They are unused today and cannot be safely used in the face of unlocked
lookup, in which pages may be busied without the object lock held.
Obtained from: jeff (object_concurrency patches)
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32948
- Modify vm_page_busy_sleep() and vm_page_busy_sleep_unlocked() to take
a VM_ALLOC_* flag indicating whether to sleep on shared-busy, and fix
up callers.
- Modify vm_page_busy_sleep() to return a status indicating whether the
object lock was dropped, and fix up callers.
- Convert callers of vm_page_sleep_if_busy() to use vm_page_busy_sleep()
instead.
- Remove vm_page_sleep_if_(x)busy().
No functional change intended.
Obtained from: jeff (object_concurrency patches)
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32947
In 9fae47666 zfsd got a libspl dependency to avoid undefined references.
However that workaround did not help external consumers of libzfs_core.
Fix all missing dependencies lld 13 and the rtld complain about.
Reviewed by: freqlabs, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32521
This adds a new ng_device command, NGM_DEVICE_ETHERALIGN, which has no
associated args. After the command arrives, the device begins adjusting all
packets sent out its hook to have ETHER_ALIGN bytes of padding at the
beginning of the packet. The ETHER_ALIGN padding is added only when
running on an architecture that requires strict alignment of IP headers
(based on the __NO_STRICT_ALIGNMENT macro, which is only #define'd on
x86 as of this writing).
This also adds ascii <-> binary command translation to ng_device, both for
the existing NGM_DEVICE_GET_DEVNAME and the new ETHERALIGN command.
This also gives a name to every ng_device node when it is constructed, using
the cdev device name (ngd0, ngd1, etc). This makes it easier to address
command msgs to the device using ngctl(8).
Reviewed by: donner, ray, adrian
Differential Revision: https://reviews.freebsd.org/D32905
MFC after: 1 week
Drop packets arriving from the network that have our source IPv6
address. If maliciously crafted they can create evil effects
like an RST exchange between two of our listening TCP ports.
Such packets just can't be legitimate. Enable the tunable
by default. Long time due for a modern Internet host.
Reviewed by: melifaro, donner, kp
Differential revision: https://reviews.freebsd.org/D32915
Drop packets arriving from the network that have our source IP
address. If maliciously crafted they can create evil effects
like an RST exchange between two of our listening TCP ports.
Such packets just can't be legitimate. Enable the tunable
by default. Long time due for a modern Internet host.
Reviewed by: donner, melifaro
Differential revision: https://reviews.freebsd.org/D32914
This very questionable feature was enabled in FreeBSD for a very short
time. It was disabled very soon upon merging to RELENG_4 - 23d7f14119bf.
And in HEAD was also disabled pretty soon - 4bc37f9836fb1.
The tunable has very vague name. Check interface for what? Given that
it was never documented and almost never enabled, I think it is fine
to rename it together with documenting it.
Also, count packets dropped by this tunable as ips_badaddr, otherwise
they fall down to ips_cantforward counter, which is misleading, as
packet was not supposed to be forwarded, it was destined locally.
Reviewed by: donner, kp
Differential revision: https://reviews.freebsd.org/D32912
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
Recent firmwares have more leeway in FEC selection and there is a need
to track the FECs requested by the driver separately from the FEC in use
on the link. The existing dev.<port>.<inst>.fec sysctl can read both but
its behavior depends on the link state and it is sometimes hard to find
out what was requested when the link is up.
Split the fec sysctl into two (requested_fec and link_fec) to get access
to both pieces of information regardless of the link state.
MFC after: 1 week
Sponsored by: Chelsio Communications
Commit f0c9847a6c47 added the ioflag and cred arguments to
VOP_ALLOCATE() for NFSv4.2 server support. This patch updates
the man page for these arguments.
Reviewed by: khng, gbe
Differential Revision: https://reviews.freebsd.org/D32898
Mark functions inet_netof(), inet_lnaof(), and inet_makeaddr() as
deprecated, as they assume Class A/B/C. inet_makeaddr() mostly works
when networks are a multiple of 8 bits, but warn for anything other
than historical classes. Reduce other mentions of network classes.
MFC after: 1 month
Reviewed by: bcr, #manpages
Differential Revision: https://reviews.freebsd.org/D32711
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb (previous version)
Differential revision: https://reviews.freebsd.org/D32099
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D32099
You can wire da, ada and nda device units to serial numbers. sdda cannot
be wired like this because SD and MMC cards lack serial numbers (or at
the very least CAMMMC does not query or retain them).
Sponsored by: Netflix
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D32825
Unwired units start with the first avaialble unit that hasn't been
wired, not one greater than the largest wired unit. wired units are
skipped when assigning unwired units a number.
Sponsored by: Netflix
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D32824
Allow users to set a number on rules which will be exposed as part of
the pflog header.
The intent behind this is to allow users to correlate rules across
updates (remember that pf rules continue to exist and match existing
states, even if they're removed from the active ruleset) and pflog.
Obtained from: pfSense
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32750
I made a mistaking in merging the final commits for the devctl changes. This
adds the 'hushed' variable and has the correct dates for the manuals.
Pointy hat to: imp
Generate VT events when the bell beeps. When coupled with disabling the
bell,this allows custom bells to be rung when we'd otherwise beep.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D32656
In most cases blackholing for locally originated packets is undesired,
leads to different kind of lags and delays. Provide sysctls to enforce
it, e.g. for debugging purposes.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D32718
Pick up changes in option dependencies (WITHOUT_OPENSSL and WITHOUT_CXX)
and the addition of WITH_DETECT_TZ_CHANGES and WITH_LLVM_BINUTILS.
Sponsored by: The FreeBSD Foundation
OFED, OPENMP, and PMC depend on C++ support. Force them off when
building WITHOUT_CXX.
Reported by: Michael Dexter, Build Option Survey
Reviewed by: imp, jrtc27
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32730
The new iSCSI initiator iscsi(4) was introduced with FreeBSD 10.0, and
the old intiator was marked obsolete shortly thereafter (in commit
d32789d95cfbf, MFC'd to stable/10 in ba54910169c4). Remove it now.
Reviewed by: jhb, mav
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32673
From https://github.com/Yubico/libfido2:
libfido2 provides library functionality and command-line tools to
communicate with a FIDO device over USB, and to verify attestation
and assertion signatures.
libfido2 supports the FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2)
protocols.
libfido2 will be used by ssh to support FIDO/U2F keys. It is currently
intended only for use by ssh, and so is installed as a PRIVATELIB and is
placed in the ssh pkgbase package.
This is currently disabled for the 32-bit library build as libfido2 is
not compatible with the COMPAT_32BIT hack in usb_ioctl.h.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32448
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
This man page formerly referred to boot1.efi searching for loader.efi;
when boot1.efi was obsoleted in favour of having loader.efi launched
directly, this was left claiming that loader.efi searched for
loader.efi.
Reviewed by: bcran
Fixes: db8b56134506 Rework UEFI ESP generation
Differential Revision: https://reviews.freebsd.org/D32334
For $reason mobaxterm default on sending unusual sequence from home/del
key, which makes libedit unabel to catch them and bind them correctly.
mobaxterm seems popular on the windows environment, so add proper
keybinding to default shrc configuration so it works out of box.
Reported by: lme
Somehow we end up having 2 definition of the same .shrc in the source
tree, both of them should have been updated.
A batter fix would be to only keep one copy of the same file. but that
would be for another commit
Reported by: lme
Document the new allocator variants and flesh out the description of
some details of the page allocator interface.
Reviewed by: kib, alc
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32035
