Administrators can enable it if required.
Reviewed by: bz, kevans
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37411
Several important base system components are written in C++, and the
WITHOUT_CXX option produced a system that was not fully functional.
Just accept this, and remove the option to build without C++ support.
This reverts commit adc3c128c6.
Reviewed by: brooks, kevans, jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33108
Belatedly remove the entries older than the stable/11 branch point after
stable/13 was created. This should be done shortly after the branch, not
well after the branch point.
Document this policy in UPDATING, though other checklists should likely
be updated as well.
Sponsored by: Netflix
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D37514
The notes on EFI booting and updating for ZFS had become dated and only
partially updated. Expand the notes with a few more details and a
pointer to laoder.efi(8) and uefi(8).
Sponsored by: Netflix
Discussed with: pauamma, karels
Differential Revision: https://reviews.freebsd.org/D36629
Add irq_get_msi_desc() as a wrapper around a PCI function which will
allocate a single cached value (see comment on struct) for the
msi_desc requested if it doesn't exist yet and handle freeing it
when the PCI device goes away. We take the values from the ivars of
the native (FreeBSD) device.
While changing struct pci_dev also add the msi_cap field requested by
a wireless driver.
Bump __FreeBSD_version so these changes can be detected.
MFC after: 3 days
X-MFC: move fields to end of struct (alloc happens in linux_pci.c)
Reviewed by: hselasky (earlier version)
Differential Revision: https://reviews.freebsd.org/D37523
Instead of providing no /usr/bin/objdump when LLVM_BINUTILS is false.
PR: 267854 [exp-run]
Reviewed by: dim
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37445
This reverts commit 68c3f03021. There are
some weird crashes when KVMs switch caused by this, so revert this
commit until they are sorted out.
Reported by: cy@
Sponsored by: Netflix
In the rare case that we succeed in probing, but fail to attach, flip
the default to be to disable the
device. hw.bus.disable_failed_devices=false is no required to restore
the old behavior. The old behavior dates form a time when dynamic
control of devices wasn't yet present (devctl didn't exist). Now that
one can retry probe/attach the device with devctl, the default doesn't
make sense: The more desirable behaivor is to have stable device numbers
when one has several instances of the same device in a system (common
for NICs or HBAs).
Reviewed by: jhb (verbal)
Sponsored by: Netflix
We removed the code for these modes back in 2015, but converted such
configurations to 'scrub fragment reassemble'. It's been long enough,
drop the backwards compatibility glue too.
Reviewed by: mjg
MFC after: never
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37460
We only support updates from major version N to N+1:
stable/13 was branched on 20210122, remove all old entries from stable/10
branch point in 2013 to 20210122.
A small reduction in build infrastructure complexity; when we had both
Clang and GCC in the tree it was useful to have both built, and choose
one or the other to install as /usr/bin/cc. Now only Clang is in the
tree, and there is no point in building and installing base Clang but
not providing it as cc (and c++, cpp).
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37075
Move pm_message_t from kernel.h to pm.h and remove a private define
in usb.h as well as adjust the implementation in linux_usb.c.
This cleans up what I believe to be a historic shortcut and is
needed for future wireless driver updates.
Leave a note in UPDATING that drm-kmod users need to update to the
latest version before re-compiling a new kernel to avoid errors
(see PR).
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
PR: 264449 (drm-kmod port update, thanks wulf)
Obtained from: bz_git_iwlwifi (Dec 2020) (partly)
Reviewed by: hselasky, imp
Differential Revision: https://reviews.freebsd.org/D35276
As of unbound 1.14.0rc1, as per RFC8375 unbound by default blocks
'home.arpa'. Document this new behaviour and how to unblock it.
Reported by: avg
Discussed with: glebius, avg
RFC: 8375, Section 6: Security Considerations
The introduction of <sched.h> improved compatibility with some 3rd
party software, but caused the configure scripts of some ports to
assume that they were run in a GLIBC compatible environment.
Parts of sched.h were made conditional on -D_WITH_CPU_SET_T being
added to ports, but there still were compatibility issues due to
invalid assumptions made in autoconfigure scripts.
The differences between the FreeBSD version of macros like CPU_AND,
CPU_OR, etc. and the GLIBC versions was in the number of arguments:
FreeBSD used a 2-address scheme (one source argument is also used as
the destination of the operation), while GLIBC uses a 3-adderess
scheme (2 source operands and a separately passed destination).
The GLIBC scheme provides a super-set of the functionality of the
FreeBSD macros, since it does not prevent passing the same variable
as source and destination arguments. In code that wanted to preserve
both source arguments, the FreeBSD macros required a temporary copy of
one of the source arguments.
This patch set allows to unconditionally provide functions and macros
expected by 3rd party software written for GLIBC based systems, but
breaks builds of externally maintained sources that use any of the
following macros: CPU_AND, CPU_ANDNOT, CPU_OR, CPU_XOR.
One contributed driver (contrib/ofed/libmlx5) has been patched to
support both the old and the new CPU_OR signatures. If this commit
is merged to -STABLE, the version test will have to be extended to
cover more ranges.
Ports that have added -D_WITH_CPU_SET_T to build on -CURRENT do
no longer require that option.
The FreeBSD version has been bumped to 1400046 to reflect this
incompatible change.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33451
A number of header files in sys/* have, going back to 7th Edition Unix
in 1979, reqiured other files (like sys/types.h) to compile. Likewise
the 4BSD networking code has had prerequisites. However, going back to
around the turn of the 21st century, other systems have made them be
independently include-able (wide-spread header include protection
post-dates 7th edition Unix by maybe 3 or so years judging from USENET
source postings). Start down the path of making them all independently
include-able by creating this test that fails buildworld when they are
not.
The file 'badfiles.inc' contains a list of the currently broken files
that cannot be included w/o any prerequisites. As files are fixed, 'make
badfiles.inc' should be re-run to remove them from the list. Note: All
files that start with an underscore are considered internal and not
tested.
Please note: once a file is removed from badfiles.inc, it must pass on
all architectures. Buildworld through at least the _includes target is
needed to ensure its working (though a buildkernel should also be done
on all architectures as well).
Sponsored by: Netflix
Reviewed by: brooks, markj
Differential Revision: https://reviews.freebsd.org/D32498
Due to the way that we configure llvm, there's a problem with NO_CLEAN
builds. The *.def files listed in the commit change their behavior based
on command line arguments. Since my flipping the default of the mips
target, this meant there were .o files that were now inconsistent with
how we'll now compile things, leading to errors. By touching the *.def
files list, one can workaround this problem.
Noticed by: jhb
Sponsored by: Netflix
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
This commit aligns the steps in UPDATING with the steps from the
handbook which already prefers etcupdate(8). While here also remove a
dubious comment.
PR: 252417
Reviewed by: ceri
Approved by: philip (mentor), imp
Differential Revision: https://reviews.freebsd.org/D28062
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
In the recent history sh(1) has gain the missing features for it to
become a usable interractive shell:
- command completion
- persistent history support
- improvements on the default bindings in emacs mode
- improvements in the vi mode (repect $EDITOR)
- print a newline when exiting via ^D
- default prompt and improvements on how PS1 can be configured
- and more.
This changes also simplifies making tiny freebsd images with only sh(1)
as a shell
Dummynet now no longer requires ipfw, so any users relying on this
dependency to load ipfw will need to explicitly load ipfw.
While here fix a typo in the date of the previous entry.
Sponsored by: Rubicon Communications, LLC ("Netgate")
