I have been debugging the usb problems some more. Your were
right in your assumption (thanks for the pointer) about lack
of calls to bus_dmamap_sync(). In usbdi.c bus_dmamap_sync()
does get used for transfers that move data from PC to USB and
it is used for transfers that move data from USB to PC. But
someone forgot that control transfers consist of possibly two
data chunks : the request itself and optionally a buffer of
data that should be transfered to or from the USB device. On
requests to the control endpoint without additional data
bus_dmamap_sync() didn't get called. For some reason my first
tests with umass worked (due to enough cache poisening I
guess). The attached patch adds a call to bus_dmamap_sync()
to usbdi.c and now all devices I have tried work out of the
box. I have successfully transfered large files using the
if_axe driver and I have mounted several different umass
devices.
submitted by: Daan Vreeken
sponsored by: Vitsch Electronics
reviewed by: cognet@
marked INP_DROPPED or INP_TIMEWAIT:
o return ECONNRESET instead of EINVAL for close, disconnect, shutdown,
rcvd, rcvoob, and send operations
o return ECONNABORTED instead of EINVAL for accept
These changes should reduce confusion in applications since EINVAL is
normally interpreted to mean an invalid file descriptor. This change
does not conflict with POSIX or other standards I checked. The return
of EINVAL has always been possible but rare; it's become more common
with recent changes to the socket/inpcb handling and with finer-grained
locking and preemption.
Note: there are other instances of EINVAL for this state that were
left unchanged; they should be reviewed.
Reviewed by: rwatson, andre, ru
MFC after: 1 month
- Fix bug preventing adoption of running firmware
- Set PCIe max read request size to 4KB
- Read PCIe link width from config space
- Assume aligned completions from the southbridge ports
of intel E5000 chips
- Use aligned firmware when link width is x4 or less
- Add hw.mxge.force_firmware tunable to allow user to force
selection of aligned (or unaligned) firmware
o Don't delay when checking the done bits. There's no gain other
than a small performance hit.
o calculate the clock divisors better (things are still way slow,
so maybe there's more here?)
o don't always fail reset. Always succeed instead.
o fix inverted logic around at91_twi_wait() return value
o remove debug code
o remove unneeded, unworking junk
switch tsbscratch over to using order of number of pages as opposed to actual number of pages
switch tsb.c over to using wrappers for contig page allocation
way I intended due to licensing restrictions. I had intended
that it would be defaulted on, with opt-out possible for
companies that don't accept the CDDL. The FreeBSD GENERIC
kernel has to be entirely BSD licensed, so the only alternative
would have been to make KDTRACE an opt-in option. That isn't
a design I favour.
bfe_init_locked() wasn't sufficient to bring the chip back to life, it also
required a call to bfe_chip_reset() during resume.
Tested by: Stepan Zastupov +redchrom at gmail+
MFC after: 1 week
- Fix overflow bugs in sysctl(8), systat(1), and vmstat(8)
when printing values of "struct vmmeter" in kilobytes as
they don't necessarily fit into 32 bits. (Fix sysctl(8)
reporting of a total virtual memory; it's in pages too.)
archs. [1]
- Instead of bus_space_{read,write}*(rman_get_bustag(), rman_get_bushandle())
use bus_{read,write}*() for efficiency.
Reported by: Peter Losher [1]
Tested on: i386, sparc64
MFC after: 2 weeks
2) Reduce the acquisitions of the Giant lock in the nfs_socket.c paths significantly.
- We don't need to acquire Giant before tsleeping on lbolt anymore,
since jhb specialcased lbolt handling in msleep.
- nfs_up() needs to acquire Giant only if printing the "server up"
message.
- nfs_timer() held Giant for the duration of the NFS timer processing,
just because the printing of the message in nfs_down() needed it
(and we acquire other locks in nfs_timer()). The acquisition of
Giant is moved down into nfs_down() now, reducing the time Giant is
held in that path.
Reported by: Kris Kennaway
o ixp425 support
o NPE network driver (requires Intel microcode)
o h/w qmgr support
o True IDE compact flash over expansion bus
o pci (ath and hifn795x parts tested)
o xscale watchdog timer
o ds1672 RTC on i2c bus
o ad7418 voltage + temp monitoring on i2c bus
o uart
Work done together with cognet, kevlo, and jmg. Parts of
the ixp425 support obtaine/derived from netbsd.
Reviewed by: cognet, imp
MFC after: 1 month
