processing for "size" and "start offset" params in gpart,
now they are properly converted to sectors count with known sector size
that can be greater that 512 bytes.
Also replace "unsigned long long" type to "off_t" for unify code since
it used for medium size in libgeom(3) and DIOCGMEDIASIZE ioctl.
PR: bin/146277
Reviewed by: marcel (previous version)
Approved by: kib (mentor)
MFC after: 1 month
- remove stray argument [1]
- remove stray whitespace
- use canonical wording for the HISTORY section
PR: docs/147119 [1]
Submitted by: Alexander Best <alexbestms@wwu.de> [1]
MFC after: 1 week
we grow more descriptors, but I'll reconsider readding them once we get there.
Passing (a = b) expression to FD_ISSET() is bad idea, as FD_ISSET() evaluates
its argument twice.
Found by: Coverity Prevent
CID: 5243
MFC after: 3 days
- Add information regarding VTOC8 bootrstrap code and how it's handled with
r208777 in place.
- Document the mapping of partition types to VTOC8 tags.
- Add examples for VTOC8 to the respective section.
- Eliminated hard sentence breaks.
Reviewed by: marcel (slightly buggy version)
MFC after: 3 days
file to be of maximum size.
- Add special handling required for SMI/VTOC8 disklabel partcode, i.e. avoid
overwriting the label when writing the bootstrap code to the partition
starting at 0 and install it to all partitions when the -i option is omitted
just like geom_sunlabel(4) and sunlabel(8) do by default.
- Add missing prototypes.
- Add const where applicable.
Reviewed by: marcel
MFC after: 3 days
mount(8): add xref to devfs(5)
devfs(5): change example to something more likely to be useful (it is not
necessary to mount a devfs on /dev manually, but for chroots/jails it is
often needed), mention since when devfs is preferred to device nodes on ufs
PR: 146600
MFC after: 2 weeks
Reported by: Mikolaj Golub <to.my.trociny@gmail.com>
- Only require 256k of blocks per-cg when trying to allocate contiguous
journal blocks. The storage may not actually be contiguous but is at
least within one cg.
- When disabling SUJ leave SU enabled and report this to the user. It
is expected that users will upgrade SU filesystems to SUJ and want
a similar downgrade path.
