o when turning off the socket for a 16-bit card, write 0 to INTR register
rather than just tying to just clear the rest bit. this seems to fix
card insert detection after an eject on TI bridges (ricoh bridges work
either way, apparently). This is a MFp4.
o Cope better with TOPIC95 bridges on powerup. According to NetBSD driver,
these bridges don't set POWER_STATE, so cope accordingly in our power
code. They also need a little extra time to settle, so do that as well.
o It appears that we need to turn on/off one of the clocks to the card
when we power up/down that socket on a TOPIC97, also from NetBSD.
o TOPIC97 bridges need to specifically enable LV card support. Unconditionally
do this in the hopes that all laptops that have these chips support LV
voltages (they should, since they are required for CardBus).
o TOPIC register name regularization. Registers specific to models of TOPIC
are now called out as such.
# I need a machine with a TOPIC95 for testing.
space that enables low voltage operation (and maybe other stuff).
Enable the bits in this register so low voltage 16-bit cards may work.
Existance noticed in NetBSD driver.
Instead the threshould is initialized in device attach. Later the
threshold could be increased in Tx underrun error and the new
threshold should be used in xl_init_locked().
think the RealTek PHY needs driver to set RGEPHY_BMCR_AUTOEN bit of
RGEPHY_MII_BMCR register and proper ANAR register setting for manual
media type selection.
This fixes long standing manual media type selection bug in rgephy(4).
Reported by: Jelte Jansen <jelte AT NLnetLabs DOT nl>
Tested by: Jelte Jansen <jelte AT NLnetLabs DOT nl>
Use proper pointer dereference to inform modified mbuf chains to
caller.
While I'm here perform checksum offload setup after loading DMA
maps.
In collaboration with: glebius
Use proper pointer dereference to inform modified mbuf chains to
caller.
While I'm here perform checksum offload setup after loading DMA
maps as m_defrag(9) can return new mbuf chains.
In collaboration with: glebius
WB (write-back) on x86 via control bits in PTEs and PDEs (including making
use of the PAT MSR). Changes include:
- A new pmap_mapdev_attr() function for amd64 and i386 which takes an
additional parameter (relative to pmap_mapdev()) specifying the cache
mode for this mapping. Note that on amd64 only WB mappings are done with
the direct map, all other modes result in a private mapping.
- pmap_mapdev() on i386 and amd64 now defaults to using UC (uncached)
mappings rather than WB. Previously we relied on the BIOS setting up
MTRR's to enforce memio regions being treated as UC. This might make
hw.cbb_start_memory unnecessary in some cases now for example.
- A new pmap_mapbios()/pmap_unmapbios() API has been added to allow places
that used pmap_mapdev() to map non-device memory (such as ACPI tables)
to do so using WB as before.
- A new pmap_change_attr() function for amd64 and i386 that changes the
caching mode for a range of KVA.
Reviewed by: alc
This way one will be able to use provider encrypted on eg. i386 on
eg. sparc64. This doesn't really buy us much today, because UFS isn't
endian agnostic.
We retain backward compatibility by setting G_ELI_FLAG_NATIVE_BYTE_ORDER
flag on devices with version number less than 2 and not converting the
offset.
before tagging them. This can help to work around brain-damage in some
switches that fail to pad a frame after untagging it if its length drops
below the minimum. This option is blessed by IEEE Std 802.1Q (2003 Ed.),
paragraph C.4.4.3.b. It's controlled by sysctl net.link.vlan.soft_pad.
Idea by: az
MFC after: 1 week
82571EB quad port copper NIC and has few minor fixes.
Details:
- if_em.c. Merged manually, viewing diff between new vendor
driver and previous one.
- if_em_hw.c. Dropped in from vendor, and then restored
revision 1.15.
8k boundary with this program still.
text data bss dec hex filename
7925 4 4476 12405 3075 bootiic.out
so we have like 293 bytes left before we have to play games. There
may be ways to reduce that somewhat, but they start to be very board
specific.
changes in the future. This helps with getting started and to
overcome the really sucky level of granuality this timeout has in
getc. A timeout of 1 means 'wait until top of next second' rather
than 'wait for at least a second'.
o include current tx rate in stats so athstats gets a consistent
snapshot and doesn't have to make an extra ioctl
o record tx rate for raw frames
MFC after: 3 weeks
o change rssi to be signed in ieee80211_nodestats
o add noise floor in ieee80211_nodestats (use an implicit hole to
preserve layout); return it as zero until we can update the api's
so the driver can provide noise floor data
o add a bandaid so IEEE80211_IOC_STA_STATS works for sta mode; when
all nodes are in the station table this will no longer be needed
o fix braino in IEEE80211_IOC_STA_INFO implementation; was supposed
to take a mac address and return info for that sta or all stations
if ff:ff:ff:ff:ff was supplied--but somehow this didn't get implemented;
implement the intended semantics and leave a compat shim at the old
ioctl number for the previous api
Reviewed by: mlaier
MFC after: 3 weeks
o add some missing stats to the global stat structure
o move accounting work for data frame rx into ieee80211_deliver_data
o add per-sta stats for rx ucast/mcast frames
o set rcvif in ieee80211_deliver_data so callers don't need to
MFC after: 2 weeks
o PMBR partitions count to the number of partitions on the disk, which
means that if a PMBR entry is invalid we will not treat the MBR as a
PMBR by virtue of it not describing any partitions.
Previously the checks were inconsistent in that an invalid PMBR entry
would be harmless when no other partitions exist (we would treat the
MBR as a PMBR by virtue of it being empty), but it would be fatal when
there is at least one other partition.
o The partition size of a PMBR partition is one less than the media size
because the GPT starts at the second sector (LBA 1) and extends to
the end of the media. For backward bug-compatibility we accept a size
that's exactly the media size (FreeBSD bug).
Also, when the partition size can not be represented in a 32-bit
integral, the partition size in the MBR is to be set to 0xFFFFFFFF.
Accept this as a valid size, even if the size can be represented.
from the actual geometry. This enables support of disks larger than
~120GB on pc98 boxes. They make great little network appliances.
I've been using these changes for the past year or so on my network
storage pc98 box :-).
of geometry. However, some platforms have a more complicated mapping
of the firmware values to the actual values. pc98 is the only
platform that currently does this. This mapping is necessary for
large disks connected to pc98 boxes, as the firmware labels require do
special hacks to the actual geometry for interoperability. We cannot
do this all in the geom layer because of initialization issues (geom
looks for an already initialized pc98 label, but we need the geometry
information prior to initialization, classic chicken and egg problem).
We pass the disk and the device_t to this function because the
geometry mapping depends on what kind of controller is used.
This hook allows platforms that want to override things to do so, and
has 0 overhead on all other platforms. These patches have been in use
locally for a long time, and received good feedback from the pc98
community and sos@ at various times during their development.
MFC After: 1 week
synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
a file system, but need to obtain a vnode. We may not be able to do it, because
all vnodes could be already in use and other processes cannot release them,
because they are waiting in "suspfs" state.
In such situation, we allow to allocate a vnode anyway.
This is a temporary fix - there is no backpressure to free vnodes allocated in
those circumstances.
MFC after: 1 week
Reviewed by: tegge
- Store the Ethernet header in node softc.
- Initialize header with dst addr and ethertype in node
constructor method.
- In node connect method send NGM_ETHER_GET_ENADDR message
downwards.
- If received reply from ng_ether(4) store the src addr
in softc.
- Add NGM_PPPOE_SETENDADDR message that allows user to
override the address with whatever he/she wants.
set the MTU prior to mounting root via NFS. This is required if the
server supports a higher than default MTU because the client will not
see the responses otherwise.
MFC after: 3 weeks
cards stopped working. Specifically the AVM B1 PCMCIA Card no longer
detected. Its CIS chain read back as all FF's. Putting the delay
back solves those problems. I've opted to put in a much shorter delay
because as far as I can tell, no delay is really needed here. We'll
see how well this works in practice.
we obtained access. It is possible that GPT gets to taste a disk
first, which means the disk has not been opened before and it will
not get opened until after we checked the mediasize and sectorsize.
However, since the mediasize and sectorsize are determined at open
and that happens when access is optained, checking the mediasize
and sectorsize before obtaining access may result in GPT rejecting
the disk.
whole the physical memory, cached, using 1MB section mappings. This reduces
the address space available for user processes a bit, but given the amount of
memory a typical arm machine has, it is not (yet) a big issue.
It then provides a uma_small_alloc() that works as it does for architectures
which have a direct mapping.
Two almost identical patches based on the if_tap work were submitted
via GNATS; I started out with the patch in 100796 from David Gilbert,
but could have easily started with the patch from Vilmos Nebehaj which
I found only later.
MFC after: 1 week
PR: 93976, 100796
and vn_fullpath (that call malloc(..., M_WAITOK)) from under the
vm object lock, since sleep is not allowed while holding the mutex.
Being there, wrap VOP_GETATTR call with conditional Giant aquire.
Currently this is (almost) noop because pseudofs is Giant-locked.
Tested by: kris
Approved by: pjd (mentor)
MFC after: 2 weeks
function independently. This change is not only load-tested since I don't
have hardware that supports acpi_dock. Clean up comments and a name a
few constants.
is interaction between in-kernel sound buffer handling and hardware.
With small buffer, there are times when both harwdare reads and
kernel writes to the same buffer (it is only visible on slow machines, i
think). I'm digging in channel.c and buffer.c to find a solution that
allow use of large hardware buffers without sound lags - hardware can
handle buffers up to 32Mb."
Submitted by: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
that aren't listed as valid in the link device's set of possible IRQs.
This allows the hints to be used to work around broken BIOSes that don't
specify the correct ste of possible IRQs. A warning is issued in the
dmesg in this case to be consistent with the $PIR handling code.
MFC after: 1 week
uipc_proto.c to uipc_usrreq.c, making localdomain static. Remove
uipc_proto.c as it's no longer used. With this change, UNIX domain
sockets are entirely encapsulated in uipc_usrreq.c.
- Print node ID, where possible.
- Prepend log messages with function name, or at least with "ng_pppoe".
Reviewed by: julian
Tested by: Joao Barros <joao.barros gmail.com>
This enables the scanner function on these devices to be detected
and probed by uscanner(4), but only when ulpt is not loaded.
PR: usb/92462
Submitted by: Friedrich Volkmann
MFC after: 30 days
_SOLARIS_C_SOURCE is defined.
The _OpenSolaris_version is set to match the last import of the OpenSolaris
tar ball and is based on the date in that file name.
are only visible if _SOLARIS_C_SOURCE is defined.
Note thar FreeBSD stat() and fstat() are 64-bit functions now and Solaris
still persists with both 32- and 64-bit versions. When I query this, I am
referred to: <http://www.unix.org/version2/whatsnew/lfs20mar.html>.
But when you look at the main page of unix.org you will see that the
Single Unix Specification <http://www.unix.org/version3/> is the most
recent standard they are pushing. And there are no stat64() fstat64()
functions defined there. I guess this just goes to prove that there are so
many standards, you can take your pick.
