Previously the code would branch on top find out whether it should
branch on SDT probe and bumping the numposhits counter, depending
on cache_fplookup_cross_mount.
Arguably it should be done regardless of what said function returns.
Try to standardize how drivers negotiate feature and the
function names
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27930
- Add and fix a few error path counters
- Improve sysctl descriptions
- Use flags consistently to determine IPv4 vs IPv6
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27926
Prior to V1, the driver would enable interrupts and then notify the
host that DRIVER_OK. Since for V1, DRIVER_OK needs to be set before
notifying the virtqueues, there may be items in the queues waiting
to be processed by the time interrupts are enabled.
This fixes a bug where the Rx queue would appear stuck, only being
usable after an interface down/up cycle.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27922
For multiqueue, we may use fewer than the provided maximum number of
queues. Try to limit allocations of the unused queues: no interrupts,
no indirect descriptors, and no taskqueues.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27921
Verify the max_virtqueue_pairs is within the range allowed by
the spec.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27920
This useful when running on hosts that support checksum offloading
but not the GUEST_TSO (LRO) feature. Or potentially, some GRO-like
support when doing forwarding.
Only enable SW LRO when the host LRO is not available since both
tends to be harmful, and difficult to enable/disable selectively
with only a single IFCAP_LRO flag.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27919
This allows the Rx checksum and LRO to be modified without a full
reinit of the device.
Remove IFCAP_RXCSUM_IPV6 from the interface capabilities since in
VirtIO Rx checksums are just enabled or disabled for all protocols.
Properly update IFCAP_LRO if LRO is becomes disabled when Rx
checksums are disabled.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27916
In modern VirtIO, the virtqueues cannot be notified before setting
DRIVER_OK status.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27932
Defer the ether_ifattach until the interface capabilities
are configured
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27913
This improves spec compliance because the driver is not suppose
to notify the device prior to setting the DRIVER_OK status, which
could happen with the VIRTIO_NET_F_CTRL_MAC_ADDR.
The VIRTIO_NET_F_MAC feature should always be negotiated so would
be a rare situation.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27910
This may have been required in an early, early, early version of the
specification but I cannot find any reference to it, and a promiscuous
default seems very odd so remove this code.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27909
This features lets the guest driver know the speed and duplex of
the "link". Instead of trying to support many media types based
on the possible/likely speeds/duplexes, only use the speed to
set the interface baudrate.
Cleanup ifmedia code to match other drivers.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27908
This feature lets the guest driver know the maximum MTU size
supported by the host device. If set, use this to limit the
acceptable MTUs, and improve how the receive mbuf cluster size
then is selected.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27907
- Fix the NEEDS_CSUM and DATA_VALID checksum flags. The NEEDS_CSUM
checksum is incomplete (partial) so offer a fallback for the driver
to calculate the checksum. Simplify DATA_VALID because we know
the host has validated the checksum.
- Default 4K mbuf clusters for mergeable buffers. May need to
scale this down to 2K clusters in certain configurations such
many queue pairs, big queues (like 4096 in GCP), and low memory.
- Use the MTU when calculated the receive mbuf cluster size
when not doing TSO/LRO. This will need more adjustment once
the MTU feature is supported.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27906
Very basic support to get packets flowing on modern QEMU but still
several conformance issues remain that will be addressed in later
commits.
First of many passes at cleaning up various accumulated cruft
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27904
Rework the header file changes from 2cc8a52 to use our
canonical upstream, Linux.
geom_disk already checks DISKFLAG_CANDELETE for BIO_DELETE
so remove an unnecessary check.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27902
This only supports the legacy virtqueue format that is now called
"Split Virtqueues". Support for the new "Packed Virtqueues" described
in v1.1 is left for a later date.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27857
Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
And subsequent fix 576b099a.
By adding the mergable header to the vtnet_rx_header structure, the size
was increased by 2 bytes, breaking the alignment of this structure as
described the in preceding comments.
Furthermore, the mergable header does not belong the structure. With the
mergable feature, the header is placed in line with the data, so there is
no need for a separate segment, and misleading to follow the mergable
header with any padding.
The V1 header is effectively identical to mergable header, and the driver
has long supported the mergable feature. Revert this so the later changes
that add V1 support can show how V1 is derived from the existing mergable
buffers support, and to facilitate a later MFC.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27855
The current postfix conversions are:
CURRENT / STABLE / PRERELEASE, 12.x-CURRENT becomes 12.snapYYYYMMDDhhmmss
ALPHAx -> .ax, so 11.3-ALPHA1 becomes 11.3.a1.YYYYMMDDhhmmss
BETAx -> .bx, so 12.1-BETA2 becomes 12.1.b2.YYYYMMDDhhmmss
RCx -> .rcx, so 13.0-RC3 becomes 13.0.rc3.YYYYMMDDhhmmss
RELEASE -> (nothing), so 12.1-RELEASE becomes 12.1
RELEASE-pX -> pX, so 12.1-RELEASE-p1 becomes 12.1p1
Note that for development branches we will start to drop the minor version
component entirely, which more closely matches how these branches are
physically named (stable/NN).
snap is a new prefix that was added to pkg in [0], which is simply a more
verbose version of the current ".s" used.
As noted, build timestamps are also added to ALPHA/BETA/RC versions. This
is largely irrelevant for re@ snapshots because they will only produce one
set of snapshots for each alpha/beta/rc, but external folks may produce
multiple in that timeframe -- at least for alpha. For them, it is
imperative that the builds have a differentiating characteristic like this
rather than multiple builds across multiple revisions being versioned
identically.
[0] https://github.com/freebsd/pkg/pull/1929
Reviewed by: gjb, manu
Submitted by: rene (original, original version)
Differential Revision: https://reviews.freebsd.org/D28167
Move prison_hold, prison_hold_locked ,prison_proc_hold, and
prison_proc_free to a more intuitive part of the file (together with
with prison_free and prison_free_locked), and add or improve comments
to these and others, to better describe what's going in the prison
reference cycle.
No functional changes.
Use a machdep.nirq tunable intead of compile-time constant NIRQ
as a value for maximum number of interrupts. It allows keep a system
footprint small by default with an option to increase the limit
for large systems like server-grade ARM64
Reviewd by: mhorne
Differential Revision: https://reviews.freebsd.org/D27844
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
Rather than depending on malloc() returning 16-byte aligned chunks,
allocate some extra pad bytes and ensure that key schedules are
appropriately aligned.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D28157
The context record contains key material precomputed by the driver at
session creation time. Rather than storing various components of the
context record in each session, go a bit further and store the full
context record image so that safexcel_process() can simply copy the
image into each request submitted to the hardware. This simplifies the
data path and eliminates a bunch of unnecessary conditional logic that
was getting executed for each request.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Rather than preallocating a set of requests and moving them between
queues during state transitions, maintain a shadow of the command
descriptor ring to track the driver context of each request. This is
simpler and requires less synchronization between safexcel_process() and
the ring interrupt handler.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Rather than returning a hard error in this case, return ERESTART so that
upper layers get a chance to retry the request (or drop it, depending on
the desired policy).
This case is hard to hit due to the somewhat low bound on queued
requests, but that will no longer be true after an upcoming change.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
This gives better performance in some tests than the previous policy of
statically binding each session to a ring.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
