sbt is the time in the future that the tsleep_sbt() is expected to be completed
at. sbtt is the current time. Depending on the precision with sysctl
kern.timecounter.alloweddeviation the start time may be incremented by
tc_tick_sbt. The same increment is needed for the current time of sbtt before
calculating the difference. The impact of missing this increment is that rmtp
may increase by one tc_tick_sbt on every early [EINTR] return. If the same
struct is passed in for rqtp as rmtp this can result in rqtp effectively
incrementing by tc_tick_sbt and sleeping longer than originally intended.
This problem was introduced in r247797.
Reviewed by: kib, markj, vangyzen (all on an older version of the test)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14362
Don't declare some types that FreeBSD incorrectly declares.
Fix an incorrect call to open() (missing mode).
ANSIfy prototypes.
Enable SysV message queue, semaphore, and shared memory tests.
With exception of the workaround for union semun, these fixes have been
committed to NetBSD.
Reviewed by: asomers
Approved by: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13471
sparc64 and riscv do not support 10 arguments, but MIPS now does.
While here, combine clauses for architectures that support the same
number of arguments to reduce duplication.
Sponsored by: DARPA / AFRL
The test was marked as an expected failure in r320414 after r319971's import
of a newer jemalloc removed an essential feature (opt.redzone) for
reproducing the behavior it was testing. Since then, no way has been found
or demonstrated to reliably test the behavior, so remove the test.
PR: 220309
The man page is years out of date regarding errors. Our implementation _does_
allow unaligned addresses, and it _does_not_ check for negative lengths,
because the length is unsigned. It checks for overflow instead.
Update the tests accordingly.
Reviewed by: bcr
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13826
Previously added tests only check that fgrep is somewhat sane and works. Add
some more tests that check that the implementation is basically functional
and not producing incorrect results with various flags.
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12056
Currently, regex(3) exhibits the following wrong behavior as demonstrated
with sed:
- echo "a{1,2,3}b" | sed -r "s/{/_/" (1)
- echo "a{1,2,3}b" | sed "s/\}/_/" (2)
- echo "a{1,2,3}b" | sed -r "s/{}/_/" (3)
Cases (1) and (3) should throw errors but they actually succeed, and (2)
throws an error when it should match the literal '}'. The correct behavior
was decided by comparing to the behavior with the equivalent BRE (1)(3) or
ERE (2) and consulting POSIX, along with some reasonable evaluation.
Tests were also adjusted/added accordingly.
PR: 166861
Reviewed by: emaste, ngie, pfg
Approved by: emaste (mentor)
MFC after: never
Differential Revision: https://reviews.freebsd.org/D10315
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
Given an empty pattern (i.e. grep "" A B), bsdgrep(1) would previously exit()
with the appropriate exit code upon encountering an empty file. Likely intended
as an optimization, but this behavior is technically incorrect since an empty
pattern should match every line.
PR: 220924
Reviewed by: emaste, cem (earlier version), ngie
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11698
BREs recently became prematurely sensitive to the branching operator, which
outright broke expressions that used it instead of failing silently. Test
that \| is matching a literal | for the time being.
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11577
ATF cleanup routines run in separate processes from the tests themselves, so
they can't share global variables.
Also, setdomainname_test needs to be is_exclusive because the test cases
access a global resource.
PR: 219967
Reviewed by: ngie
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11188
the limit to 32MB instead.
Require user=root and memory=64MB+ first so one can be reasonably sure that
the test will function appropriately.
MFC after: 1 month
MFC with: r320726
PR: 220502
This change implements NOTE_ABSTIME flag for EVFILT_TIMER, which
specifies that the data field contains absolute time to fire the
event.
To make this useful, data member of the struct kevent must be extended
to 64bit. Using the opportunity, I also added ext members. This
changes struct kevent almost to Apple struct kevent64, except I did
not changed type of ident and udata, the later would cause serious API
incompatibilities.
The type of ident was kept uintptr_t since EVFILT_AIO returns a
pointer in this field, and e.g. CHERI is sensitive to the type
(discussed with brooks, jhb).
Unlike Apple kevent64, symbol versioning allows us to claim ABI
compatibility and still name the new syscall kevent(2). Compat shims
are provided for both host native and compat32.
Requested by: bapt
Reviewed by: bapt, brooks, ngie (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D11025
Basic sanity tests as well as coverage for the bug fixed in r318565.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: bapt, ngie
Differential Revision: https://reviews.freebsd.org/D10827
Metadata printing with -b, -H, or -n flags suffered from a few flaws:
1) -b/offset printing was broken when used in conjunction with -o
2) With -o, bsdgrep did not print metadata for every match/line, just
the first match of a line
3) There were no tests for this
Address these issues by outputting this data per-match if the -o flag is
specified, and prior to outputting any matches if -o but not --color,
since --color alone will not generate a new line of output for every
iteration over the matches.
To correct -b output, fudge the line offset as we're printing matches.
While here, make sure we're using grep_printline in -A context. Context
printing should *never* look at the parsing context, just the line.
The tests included do not pass with gnugrep in base due to it exhibiting
similar quirky behavior that bsdgrep previously exhibited.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10580
We should not set an arbitrary cap on the number of matches on a line,
and in any case MAX_LINE_MATCHES of 32 is much too low. Instead, if we
match more than MAX_LINE_MATCHES, keep processing and matching from the
last match until all are found.
For the regression test, we produce 4096 matches (larger than we expect
we'll ever set MAX_LINE_MATCHES) and make sure we actually get 4096
lines of output with the -o flag.
We'll also make sure that every distinct line is getting its own line
number to detect line metadata not being printed as appropriate along
the way.
PR: 218811
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reported by: jbeich
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10577
The previous logic was flawed in the sense that it assumed that /dev/md3
was always available. This was a caveat I noted in r306038, that I hadn't
gotten around to solving before now.
Cache the device for the mountpoint after executing mdmfs, then use the
cached value in basic_cleanup(..) when unmounting/disconnecting the md(4)
device.
Apply sed expressions to use reuse logic in the NetBSD code that could
also be applied to FreeBSD, just with different tools.
Differential Revision: D10766
MFC after: 1 week
Reviewed by: bdrewery
Sponsored by: Dell EMC Isilon
The kern.coredump sysctl can be set to 0 to disable coredumps. Skip the
'status_coredump' and 'wait6_coredumped' tests if this sysctl is set to 0
rather than reporting a failure.
Submitted by: brooks
Reviewed by: ngie
Obtained from: CheriBSD
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10665
The existing 'binary' test in netbsd-tests/ does a basic check of the
default treatment for binary behavior, but not much more than that.
Given some opportunity for breakage recently that did not trigger any
failures, add some tests to cover the three different binary file
behaviors (a, -I, -U) and their --binary-files= equivalent values.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10620
This is being done to avoid dereferencing a NULL pointer via strlcat,
obscuring the underlying issue with the getcwd(3) call.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Previously, when given a negative -A/-B/-C argument bsdgrep would
overflow the respective context flag(s) and exhibited surprising
behavior.
Fix this by removing unsignedness of Aflag/Bflag and erroring out if
we're given a value < 0. Also adjust the type used to track 'tail'
context in procfile() so that it accurately reflects the Aflag value
rather than overflowing and losing trailing context.
This also fixes an inconsistency previously existing between -n and
-C "n" behavior. They are now both limited to LLONG_MAX, to be
consistent.
Add some test cases to make sure grep errors out properly for both
negative context values as well as non-numeric context values rather
than giving bogus matches.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10675
- Apply the logic to the FreeBSD block
- Fix a typo with the getconf(1) call that I would have caught, were
it not for the fact that I got the blocks wrong.
- Consolidate the hardcoded buffer sizes to the NetBSD block.
This would have been discovered had I run the test on a system where
PATH_MAX != 1024 (I don't have that at my disposal right at this moment).
MFC after: 3 weeks
MFC with: r318210
Sponsored by: Dell EMC Isilon
In the event the value of PATH_MAX was changed, the assumption that
MAXPATHLEN is 1024 (and hence the buffer length required to trigger
SSP to fail for read(2)) would be invalidated. Query getconf(1) for
the actual value of MAXPATHLEN via _XOPEN_PATH_MAX instead, and
increment the value by 1 to ensure that the SSP support tests the
stack smashing support properly.
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Refactoring done in r317703 broke -c, -l, and -L flags implying
suppression of match printing. Fortunately this is just a matter of not
doing any printing of the resulting matches and context printing was not
broken in this refactoring.
Add some regression tests since this area may still see further
refactoring, include different context flags as well even though they
were not broken in this case.
PR: 219077
Submitted by: Kyle kevans91@ksu.edu
Reported by: markj
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10607
-w flag matching with an empty pattern was generally 'broken', allowing
matches to occur on any line whether or not it actually matches -w
criteria.
This fix required a good amount of refactoring to address. procline()
is altered to *only* process the line and return whether it was a match
or not, necessary to be able to short-circuit the whole function in case
of this matchall flag. -m flag handling is moved out as well because it
suffers from the same fate as context handling if we bypass any actual
pattern matching.
The matching context (matches, mostly) didn't previously exist outside
of procline(), so we go ahead and create context object for file
processing bits to pass around. grep_printline() was created due to
this, for the scenarios where the matches don't actually matter and we
just want to print a line or two, a la flushing the context queue and
no -o or --color specified.
Damage from this broken behavior would have been mitigated by the fact
that it is unlikely users would invoke grep -w with an empty pattern.
This was identified while checking PR 105221 for problems it this may
cause in BSD grep, but PR 105221 is *not* a report of this behavior.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Differential Revision: https://reviews.freebsd.org/D10433
Work in progress (D10315) is going to make egrep_empty_invalid an
actually invalid regex, to be consistent with the equivalent BRE "{"
behavior, when using regex(3).
Any non-0 exit value is acceptable, depending on how the installed grep
interprets the expression. GNU grep interprets it as non-matching, and
in the future BSD grep will interpret it is an error.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10572`
-w and -v flag matching was mostly functional but had some minor
problems:
1. -w flag processing only allowed one iteration through pattern
matching on a line. This was problematic if one pattern could match
more than once, or if there were multiple patterns and the earliest/
longest match was not the most ideal, and
2. Previous work "fixed" things to not further process a line if the
first iteration through patterns produced no matches. This is clearly
wrong if we're dealing with the more restrictive -w matching.
#2 breakage could have also occurred before recent broad rewrites, but
it would be more arbitrary based on input patterns as to whether or not
it actually affected things.
Fix both of these by forcing a retry of the patterns after advancing
just past the start of the first match if we're doing more restrictive
-w matching and we didn't get any hits to start with. Also move -v flag
processing outside of the loop so that we have a greater change to match
in the more restrictive cases. This wasn't strictly wrong, but it could
be a little more error prone.
While here, introduce some regressions tests for this behavior and fix
some excessive wrapping nearby that hindered readability. GNU grep
passes these new tests.
PR: 218467, 218811
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10329
The test suite currently lacks basic sanity checks to ensure that egrep,
fgrep, and grep are actually matching the right expression types, i.e. passing
the right flags to regcomp(3). Amend the test suite to make sure that not only
are the individual versions doing the right thing, but also that we don't have some
kind of frankenregex situation happening where egrep is accepting a BRE or
grep an ERE.
I've chosen to not expand the 'basic' test but to add the 'grep_sanity' checks
to their own test case since this is testing for more than just 'grep matches things',
but actual expression types.
Differential Revision: D10444
Reviewed by: emaste, ngie
Submitted by: Kyle Evans <kevans91@ksu.edu>
Tested with: bsdgrep, gnu grep (base, ports)
Sponsored by: Dell EMC Isilon
They're no longer needed after recent fixes made to bsdgrep(1).
Submitted by: Kyle Evans <kevans91@ksu.edu> (via a previous diff in D10433)
Sponsored by: Dell EMC Isilon
r316477 broke zero-length matches when not using the -o flag, by
skipping over them entirely.
Add a regression test so that it doesn't break again in the future.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem emaste ngie
Differential Revision: https://reviews.freebsd.org/D10333
Create additional tests to cover regressions that were discovered by
PRs linked to reviews D10098, D10102, and D10104.
It is worth noting that neither bsdgrep(1) nor gnugrep(1) in the base
system currently pass all of these tests, and gnugrep(1) not quite being
up to snuff was also noted in at least one of the PRs.
PR: 175314 202022 195763 180990 197555 197531 181263 209116
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem, ngie, emaste
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10112
Restore the stock (upstream) code under an #else block, so it's easier
for me to visualize and understand the code that needs to be upstreamed.
MFC after: 2 months
X-MFC with: r316178, r316179, r316180
Sponsored by: Dell EMC Isilon
msgsnd(2)'s msgsz argument does not describe the full structure, only the
message component.
Reported by: Coverity
CIDs: 1368703, 1368711
Sponsored by: Dell EMC Isilon
msgsnd's msgsz argument is the size of the message following the 'long'
message type. Don't include the message type in the size of the message
when invoking msgsnd(2).
Reported by: Coverity
CID: 1368712
Sponsored by: Dell EMC Isilon
This is no longer required as of r315616, as the test is no longer
built/installed.
This is being done to diff reduce with NetBSD.
Sponsored by: Dell EMC Isilon
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
The reasoning for this is the same as r276046: to ease MFCing the tests
to ^/stable/10 .
This was accidentally missed in r313439
MFC after: 1 week
X-MFC with: r313439
Sponsored by: Dell EMC Isilon
This function allows the caller to specify the reference clock
and choose between absolute and relative mode. In relative mode,
the remaining time can be returned.
The API is similar to clock_nanosleep(3). Thanks to Ed Schouten
for that suggestion.
While I'm here, reduce the sleep time in the semaphore "child"
test to greatly reduce its runtime. Also add a reasonable timeout.
Reviewed by: ed (userland)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9656
