Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
pxeldr, so CLANG_NO_IAS was not previously removed for those.
In the case of pxeldr the difference is that IAS adds a size override
prefix (67h) to three instructions to specify a 32-bit address, even
though the two high bytes are zero and the address fits in 16 bits.
this wastes three bytes per instruction and causes some additional nop
npadding to be required elsewhere in the object, but pxeboot is not
size-constrained so it doesn't matter.
Sponsored by: The FreeBSD Foundation
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
cdboot, so CLANG_NO_IAS was not previously removed for those.
In the case of cdboot the difference is that IAS adds a size override
prefix (67h) to many instructions to specify a 32-bit address, even
though the two high bytes are zero. This wastes three bytes per
instance, but as cdboot is not size-constrained it doesn't matter.
Padding is also different in one case; Clang used two one-byte nops
while GNU as used a single two-byte xchg %eax, %eax. In any case, there
is no functional change.
Sponsored by: The FreeBSD Foundation
Use quad.h from libc instead for the time being. This reduces the number of
nearly-identical-quad.h we have in tree to two with only minor changes.
Prototypes for some *sh*di3 have been added to match the copy in libkern.
The differences between the two are likely few enough that they can perhaps
be merged with little additional effort to bring us down to 1.
MFC after: 3 days
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
boot2, so CLANG_NO_IAS was not previously removed for those.
In the case of boot2 the difference is that IAS produces a larger
encoding for one instruction (the testb at the beginning of read).
GNU as produces:
2e f6 06 b0 08 80
while IAS includes an address size override prefix (67) and produces:
2e 67 f6 05 b3 08 00 00 80
This results in three fewer NOPs elsewhere in boot2 but no functional
change, so switch to IAS for boot2.
(We can separately pursue improved 16-bit IAS support with the LLVM
developers.)
Sponsored by: The FreeBSD Foundation
We should support removing vdev from boot pool. Update loader zfs reader
to support com.delphix:removing.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18901
The chain command can be used to chain load another binary.
If veriexec is enabled we should verify it first.
Note that on EFI systems the verification was already done
through firmware, assuming that Secure Boot was enabled there.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
MFC after: 1 week
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D20952
The HandleProtocol() is deprecated interface and we should use OpenProtocol()
instead. Moreover, in some firmware implementation(s), the HandleProtocol()
does return device path using static storage, so we can not keep the value
returned there. With same firmware, the OpenProtocol() does return data we
do not need to clone.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D21162
Guest PPC OSs running under a hypervisor may communicate the features they
support, in order for the hypervisor to expose a virtualized machine in the way
the client (guest OS) expects (see LoPAPR 1.1 - B.6.2.3).
This is done by calling the "/ibm,client-architecture-support" (CAS) method,
informing supported features in option vectors. Until now, FreeBSD wasn't
using CAS, but instead relied on hypervisor/QEMU's defaults.
The problem is that, without CAS, it is very inconvenient to run POWER9 VMs on
a POWER9 host running with radix enabled. This happens because, in this case,
the QEMU default is to present the guest OS a dual MMU (HPT/RPT), instead of
presenting a regular HPT MMU, as FreeBSD expects, resulting in an early panic.
The known workarounds required either changing the host to disable radix or
passing a flag to QEMU to run in a POWER8 compatible mode.
With CAS, FreeBSD is now able to communicate that it wants an HPT MMU,
independent of the host setup, which now makes FreeBSD work on POWER9/pseries,
with KVM enabled and without hugepages (support added in a previous commit).
As CAS is invoked through OpenFirmware's call-method interface, it needs to be
performed early, when OpenFirmware is still operational. Besides, now that FDT
is the default way to inspect the device tree on PPC, OFW call-method feature
will be unavailable by default, when control is passed to the kernel. Because
of this, the call to CAS is being performed at the loader, instead of at the
kernel.
To avoid regressions with old platforms, this change uses CAS only on
POWER8/POWER9.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20827
libsecureboot can tell us if the most recent file opened was
verfied or not.
If it's state is VE_UNVERIFIED_OK, skip if variable
matches one of the restricted prefixes.
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D20909
Summary:
efi loader does not work with static network parameters. It always uses
BOOTP/DHCP and also uses RARP as a fallback. Problems with DHCP servers can
cause the loader to fail to populate network parameters.
Submitted by: Siddharth Tuli <siddharthtuli_gmail.com>
Reviewed by: imp
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D20811
To avoid failures when the large 18MB nvidia.ko module is being loaded,
increase EFI_STAGING_SIZE from 64MB to 100MB on x64 systems.
Leave the other platforms at 64MB.
The code in efihttp.c was assuming that dv_open wouldn't be called if
dv_init failed. But the dv_init return value is currently ignored.
Add a new variable, `efihttp_init_done` and only proceed in dv_open if
it's true. This fixes the loader on systems without efi http support.
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Add support for an HTTP "network filesystem" using the UEFI's HTTP
stack.
This also supports HTTPS, but TianoCore EDK2 implementations currently
crash while fetching loader files.
Only IPv4 is supported at the moment. IPv6 support is planned for a
follow-up changeset.
Note that we include some headers from the TianoCore EDK II project in
stand/efi/include/Protocol verbatim, including links to the license instead
of including the full text because that's their preferred way of
communicating it, despite not being normal FreeBSD project practice.
Submitted by: scottph
Reviewed by: imp, bcran
Differential Revision: https://reviews.freebsd.org/D20643
There are many new features in ZoF. Most, if not all, do not effect read only usage.
Encryption in particular is enabled at the pool level but used at the dataset level.
The loader obviously will not be able to boot if the boot dataset is encrypted, but
should not care if some other dataset in the root pool is encrypted.
Reviewed by: allanjude
MFC after: 1 week
Don't commit to exclusive access to the network device handle by
efinet until the loader has decided to load something through the
network. This allows for the possibility of other users of the
network device.
Submitted by: scottph
Reviewed by: tsoome, emaste
Tested by: tsoome, bcran
Differential Revision: https://reviews.freebsd.org/D20642
At least since version 4.0.0, QEMU became bug-compatible with PowerVM's
vty, by inserting a \0 after every \r. As this confuses loader's
interpreter and as a \0 coming from the console doesn't seem reasonable,
it's now being filtered at OFW console input.
Reviewed by: jhibbits
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20676
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
Add the customary warnings to disable format checking on armv7. Code
move to new files, and the unconditional setting of WARNS to 6
provoked it on tinerbox...
This is a primary boot loader that is intended to implement the
gptboot partition selection algorithm just like we did for BIOS
booting. While the preferred method for UEFI is to use the UEFI Boot
Manager protocol, there are situations where that can't be done: some
BIOS makers interfere with the protocol in unhelpful ways, there's a
new standard for a zero variable write from the client OS, and finally
for USB drives that might be mobile between systems with multiple
partitions there needs to be a media stable way to select.
Reviewed by: tsoome, bcran
Differential Revision: https://reviews.freebsd.org/D20547
Segregate the disk probing and selection protocol from the rest of the
boot loader.
Reviewed by: tsoome, bcran
Differential Revision: https://reviews.freebsd.org/D20547
Simplify the code a bit and rework how we report the results
of the probing.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D20537
BootServices AllocatePool/FreePool calls. They are simpler to use and
result in the same thing happening.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D20540
The D_PARTNONE is documented to make it possible to open raw MBR
partition, but the current disk_open() does not really implement this
statement.
The current code is checking partition against -1 (D_PARTNONE) but does
attempt to open partition table in case we do have FreeBSD MBR partition type.
Instead, we should check -2 (D_PARTWILD).
In case we do have MBR + BSD label, this code is only working because
by default, the first BSD partiton is created starting with relative sector
0, and we can still access the BSD table from that MBR slice.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20501
This is like efi_devpath_match, but allows differing device media
paths. Those just specify the partition information.
Differential Revision: https://reviews.freebsd.org/D20513
* Fix boot env back compat
zfsboot must try zfsloader before loader in order to remain compatible
with boot environments created prior to zfs functionality being rolled
into loader proper.
* Improve comments in zfsboot
Explain the significance of the load path order, and put the comment
about looping through the paths in the appropriate scope.
Obtained From: TrueNAS commit 4c60c62fcf0b6b6eac98ee8d46e7bbea64bc86f5
Submitted by: Ryan Moeller <ryan@freqlabs.com>
loader.rc has comment lines without a trailing space, which get
interpreted as commands. Avoid this by only matching against the
backslash character.
Reviewed by: imp, tsoome
Differential Revision: https://reviews.freebsd.org/D20491
