The LSB 4.1 that I referenced omitted the varargs, and I failed to catch it.
The __vsnprintf_chk error was from just downright misreading the page. GCC6
caught all of these, but I had only tested GCC4.2.
X-MFC-With: r356356
For libssp.so, rebuild stack_protector.c with FORTIFY_SOURCE stubs that just
abort built into it.
For libssp_nonshared.a, steal stack_protector_compat.c from
^/lib/libc/secure and massage it to maintain that __stack_chk_fail_local
is a hidden symbol.
libssp is now built unconditionally regardless of {WITH,WITHOUT}_SSP in the
build environment, and the gcclibs version has been disconnected from the
build in favor of this one.
PR: 242950 (exp-run)
Reviewed by: kib, emaste, pfg, Oliver Pinter (earlier version)
Also discussed with: kan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22943
A future commit will rebuild this as part of libssp. The exact warnings are
fairly trivially fixed:
- No previous declaration for __stack_chk_guard
- idx is the wrong type, nitems yields a size_t
- Casting away volatile on the tmp_stack_chk_guard directly is a no-no.
Reviewed by: kib, emaste, pfg, Oliver Pinter (earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22943
accounting for each NUMA domain. Independent keg domain locks are important
with cross-domain frees. Hashed zones are non-numa and use a single keg
lock to protect the hash table.
Reviewed by: markj, rlibby
Differential Revision: https://reviews.freebsd.org/D22829
GCC issues the warning, but with LLVM it is fatal- no matching .cprestore
with .cpload. Reserve some place on the stack and and add the proper
.cprestore to pair it with.
nop added in the !o32 branch to fill out delay slot instruction, just in
case.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D21697
The goal here is to make it so applications can take the rights one would
normally get by calling caph_limit_stream() on a descriptor and build on
them as needed.
The tentatively planned use-case is an application that takes a socket and
hooks it up to std{err,out,in} for a fork()d child. It may be feasible to
apply limitations to such descriptors as long as it's a superset of those
normally applied to stdio.
Reviewed by: markj, oshobo (prior version; sans manpage addition)
Differential Revision: https://reviews.freebsd.org/D22993
When removing a boot environment iterate over the dependents and process the
snapshots by grabbing any clones. Promote the clones we found and then
remove the target environment.
This fixes the ability to destroy a boot environment when it has been used
to spawn one or more other boot environments.
PR: 242592
Submitted by: Wes Maag <jwmaag gmail com> (with changes by myself)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22953
Update libarchive to 3.4.1
Relevant vendor changes since last update:
Issue #351: Refactor and implement private state logic for write filters
PR #1252: RAR5 reader - verify window size for solid files (OSS-Fuzz 15482)
PR #1255: zip writer - don't append unused NUL for directories
PR #1260: Fix sparse file offset overflow on 32-bit systems
PR #1263: UNICODE filename support for reading lha/lzh format
Issue #1276: Bugfix and optimize archive_wstring_append_from_mbs()
PR #1288: Add the "xattrhdr" option to pax write options
PR #1295: 7z reader - fix reading archives with digests in PackInfo
PR #1296: RAR5 reader - verify window size for multivolume archives
PR #1297: ZIP reader - support LZMA_STREAM_END marker in 'lzma alone' files
Issue #1298: Fix a heap-buffer-overflow in archive_string_append_from_wcs()
OSS-Fuzz 19360, 19362: LHA reader - plug two memory leaks on error
Fix possible off-by-one when dealing with readlink(2)
MFC after: 2 weeks
This code was not actively maintained since it was introduced 10 years ago.
It lacks support for many later GEOM features, such as direct dispatch,
unmapped I/O, stripesize/stripeoffset, resize, etc. Plus it is the only
remaining use of GEOM nstart/nend request counters, used there to implement
live insertion/removal, questionable by itself. Plus, as number of people
commented, GEOM is not the best place for I/O scheduler, since it has
limited information about layers both above and below it, required for
efficient scheduling. Plus with the modern shift to SSDs there is just no
more significant need for this kind of scheduling.
Approved by: imp, phk, luigi
Relnotes: yes
Remove temporary compatibility layer introduced in r351729. More that 3 months
should be enough for everybody who runs HEAD to upgrade to the new kernel
already.
Reviewed by: imp, mjg (mentor)
Approved by: mjg (mentor)
Differential Revision: https://reviews.freebsd.org/D22958
Change the "count_until_fail" option of gnop, now it enables the failing
rating instead of setting them to 100%.
The original patch introduced the new flag, which sets the fail/rate to 100%
after N requests. In some cases, we don't want to have 100% of failure
probabilities. We want to start failing at some point.
For example, on the early stage, we may like to allow some read/writes requests
before having some requests delayed - when we try to mount the partition,
or when we are trying to import the pool.
Another case may be to check how scrub in ZFS will behave on different stages.
This allows us to cover more cases.
The previous behavior still may be configured.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22632
Thanks to this option we can create more then one gnop provider from
single provider. This may be useful for temporary labeling some data
on the disk.
Reviewed by: markj, allanjude, bcr
Differential Revision: https://reviews.freebsd.org/D22304
Per the University California Regents letter, drop the so-called
"advertisement" clause.
Discussed with: bde, kargl (2017)
Differential Revision: https://reviews.freebsd.org/D22928
lock/lock_free decisions in compiled time
Summary:
Enables atomic.c in compiler_rt and forces clang to not emit a call for runtime
decision about lock/lock_free. At compiling time, if clang can't decide if
atomic operation can be lock free, it emits calls to external functions like
`__atomic_is_lock_free`, `__c11_atomic_is_lock_free` and
`__atomic_always_lock_free`, postponing decision to a runtime check. According
to LLVM code documentation, the mechanism exists due to differences between
x86_64 processors that can't be decided at runtime.
On PowerPC and PowerPCSPE (32 bits), we already know in advance it can't be lock
free, so we force the decision at compile time and avoid having to implement it
in an external library.
This patch was made after 32 bit users testing the PowePC32 bit ISO reported
llvm could not be compiled with in-base llvm due to `__atomic_load8` not
implemented.
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: jhibbits, dim
Differential Revision: https://reviews.freebsd.org/D22549
cache area. This allows us to check on bucket space for all per-cpu
buckets with a single cacheline access and fewer branches.
Reviewed by: markj, rlibby
Differential Revision: https://reviews.freebsd.org/D22825
Be explicit about it; the first mention of exFAT is for the MBR type 'ntfs',
and the reader must work back from there to the GPT type and infer that a
reference to MBR ntfs type means ms-basic-data is canonical for exFAT.
(It'd also be great if gpart had convenient aliases that did the right
thing for the partition scheme, such as 'ntfs' => ms-basic-data on GPT
schemes or 'exfat' => 'ntfs' in MBR schemes. The tool is also bad about
providing user-meaningful reasons for EINVAL failures.)
g++9 now warns about having defined an assignment operator but using the
default copy constructor, or vice versa. Avoid the issue in libdevdctl
by just using the default assignment operator too.
Reviewed by: asomers, dim
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22887
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
libmagic only depend on mkmagic if not DIRDEPS_BUILD
libpmc fix -I for libpmcstat
local.dirdeps.mk be even more careful about adding gnu/lib/csu to DIRDEPS
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D22872
- Move libxo.a build to subdirectory (lib/libxo/libxo/Makefile)
- Add .WAIT target to delay encoder build til after libxo
- Use FILES to install encoder library as csv.enc
- Update import script to put xo_config.h in new location
In original GNU libgcc, _Unwind_Backtrace is published with GCC_3.3 version
for all architectures but ARM. For ARM should be publishes with GCC_4.3.0
version. This was originally omitted in r255095, fixed in r318024 and omitted
aging in LLVM libunwind implementation in r354347.
For ARM _Unwind_Backtrace should be published as default with GCC_4.3.0
version , (because this is right original version) and again as
normal(not-default) with GCC_3.3 version (to maintain ABI compatibility
compiled/linked with wrong pre r318024 libgcc)
PR: 233664
It serves no useful purpose and wasn't as popular as its equally meritless
cousin, srandomdev(3).
Setting aside the problems with rand(3) in general, the problem with this
interface is that the seed isn't shared with the caller (other than by
attacking the output of the generator, which is trivial, but not a hallmark of
pleasant API design). The (arguable) utility of rand(3) or random(3) is as a
semi-fast simulation generator which produces consistent results from a given
seed. These are mutually at odd. Furthermore, sometimes people got the
mistaken impression that a high quality random seed meant a weak generator like
rand(3) or random(3) could be used for things like cryptographic key
generation. This is absolutely not so.
The API was never part of a standard and was not widely used in tree. Existing
in-tree uses have all been removed.
Possible replacement in out of tree codebases:
char buf[3];
time_t t;
time(t);
strftime(buf, sizeof(buf), "%S", gmtime(&t));
srand(atoi(buf));
Relnotes: yes
The settings in arith.h were not fully defined on powerpc64 after the gdtoa
switchover. Generate them using arithchk.c, similar to what AMD64 did for
r114814.
Technically, none of this is necessary in FreeBSD gdtoa, but since the other
platforms have full definitions, we might as well have full definitions
too.
Approved by: jhibbits (in irc)
Differential Revision: https://reviews.freebsd.org/D22775
r355706 added an instance of offsetof() to the UMA private kernel header
file uma_int.h. Userspace memstat_uma.c includes that header, and
chokes on offsetof() because apparently the definition in sys/types.h is
ifdef _KERNEL. Now, include sys/stddef.h which has an identical
definition.
Pointyhat to: rlibby
Sponsored by: Dell EMC Isilon
to specify an optional separator to insert before partition name;
eg if it's set to "c/", you'll get "ada0c/s1" instead of "ada0s1".
(It cannot be set to just “/“, since ada0 is a device node, not
a directory.)
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D22193
Replace with arc4random.
TACAS+ is a 1993 Cisco extension to the 1984 TACAS. Is this something we want
in base still? The directory has been substantively unmaintained since 2002,
at least.
These functions appear to intend to produce unpredictable results. Just use
arc4random.
While here, use an explicit_bzero instead of memset where the intent is clearly
to zero out a secret (clear_passphrase).
The jevents tool includes a copy of the jsmn json parser which is MIT
licensed. Upstream the MIT license appears in the jsmn.c source and a
standalone LICENSE file, but the latter is not included in the copy
contained in libpmc and the jsmn.h header carried no license information.
Add an SPDX tag to clarify the situation.
Fix multiple problems in the powerpcspe floating point code.
* Endianness handling of the SPEFSCR in fenv.h was completely broken.
* Ensure SPEFSCR synchronization requirements are being met.
The __r.__d -> __r transformations were written by jhibbits.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22526
Two counters included a prefix 'Counter:###\tName:XXX' in their
descriptions that appears to be a leftover from some conversion
process. Remove them.
Found because a json validator tripped over the tab in the description.
These functions (sigandset, sigisemptyset, sigorset) are commonly available
in at least musl libc and glibc; sigorset, at least, has proven quite useful
in qemu-bsd-user work for tracking the current process signal mask in a more
self-documenting/aesthetically pleasing manner.
Reviewed by: bapt, jilles, pfg
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22187
jevents includes a very permissive json parser that accepts invalid
json, of which there are many examples in libpmc (typically extra or
missing commas). Convert the arm64 files to proper json so other tools
can parse them.
Sponsored by: The FreeBSD Foundation
The env space consumed by exporting all libc's .meta files
left little room for command line,
so unexport when done.
Update dirdeps.mk to latest and add
dirdeps-targets.mk to simplify/update targets/Makefile
Makefile changes to go with Makefile.depend changes in D22494
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22495
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
case. Otherwise, linking of clang and other llvm based executables
would complain about missing symbols.
Reported by: rstone
MFC after: 1 month
X-MFC-With: r353358
This change adds PowerPC64 support for minidumps on libkvm.
Address translation, page walk, and data retrieval were tested and seem to be
working correctly.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D21555
to its successor in cases where examining a map entry requires a
helper like kvm_read_all. Use that method, with kvm_read_all, to fix
procstat_getfiles_kvm, which tries to find the successor now without
using such a helper. This addresses a problem introduced by r355491.
Reviewed by: markj (previous version)
Discussed with: kib
Differential Revision: https://reviews.freebsd.org/D22728
As mandated by POSIX. Also clarify the kill(2) manpage.
While there, restructure the code in killpg1() to use helper which
keeps overall state of the process list iteration in the killpg1_ctx
structued, later used to infer the error returned.
Reported by: amdmi3
Reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D22621
This is the half of the changes required that work as-is with both in-tree
ZFS and the new hotness, sysutils/openzfs. Highlights are less dependency
on header pollution (from somewhere) and using 'mnttab' instead of
'extmnttab'. In the in-tree ZFS, the latter is a #define for the former,
but in the port extmnttab is actually a distinct struct that's a super-set
of mnttab. We really want mnttab here anyways, so just use it.
Conditional branch and jump instructions do not always call via PLT
stubs and thus will not honor LD_PRELOAD, etc. lld warns about using
non-preemptible relocations for preemptible or unknown symbols whereas
bfd does not (at least for RISC-V).
Reviewed by: br, James Clarke
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22658
This saves an instruction in each case as well as an extra memory
indirection via the GOT for PIC code.
Reviewed by: br, James Clarke
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22656
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
The resizing could be a downsizing so some data would be lost and we
could attempt to read past the end of the new memory allocation.
MFC after: 2 weeks
Sponsored by: Panzura
This makes it possible to retrieve per-connection statistical
information such as the receive window size, RTT, or goodput,
using a newly added TCP_STATS getsockopt(3) option, and extract
them using the stats_voistat_fetch(3) API.
See the net/tcprtt port for an example consumer of this API.
Compared to the existing TCP_INFO system, the main differences
are that this mechanism is easy to extend without breaking ABI,
and provides statistical information instead of raw "snapshots"
of values at a given point in time. stats(3) is more generic
and can be used in both userland and the kernel.
Reviewed by: thj
Tested by: thj
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20655
negative numbers (invoking undefined behavior)
Summary:
Various paths through hypot(x, y) will multiply x and y by a power of
two, perform the calculation in a range where IEEE-754 provides greater
precision, then undo the multiplication to determine the true result.
Undoing that multiplication is implemented as t1*w, where t1=2**k.
2**k is often computed by taking the high word of 1.0, then adding k<<20
(for doubles or long doubles) or k<<23 (for floats) to it, then
overwriting that high word. But when k is negative this left-shifts a
negative value -- and that's undefined behavior in many editions of C
and C++.
This patch should fix all hypot implementations to compute 2**k without
triggering this particular bit of undefined behavior.
Test Plan: I've only very lightly tested out the hypot(double, double)
change, in SpiderMonkey's JavaScript engine, for consistency with prior
behavior. The other functions' changes have more or less only been
eyeballed. Careful examination appreciated! Do note, however, that an
error in any of these changes would most likely produce a value that is
incorrect by a factor of two, so any mistake would most likely be
glaring if invoked.
Submitted by: Jeff Walden <jwalden@mit.edu>
Obtained from: https://github.com/freebsd/freebsd/pull/414
Reviewed by: dim, lwhsu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22354
Theoretically, this was breaking the size calculation for the symbol.
Noticed when doing a readthrough.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D22525
Summary:
Enable on powerpc64 and in lib/libclang_rt/Makefile change
MACHINE_CPUARCH to MACHINE_ARCH because on powerpc64
MACHINE_ARCH==MACHINE_CPUARCH so the 32-bit library overwrites 64-bit
library during installworld.
This patch doesn't enable any other libclang_rt libraries because they
need to be separately ported.
I have verified that games/julius (which fails on powerpc64 elfv2
without this change because of no libclang_rt profiling library) builds.
Test Plan: Ship it, test on powerpc and powerpcspe
Submitted by: pkubaj
Reviewed by: dim, jhibbits
Differential Revision: https://reviews.freebsd.org/D22425
MFC after: 1 month
X-MFC-With: r353358
Due to ELFv1 specific code in _ctx_start.S and makecontext.c, userspace
context switching was completely broken on ELFv2.
With this change, we now pass the libthr test suite.
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D22421
Add ifdefs in the assembler for soft-float compile case.
Submitted by: Hiroki Mori
Reviewed by: ray@
Differential Review: https://reviews.freebsd.org/D22352
__has_attribute(__constructor__) is a better test for clang than
defined(__clang__). Switch to it instead.
While we're already here and touching it, pfg@ nailed down when GCC actually
introduced the priority argument -- 4.3. Use that instead of our
hammer-guess of GCC >= 5 for the sake of correctness.
The preproc logic was added at the last minute to appease GCC 4.2, and
kevans@ did clearly not go back and double-check that the logic worked out
for clang builds to use the new variant.
It turns out that clang defines __GNUC__ == 4. Flip it around and check
__clang__ as well, leaving a note to remove it later.
Reported by: cem
First, this commit is a NOP on GCC <= 4.x; this decidedly doesn't work
cleanly on GCC 4.2, and it will be gone soon anyways so I chose not to dump
time into figuring out if there's a way to make it work. xtoolchain-gcc,
clocking in as GCC6, can cope with it just fine and later versions are also
generally ok with the syntax. I suspect very few users are running GCC4.2
built worlds and also experiencing potential fallout from the status quo.
For dynamically linked applications, this change also means very little.
rtld will run libc ctors before most others, so the situation is
approximately a NOP for these as well.
The real cause for this change is statically linked applications doing
almost questionable things in their constructors. qemu-user-static, for
instance, creates a thread in a global constructor for their async rcu
callbacks. In general, this works in other places-
- On OpenBSD, __stack_chk_guard is stored in an .openbsd.randomdata section
that's initialized by the kernel in the static case, or ld.so in the
dynamic case
- On Linux, __stack_chk_guard is apparently stored in TLS and such a problem
is circumvented there because the value is presumed stable in the new
thread.
On FreeBSD, the rcu thread creation ctor and __guard_setup are both unmarked
priority. qemu-user-static spins up the rcu thread prior to __guard_setup
which starts making function calls- some of these are sprinkled with the
canary. In the middle of one of these functions, __guard_setup is invoked in
the main thread and __stack_chk_guard changes- qemu-user-static is promptly
terminated for an SSP violation that didn't actually happen.
This is not an all-too-common problem. We circumvent it here by giving the
__stack_chk_guard constructor a solid priority. 200 was chosen because that
gives static applications ample range (down to 101) for working around it
if they really need to. I suspect most applications will "just work" as
expected- the default/non-prioritized flavor of __constructor__ functions
run last, and the canary is generally not expected to change as of this
point at the very least.
This took approximately three weeks of spare time debugging to pin down.
PR: 241905
.jcr still needs a 0-entry added in crtend, even on !HAVE_CTORS archs, as
we're still getting .jcr sections added -- presumably due to the reference
in crtbegin. Without this terminal, the .jcr section (without data) overlaps
with the next section and register_classes in crtbegin will be examining the
wrong item.
PR: 241439
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D22132
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
- move from "oxtradoc" to RST/Sphinx documentation
- new "csv" encoder, which allows path and leaf lists
- address warnings from PVS-Stdio tool
- add "xolint" detected errors to the documentation
GCC's libgcc exports a few ARM-specific symbols for ARM EABI, AEABI, or
EHABI or whatever it's called. Export the same ones from LLVM-libunwind's
libgcc_s, on ARM. As part of this, convert libgcc_s from a direct
Version.map to one constructed from component Symbol.map files. This allows
the ARM-specific Symbol.map to be included only on ARM.
Fix ARM-only oddities in struct name/aliases in LLVM-libunwind to match
non-ARM definitions and ARM-specific expectations in libcxxrt /
libcompiler_rt.
No functional change intended for non-ARM architectures.
This commit does not actually flip the switch for ARM defaults from libgcc
to llvm-libunwind, but makes it possible (to compile, anyway).
Even though clang comes with a number of internal CUDA wrapper headers,
compiling sample CUDA programs will result in errors similar to:
In file included from <built-in>:1:
In file included from /usr/lib/clang/9.0.0/include/__clang_cuda_runtime_wrapper.h:204:
/usr/home/arr/cuda/var/cuda-repo-10-0-local-10.0.130-410.48/usr/local/cuda-10.0//include/crt/math_functions.hpp:2910:7: error: no matching function for call to '__isnan'
if (__isnan(a)) {
^~~~~~~
/usr/lib/clang/9.0.0/include/__clang_cuda_device_functions.h:460:16: note: candidate function not viable: call to __device__ function from __host__ function
__DEVICE__ int __isnan(double __a) { return __nv_isnand(__a); }
^
CUDA expects __isnan() and __isnanf() declarations to be available,
which are glibc specific extensions, equivalent to the regular isnan()
and isnanf().
To provide these, define __isnan() and __isnanf() as aliases of the
already existing static inline functions __inline_isnan() and
__inline_isnanf() from math.h.
Reported by: arrowd
PR: 241550
MFC after: 1 week
It turns out that a test of backtrace symbol resolution and formatting
requires symbols. Another option mightt be building with -rdynamic instead,
but this works for now.
Re-enabled skipped CI test, as it should now pass.
PR: 241562
Submitted by: lwhsu
Reported by: lwhsu
X-MFC-With: r354126, r354135, r354144
Drop portions that are unlit or redundant with llvm-libunwind: builtin.c,
unwind.h, and unwind_arm_ehabi_stub.c.
This code should now work with -fPIE binaries, should we choose to build any
that way.
When backtrace() array is full, signal an error so the underlying
Itanium-style C++ exception handling library (llvm-libunwind) knows to stop
tracing instead of continuing. (It should stop on its own when it finishes
unwinding, so this is mostly an extra seatbelt against an infinite loop bug
in the unwinder.)
For EFI at least, we can seed the environment
with VE_VERBOSE etc.
Reviewed by: stevek imp
Sponsored by: Juniper Networks
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22135
operation & ~limit where limit is a bool is clearly not what was intended,
given the line prior. Correct it to use the calculated mask for validation.
The cap_sysctl tests should now be functional again.
Imported BE, much like the activated BE, will not have an origin that we can
fetch/examine for destruction. be_destroy should not return BE_ERR_NOORIGIN
for failure to get the origin property for BE_DESTROY_AUTOORIGIN, because
we don't really know going into it that there's even an origin to be
destroyed.
BE_DESTROY_NEEDORIGIN has been renamed to BE_DESTROY_WANTORIGIN because only
a subset of it *needs* the origin, so 'need' is too strong of verbiage.
This was caught by jenkins and the bectl tests, but kevans failed to run the
bectl tests prior to commit.
Reported by: lwhsu
New BEs can be created from either an existing snapshot or an existing BE.
If an existing BE is chosen (either implicitly via 'bectl create' or
explicitly via 'bectl create -e foo bar', for instance), then bectl will
create a snapshot of the current BE or "foo" with be_snapshot, with a name
formatted like: strftime("%F-%T") and a serial added to it.
This commit adds the needed bits for libbe or consumers to determine if a
snapshot names matches one of these auto-created snapshots (with some light
validation of the date/time/serial), and also a be_destroy flag to specify
that the origin should be automatically destroyed if possible.
A future commit to bectl will specify BE_DESTROY_AUTOORIGIN by default so we
clean up the origin in the most common case, non-user-managed snapshots.
Summary:
This forces applications linked with lib CSU to have a .got, fixing binaries
linked with LLD9 after secure-plt was enabled on FreeBSD.
Submitted by: Alfredo Dal'Ava Junior (alfredo.junior_eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D21476
Compiling with clang gives a loss-of-alignment error due the cast to
uint8_t *. Since the TLS is always tcb aligned and TP_OFFSET is defined
as sizeof(struct tcb) we can guarantee there is no misalignment. Silence
the error by moving the offset into the inline assembly.
Reviewed by: br
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21926
Clang from trunk recently added a warning for when implicit int-to-float
conversions cause a loss of precision. The code in question is designed
to be able to handle that, so add explicit casts to silence this.
Submitted by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: dim
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21913
This warning (comparing a pointer against a zero character literal
rather than NULL) has existed since GCC 7.1.0, and was recently added to
Clang trunk.
Almost all of these are harmless, except for fwcontrol's str2node, which
needs to both guard against dereferencing a NULL pointer (though in
practice it appears none of the callers will ever pass one in), as well
as ensure it doesn't parse the empty string as node 0 due to strtol's
awkward interface.
Submitted by: James Clarke <jtrc27@jrtc27.com>
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21914
This provides a framework to define a template describing
a set of "variables of interest" and the intended way for
the framework to maintain them (for example the maximum, sum,
t-digest, or a combination thereof). Afterwards the user
code feeds in the raw data, and the framework maintains
these variables inside a user-provided, opaque stats blobs.
The framework also provides a way to selectively extract the
stats from the blobs. The stats(3) framework can be used in
both userspace and the kernel.
See the stats(3) manual page for details.
This will be used by the upcoming TCP statistics gathering code,
https://reviews.freebsd.org/D20655.
The stats(3) framework is disabled by default for now, except
in the NOTES kernel (for QA); it is expected to be enabled
in amd64 GENERIC after a cool down period.
Reviewed by: sef (earlier version)
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20477
Diff partially stolen from CheriBSD; these bits need -Wl,-z,notext in order
to build in an LLVM world. They are needed for all flavors/sizes of MIPS.
This will eventually get fixed in LLVM, but it's unclear when.
Reported by: arichardson, emaste
Differential Revision: https://reviews.freebsd.org/D21696
The debug level generally just controls verbosity of libusb for debugging
libusb devices/usage. We allow the environment to set the debug level
independent of the application, but the application will always override
this if it explicitly sets the debug level.
Changing the environment is easy, but patching the software to change the
debug level isn't necessarily easy or possible. Further, there's this
write-only debug_fixed variable that would seem to imply that the debug
level should be fixed, but it isn't currently used. Change the logic to use
strtol() so we can detect real 0 vs. conversion failure, then honor
debug_fixed in libusb_set_debug.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21877
While FreeBSD's implementation of these expect an int inside of libc, that's an
implementation detail that we can hide from the user as it's the natural
promotion of the current mode_t type and before it is used in the kernel, it's
converted back to the narrower type that's the current definition of mode_t. As
such, documenting int is at best confusing and at worst misleading. Instead add
a note that these args are variadic and as such calling conventions may differ
from non-variadic arguments.
promoted to ints).
- `mode_t` is `uint16_t` (`sys/sys/_types.h`)
- `openat` takes variadic args
- variadic args cannot be 16-bit, and indeed the code uses int
- the manpage currently kinda implies the argument is 16-bit by saying `mode_t`
Prompted by Rust things: https://github.com/tailhook/openat/issues/21
Submitted by: Greg V at unrelenting
Differential Revision: https://reviews.freebsd.org/D21816
Summary: When powerpc64 switches to LLVM, use this patch to enable
OpenMP as well. OpenMP on PPC is only for 64-bits, so don't make a
32-bit libomp. A change to openmp files is necesssary (under review on
https://reviews.llvm.org/D67190), because it determines ELF format
version based on endianness, which is incorrect.
Reviewed by: alfredo.junior_eldorado.org.br, #manpages
Differential Revision: https://reviews.freebsd.org/D21532
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
Described in [1], signal handlers running in a vfork child have
opportunities to corrupt the parent's state. Address this by adding a new
rfork(2) flag, RFSPAWN, that has vfork(2) semantics but also resets signal
handlers in the child during creation.
x86 uses rfork_thread(3) instead of a direct rfork(2) because rfork with
RFMEM/RFSPAWN cannot work when the return address is stored on the stack --
further information about this problem is described under RFMEM in the
rfork(2) man page.
Addressing this has been identified as a prerequisite to using posix_spawn
in subprocess on FreeBSD [2].
[1] https://ewontfix.com/7/
[2] https://bugs.python.org/issue35823
Reviewed by: jilles, kib
Differential Revision: https://reviews.freebsd.org/D19058
When RFSPAWN is passed, rfork exhibits vfork(2) semantics but also resets
signal handlers in the child during creation to avoid a point of corruption
of parent state from the child.
This flag will be used by posix_spawn(3) to handle potential signal issues.
Reviewed by: jilles, kib
Differential Revision: https://reviews.freebsd.org/D19058
C/C++) in exp(3), expf(3), expm1(3) and expm1f(3) during intermediate
computations that compute the IEEE-754 bit pattern for |2**k| for
integer |k|.
The implementations of exp(3), expf(3), expm1(3) and expm1f(3) need to
compute IEEE-754 bit patterns for 2**k in certain places. (k is an
integer and 2**k is exactly representable in IEEE-754.)
Currently they do things like 0x3FF0'0000+(k<<20), which is to say they
take the bit pattern representing 1 and then add directly to the
exponent field to get the desired power of two. This is fine when k is
non-negative.
But when k<0 (and certain classes of input trigger this), this
left-shifts a negative number -- an operation with undefined behavior in
C and C++.
The desired semantics can be achieved by instead adding the
possibly-negative k to the IEEE-754 exponent bias to get the desired
exponent field, _then_ shifting that into its proper overall position.
(Note that in case of s_expm1.c and s_expm1f.c, there are SET_HIGH_WORD
and SET_FLOAT_WORD uses further down in each of these files that perform
shift operations involving k, but by these points k's range has been
restricted to 2 < k <= 56, and the shift operations under those
circumstances can't do anything that would be UB.)
Submitted by: Jeff Walden, https://github.com/jswalden
Obtained from: https://github.com/freebsd/freebsd/pull/411
Obtained from: https://github.com/freebsd/freebsd/pull/412
MFC after: 3 days
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
bde reports (in a reply to r351700 commit mail):
This uses scasb, which was last optimal on the 8086, or perhaps the
original i386. On freefall, it is several times slower than the
naive translation of the naive C code.
Reported by: bde
Reviewed by: kib, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21785
