If we pass an anchor name which doesn't exist pfr_table_count() returns
-1, which leads to an overflow in mallocarray() and thus a panic.
Explicitly check that pfr_table_count() does not return an error.
Reported-by: syzbot+bd09d55d897d63d5f4f4@syzkaller.appspotmail.com
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24539
r360292 introduced the wrong order, resulting in returned
nhops not being referenced, despite the fact that references
were requested. That lead to random GPF after using SCTP sockets.
Special defined macro like IPV[46]_SCOPE_GLOBAL will be introduced
soon to reduce the chance of putting arguments in wrong order.
Reported-by: syzbot+5c813c01096363174684@syzkaller.appspotmail.com
Release kernels have no KDB backends enabled, so they discard an NMI
if it is not due to a hardware failure. This includes NMIs from
IPMI BMCs and hypervisors.
Furthermore, the interaction of panic_on_nmi, kdb_on_nmi, and
debugger_on_panic is confusing.
Respond to all NMIs according to panic_on_nmi and debugger_on_panic.
Remove kdb_on_nmi. Expand the meaning of panic_on_nmi by making
it a bitfield. There are currently two bits: one for NMIs due to
hardware failure, and one for all others. Leave room for more.
If panic_on_nmi and debugger_on_panic are both true, don't actually panic,
but directly enter the debugger, to allow someone to leave the debugger
and [hopefully] resume normal execution.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes: machdep.kdb_on_nmi is gone; machdep.panic_on_nmi changed
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24558
Store the attached regulator in a tailq to later find them in ofw_map.
While here, do not attempt to attach a regulator without a name, a node
might exists but if it doesn't have a name the regulator is unused.
MFC after: 1 month
If pin is switched from fixed function to GPIO, it should have prepared
direction, pull-up/down and default value before function gets switched.
Otherwise we may produce unwanted glitch on output pin.
Right order of drive strength settings is questionable, but I think that
is slightly safer to do it also before function switch.
This fixes serial port corruption observed after DT 5.6 import.
MFC after: 1 week
This change is build on top of nexthop objects introduced in r359823.
Nexthops are separate datastructures, containing all necessary information
to perform packet forwarding such as gateway interface and mtu. Nexthops
are shared among the routes, providing more pre-computed cache-efficient
data while requiring less memory. Splitting the LPM code and the attached
data solves multiple long-standing problems in the routing layer,
drastically reduces the coupling with outher parts of the stack and allows
to transparently introduce faster lookup algorithms.
Route caching was (re)introduced to minimise (slow) routing lookups, allowing
for notably better performance for large TCP senders. Caching works by
acquiring rtentry reference, which is protected by per-rtentry mutex.
If the routing table is changed (checked by comparing the rtable generation id)
or link goes down, cache record gets withdrawn.
Nexthops have the same reference counting interface, backed by refcount(9).
This change merely replaces rtentry with the actual forwarding nextop as a
cached object, which is mostly mechanical. Other moving parts like cache
cleanup on rtable change remains the same.
Differential Revision: https://reviews.freebsd.org/D24340
The macros CAST_USER_ADDR_T() and CAST_DOWN() were used for the Mac OS/X
port. The first of these macros was a no-op for FreeBSD and the second
is no longer used.
This patch gets rid of them. It also deletes the "mbuf_t" typedef which
is no longer used in the FreeBSD code from nfskpiport.h
This patch should not change semantics.
IEEE80211_MESH_RTCMD_ADD was invoking memcmp() to validate the
supplied address directly on the user pointer rather than first doing
a copyin() and validating the copied value.
IEEE80211_MESH_RTCMD_DELETE was passing the user pointer directly to
ieee80211_mesh_rt_del() rather than copying the user buffer into a
temporary kernel buffer.
Reviewed by: brooks, kib
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24562
pmap_emulate_modify() was assuming that no changes to the pmap could
take place between the TLB signaling the fault and
pmap_emulate_modify()'s acquisition of the pmap lock, but that's clearly
not even true in the uniprocessor case, nevermind the SMP case.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24523
MipsDoTLBMiss() will load a segmap entry or pde, check that it isn't
zero, and then chase that pointer to a physical page. If that page has
been freed in the interim, it will read garbage and go on to populate
the TLB with it.
This can happen because pmap_unwire_ptp zeros out the pde and
vm_page_free_zero()s the ptp (or, recursively, zeros out the segmap
entry and vm_page_free_zero()s the pdp) without interlocking against
MipsDoTLBMiss(). The pmap is locked, and pvh_global_lock may or may not
be held, but this is not enough. Solve this issue by inserting TLB
shootdowns within _pmap_unwire_ptp(); as MipsDoTLBMiss() runs with IRQs
deferred, the IPIs involved in TLB shootdown are sufficient to ensure
that MipsDoTLBMiss() sees either a zero segmap entry / pde or a non-zero
entry and the pointed-to page still not freed.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24491
For such mappings we need to dump 512 page table pages, not one, and
they need to be included in the pmap size recorded in the minidump
header.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
The comment referenced a non-existent function, and these minidump
implementations already buffer discontiguous physical data pages by
mapping them into a single VA range that gets passed to the dump device,
so there is no real advantage in batching calls to blk_write().
The RISC-V and MIPS minidump implementations still write a page at a
time and so would benefit from some form of batching.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
Kernel prints the device announcement before the attach method is
called, so if the correct description is not set by the probe method,
then the announcement would have an incorrect one.
MFC after: 1 week
Use DRIVER_MODULE_ORDERED(SI_ORDER_ANY) so that ig4's ACPI attachment
happens after iicbus and acpi_iicbus drivers are registered.
I have seen a problem where iicbus attached under ig4 instead of
acpi_iicbus when ig4.ko was loaded with kldload. I believe that that
happened because ig4 driver was a first driver to register, it attached
and created an iicbus child. Then iicbus driver was registered and,
since it was the only driver that could attach to the iicbus child
device, it did exactly that. After that acpi_iicbus driver was
registered. It would be able to attach to the iicbus device, but it was
already attached, so nothing happened.
MFC after: 2 weeks
The TSADC familiy is a little bit more complex than V2 and V3.
Early revision do not use syscon and do not use qsel (RK3288).
Next revision still do not use syscon but uses qsel (RK3328).
Final revision use both.
Submitted by: peterj
MFC after: 1 month
In r360131, acpi_ec probe was changed to not clobber an error status prior to
several error cases that did not explicitly set the error variable before
goto'ing the exit path. However, I did not notice that the error variable was
not set to success in the success path. That caused all successful probes to
fail, which is obviously undesirable.
PR: 245778
Reported by: Neel Chauhan <neel AT neelc.org>, Evilham <contact AT evilham.com>
Tested by: Evilham
X-MFC-With: r360131
One of the goals of the new routing KPI defined in r359823 is to entirely
hide`struct rtentry` from the consumers. It will allow to improve routing
subsystem internals and deliver more features much faster.
This commit is mostly mechanical change to eliminate direct struct rtentry
field accesses.
The only notable difference is AF_LINK gateway encoding.
AF_LINK gw is used in routing stack for operations with interface routes
and host loopback routes.
In the former case it indicates _some_ non-NULL gateway, as the interface
is the same as in rt_ifp in kernel and rtm_ifindex in rtsock reporting.
In the latter case the interface index inside gateway was used by the IPv6
datapath to verify address scope for link-local interfaces.
Kernel uses struct sockaddr_dl for this type of gateway. This structure
allows for specifying rich interface data, such as mac address and interface
name. However, this results in relatively large structure size - 52 bytes.
Routing stack fils in only 2 fields - sdl_index and sdl_type, which reside
in the first 8 bytes of the structure.
In the new KPI, struct nhop_object tries to be cache-efficient, hence
embodies gateway address inside the structure. In the AF_LINK case it
stores stortened version of the structure - struct sockaddr_dl_short,
which occupies 16 bytes. After D24340 changes, the data inside AF_LINK
gateway will not be used in the kernel at all, leaving rtsock as the only
potential concern.
The difference in rtsock reporting:
(old)
got message of size 240 on Thu Apr 16 03:12:13 2020
RTM_ADD: Add Route: len 240, pid: 0, seq 0, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 link#5 255.255.255.0
(new)
got message of size 200 on Sun Apr 19 09:46:32 2020
RTM_ADD: Add Route: len 200, pid: 0, seq 0, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 link#5 255.255.255.0
Note 40 bytes different (52-16 + alignment).
However, gateway is still a valid AF_LINK gateway with proper data filled in.
It is worth noting that these particular messages (interface routes) are mostly
ignored by routing daemons:
* bird/quagga/frr uses RTM_NEWADDR and ignores prefix route addition messages.
* quagga/frr ignores routes without gateway
More detailed overview on how rtsock messages are used by the
routing daemons to reconstruct the kernel view, can be found in D22974.
Differential Revision: https://reviews.freebsd.org/D24519
as the dma_device during RDMA registration.
cxgbe's struct device cannot be used as-is because it's a native FreeBSD
driver and ibcore is LinuxKPI based.
MFC after: 1 week
MFC after: r360196
Thanks to Natalie Silvanovich from Google for finding and reporting the
issue found by her in the SCTP userland stack.
MFC after: 3 days
X-MFC with: https://svnweb.freebsd.org/changeset/base/360193
RFC5661 specifies that a client's recovery upon receipt of NFSERR_BADSESSION
should first consist of a CreateSession operation using the extant ClientID.
If that fails, then a full recovery beginning with the ExchangeID operation
is to be done.
Without this patch, the FreeBSD client did not attempt the CreateSession
operation with the extant ClientID and went directly to a full recovery
beginning with ExchangeID. I have had this patch several years, but since
no extant NFSv4.n server required the CreateSession with extant ClientID,
I have never committed it.
I an committing it now, since I suspect some future NFSv4.n server will
require this and it should not negatively impact recovery for extant NFSv4.n
servers, since they should all return NFSERR_STATECLIENTID for this first
CreateSession.
The patched client has been tested for recovery against both the FreeBSD
and Linux NFSv4.n servers and no problems have been observed.
MFC after: 1 month
RFC 8221 does not outright ban 3des as the algorithms deprecated for
13 in r348205, but it is listed as a SHOULD NOT and will likely be a
MUST NOT by the time 13 ships.
Discussed with: bjk
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24341
Add driver for Broadcom "GENET" version 5, as found in BCM-2711 on
Raspberry Pi 4B. The driver is derived in part from the bcmgenet.c
driver in NetBSD, along with bcmgenetreg.h.
Reviewed by: manu
Obtained from: in part from NetBSD
Relnotes: yes, note addition
Differential Revision: https://reviews.freebsd.org/D24436
Allocate a temporary buffer in the kernel to serve as the CCB data
pointer for a pass-through transaction and use copyin/copyout to
shuffle the data to/from the user buffer.
Reviewed by: scottl, brooks
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24489
The handle_string callback for the ENCIOC_SETSTRING ioctl was passing
a user pointer to memcpy(). Fix by using copyin() instead.
For ENCIOC_GETSTRING ioctls, the handler was storing the user pointer
in a CCB's data_ptr field where it was indirected by other code. Fix
this by allocating a temporary buffer (which ENCIOC_SETSTRING already
did) and copying the result out to the user buffer after the CCB has
been processed.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24487
These two sysctls were added to support UFS softupdates journalling
with snapshots. However, the changes to fsck to use them were never
committed and there have never been any in-tree uses of these sysctls.
More details from Kirk:
When journalling got added to soft updates, its journal rollback freed
blocks that it thought were no longer in use. But it does not take
snapshots into account (i.e., if a snapshot is still using it, then it
cannot be freed). So I added the needed logic to fsck by having the
free go through the kernel's blkfree code so it could grab blocks that
were still needed by snapshots. That is done using the setbufoutput
hack. I never got that code working reliably, so it is still sitting
in my work directory. Which also explains why you still cannot take
snapshots on filesystems running with journalling...
In looking over my use of this feature, and in particular the troubles
I was having with it, I conclude that it may be better to extract the
code from the kernel that handles freeing blocks claimed by snapshots
and putting it into fsck directly. My original intent was that it is
complex and at the time changing, so only having to maintain it in one
place was appealing. But at this point it has not changed in years and
the hacks like setinode and setbufoutput to be able to use the kernel
code is sufficiently ugly, that I am leaning towards just extracting
it.
Reviewed by: mckusick
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24484
If DTRACE is enabled at compile time, all kernel breakpoint traps are
first given to dtrace to see if they are triggered by a FBT probe.
Previously if dtrace didn't recognize the trap, it was silently
ignored breaking the handling of other kernel breakpoint traps such as
the debug.kdb.enter sysctl. This only returns early from the trap
handler if dtrace recognizes the trap and handles it.
Submitted by: Nicolò Mazzucato <nicomazz97@gmail.com>
Reviewed by: markj
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D24478
blockcount_wait() still unconditionally waits for the count to reach
zero before returning.
Tested by: pho (a larger patch)
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24513
The current situation results in intermittent breakage if data gets split up
with the sign bit set on the data1 half of it, as PAIR32TO64 will then:
data1 | (data2 << 32) -> resulting in data1 getting sign-extended when it's
implicitly widened and clobbering the result. AFAICT, there's no compelling
reason for these to be signed.
This was most exposed by flakiness in the kqueue timer tests under compat32
after the ABSTIME test got switched over to using a better clock and
microseconds.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24518
