The condition can be hit with simple user input, so it isn't an invariant.
Just error out.
PR: 217003
Reported by: Vladislav V. Prodan <admin at support.od.ua>
Sponsored by: Dell EMC Isilon
From NetBSD christos Sat Jan 26 00:19:39 2013 +0000
make the buffer functions look exactly like the kernel ones and add other
cruft to make the kernel files compile.
ffs.c 1.54
ffs/buf.c 1.13
ffs/buf.h 1.3
ffs/ffs_alloc.c 1.21
ffs/ffs_balloc.c 1.15
Reviewed by: marcel, ngie
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8404
ld.bfd generates two PT_LOAD segments, but certain linkers or linker
configurations generate three PT_LOAD segments (one additional for
RELRO).
PR: 216975
Reported by: Shawn Webb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
* 'blackhole' and 'reject' are mutually exclusive, replace printf() by errx()
when both are selected.
* 'trail' option is no longer supported since first import of arp from 4.4BSD.
XXX message was added 13 years ago in r128192. I believe it's time to remove
it.
* Use warnx() to print some informative messages instead of printf()
* Replace strncmp() by strcmp() when validating parameters and exit when invalid
parameter is found
Reviewed by: allanjude, vangyzen, cem
Approved by: allanjude
MFC after: 1 week
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D9504
* DISTDIR_IS_UNIONFS is set every time BSDINSTALL_DISTDIR is mounted inside
BSDINSTALL_CHROOT. Use this flag to decide if it needs to be umounted
* BSDINSTALL_CHROOT/dev is mounted when 'bsdinstall mount' is called, there is
no need to mount it again when user goes to shell after installation
Reviewed by: allanjude
Obtained from: pfSense
MFC after: 1 week
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D8573
This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
If "capacity" LU option is set, ramdisk backend now implements featured
thin provisioned disk, storing data in malloc(9) allocated memory blocks
of pblocksize bytes (default PAGE_SIZE or 4KB). Additionally ~0.2% of LU
size is used for indirection tree (bigger pblocksize reduce the overhead).
Backend supports all unmap and anchor operations. If configured capacity
is overflowed, proper error conditions are reported.
If "capacity" LU option is not set, the backend operates mostly the same
as before without allocating real storage: writes go to nowhere, reads
return zeroes, reporting that all LBAs are unmapped.
This backend is still mostly oriented on testing and benchmarking (it is
still a volatile RAM disk), but now it should allow to run real FS tests,
not only simple dumb dd.
MFC after: 2 weeks
CID 1341620 Fix a small memory leak
CID 1341630 Though this is technically a false positive, rearrange the
code for clarity.
CID 1341635 Eliminate dead code
CID 1368663 Fix a double mutex unlock in the error path
Also:
* Use sig_atomic_t for variables accessed from signal handlers
* Don't conditionalize free(3) on its argument being non-null
Reported by: Coverity
CID: 1341620 1341630 1341635 1368663
Reviewed by: ken
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9237
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Connection parameters should remain at defaults until negotiated.
While there, remove sythetic limits, applied if kernel provided none.
iscsid has no own limitations, no configuration and no any idea what
values are good. Assume kernel knows what it requests.
If initiator does not negotiate some parameter, it expects one to get
default value, not some unknown remote hardware limit. On the side side,
if some parameter is negotiated, its default value from RFC should not
be used for anything.
- Only #include tcpd.h when LIBWRAP is true to avoid header include errors
- Only define whichaf when LIBWRAP is true to avoid -Wunused warning and
to avoid issues with structs being defined that should only be defined
when tcpd.h is included.
MFC after: 2 weeks
X-MFC with: r312105
Pointyhat to: ngie
Reported by: gcc tinderbox
Sponsored by: Dell EMC Isilon
This will allow inetd to stand by itself without libwrap.
MFC after: 2 weeks
Relnotes: yes
Reviewed by: hrs (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9056
case was the full disk image from the website, which was never
checked in to svn)
Regardless, the testcase still fails
PR: 214908
Sponsored by: Dell EMC Isilon
Disk image obtained from:
http://www.cfreds.nist.gov/dfr-images/dfr-01-xfat.dd.bz2 -- was ripped off the
first GPT partition and verified to be a FAT-like partition with file(1)/hexdump.
This testcase currently fails
PR: 214908
Sponsored by: Dell EMC Isilon
The variables in question are actually return arguments, but it's still good
form to initialize them.
Reported by: Coverity
CID: 979679 979680
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Reallow device selectors to have a trailing colon, as documented in the
manual page. This was broken along with some unrelated cleanups in
r295806.
PR: 215979
Reported by: David Boyd <David.Boyd49 at twc.com>
Sponsored by: Dell EMC Isilon
Fix a clang 4.0.0 warning about taking the address of a packed member of
struct mfi_evt in mfiutil:
usr.sbin/mfiutil/mfi_evt.c:583:30: error: taking address of packed
member 'members' of class or structure 'mfi_evt' may result in an
unaligned pointer value [-Werror,-Waddress-of-packed-member]
if (parse_locale(optarg, &filter.members.locale) < 0) {
^~~~~~~~~~~~~~~~~~~~~
Use a local variable instead, and copy that into the struct.
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9069
This change also documents the modification harti made to a handful of
objects in r122758 (the max OCTET STRING width was increased from 15 to
31 octets)
MFC after: 1 week
- Mark the smilint target .PHONY so it's always executed when requested
- Leverage .PATH for BMIBS instead of spelling the path out longhand
for them
MFC after: 1 week
This prevented the device from attaching with a
Windows guest (most other guests use the device type
for matching)
PR: 212711
Submitted by: jbeich
MFC after: 3 days
in the first byte of the 3-byte mouse data report.
Plan9/9front requires this.
Switch over to using #defines for the data report bits.
Verified no regression on Win10/Fedora-live.
Reported and tested by: Trent Thompson (trentnthompson at gmail com)
MFC after: 1 week
This is being done to reduce wasted space, simplify complexity in
the code, and to quell a Coverity warning about buffer overruns.
warning about buffer overruns.
MFC after: 1 week
Reported by: Coverity
CID: 1006736
* CID 1198994: Don't run the speed disk on a disk with no sectors
* CID 1011442: Don't call close(2) if open(2) fails
* CID 1011161: Use snprintf instead of sprintf
* CID 1009825: Check the return value of lseek
Reported by: Coverity
CID: 1198994 1011442 1011161 1009825
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Although it increases the size of the bsnmp{get,set,walk} binaries by
four on my [amd64] system, it removes the need for producing .debug
files, profiled libraries, and for installing the library itself,
reducing the overall size use on disk by the utilities noted
previously.
Plus, it guards against ABI/API compatibility issues with the library
as it's only used internal to the tools themselves.
MFC after: 3 weeks
- snmp_pdu_free should be called before snmp_pdu_create is called
again
- snmp_pdu_free should be called on the resp to snmp_dialog when
successful
Tested with the following bsnmp commands:
% export SNMPUSER=bsnmp SNMPPASSWD=bsnmptest
% SNMP_ARGS="-A proto=sha -C context='' -K -P proto=des -v 3 -r 0"
% bsnmpset $SNMP_ARGS sysLocation="MyAgent"
% bsnmpget $SNMP_ARGS sysLocation
% bsnmpwalk $SNMP_ARGS
MFC after: 12 days
X-MFC with: r310729, r310892, r310894
on the stack
Some of the callers try to determine whether or not `object` is valid by
testing the value for NULL, which will never be true if it's a stack value,
so in order to be clear and correct down the call stack, use a heap
allocated object.
This also addresses a Coverity issue by initializing all of `object` via
calloc
MFC after: 1 week
Reported by: Coverity
CID: 1006392
- Set O_CLOEXEC to the signal pipe and /dev/klog.
- Use a single signal handler to catch both SIGHUP and SIGCHLD.
- Fix a bug which did FD_SET() the writer-end of the pipe.
The previous code always set value->v.octetstring.len to len, regardless
of the result from the malloc call. This misleads the caller on malloc
failure. Set .len to len on success and 0 on failure.
MFC after: 1 week
Reported by: Coverity
CID: 1007590
r310892 was on the right track, but unfortunately it was resolving
the problem incorrectly and accidentally leaking memory in the
process.
- Call snmp_pdu_free on req before calling snmp_pdu_create on it
at the bottom of the outer while loop
- Call snmp_pdu_free on resp after calling snmpwalk_nextpdu_create
in the inner loop
MFC after: 12 days
X-MFC with: r310729, r310892
Reported by: valgrind
the main I/O multiplex loop. select() now watches
a pipe which is written by the new skinny signal
handlers and the received signals are handled inside
the loop sequencially.
This eliminates a complex signal mask to guarantee
async-signal safety.
Don't close all file descriptors greater than STDERR_FILENO (2) in
waitdaemon(..) -- only close fd (file descriptor for /dev/null used in
subsequent calls to dup2) if it's greater than STDERR_FILENO.
Reported by: subbsd@gmail.com, danny@cs.huji.ac.il
Pointyhat to: hrs
X-MFC with: r310494
- Use warn instead of warnx + strerror(errno)
- Remove unnecessary trailing newline from a warnx call
- Add missing spaces following "," in syslog and warn* calls
MFC after: 2 weeks
sending SIGTERM to the process failed. It is an
unusual situation but it can happen.
- Split deadq_remove() into deadq_remove() and
deadq_removebypid().
- Normalize variable names of struct deadq_entry *.
Now that we have our sysctl tree annotated with aggregation labels,
let's go ahead and provide a very simple utility for exporting the
sysctl tree in Prometheus' format. It can either be used in conjunction
with the Prometheus node exporter or run through inetd(8).
The reason why I'm opting for having it in the base system is because it
has a pretty strong integration with some of sysctl's innards, such as
access to iterators, name lookups, metadata and type information. As I
am investigating whether we can add histograms as native types to sysctl
as well, this integration will only get stronger as we go along. That's
why it would be safer to oversee the development of this exporter
ourselves, as opposed to having it as an external project.
This exporter is remarkably compact, especially when compared to the
official Linux binary of the Prometheus node exporter (16 KB vs 12 MB).
I guess this could be an interesting aspect for monitoring embedded
FreeBSD-based systems.
Differential Revision: https://reviews.freebsd.org/D8792
now processed in struct socklist in a consistent manner.
- Add helper functions to add a new entry of struct socklist, filed, or peer.
- Use the same routine for -l, -p, and -S.
- Close /dev/klog when read(2) failed.
Add a '-f' option to force crontab '-r' to be non-interactive.
Submitted by: Sam Gwydir <sam at samgwydir.com>
Reviewed by: me, wblock (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8815
process the range of country labels which appear as columnar list from the
"ifconfig DEV list countries" command. Not only improving maintainability,
but also properly encapsulating arguments in single-quotes instead of
trying to escape whitespace. It is also completely unnecessary to collapse
newlines into whitespace (shell will do this for you automatically upon
expansion of the contents where necessary).
NB: This also changes the sorting algorithm to sort on the country code,
not the country name. The type-ahead feature of dialog is destroyed if the
tags are not sorted properly.
Without quotes, $@ loses its special meanining (see below)
% sh -c 'echo $@' /bin/sh " 1 " " 2 "
1 2
% sh -c 'echo "$@"' /bin/sh " 1 " " 2 "
1 2
The quotes are required to get ARGV to be unperterped
now maintained in a single linked-list in a transport-independent manner.
- Use queue.h for linked-list structure.
- Use linked-list for AllowedPeers.
- Use getaddrinfo(8) even for Unix Domain sockets.
- Use macros to type-casting from/to struct sockaddr{,_in,_in6}.
- Define fu_* macro for union f_un to shorten the member names.
- Remove an extra #include <sys/type.h>.
- Add "static" to non-exported symbols.
- !INET support is still incomplete but will be fixed later.
There is no functional change except for some minor debug messages.
now maintained in a single linked-list in a transport-independent manner.
- Use queue.h for linked-list structure.
- Use linked-list for AllowedPeers.
- Use getaddrinfo(8) even for Unix Domain sockets.
- Use macros to type-casting from/to struct sockaddr{,_in,_in6}.
- Define fu_* macro for union f_un to shorten the member names.
- Remove an extra #include <sys/type.h>.
- Add "static" to non-exported symbols.
- !INET support is still incomplete but will be fixed later.
There is no functional change except for some minor debug messages.
server.
This patch uses the sysctl vfs.nfsd.server_min_nfsvers to determine
if/what versions of NFS service should be registered with rpcbind.
For NFSv4 only, it does not register at all, since NFSv4 always uses 2049
and does not require rpcbind.
For NFSv3 minimum, it registers NFSv3 but not NFSv2.
Tested by: jmader2@gmu.edu
Submitted by: jmader2@gmu.edu (earlier version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8696
The TCP server implementation in dbgport does not track clients, so it
may try to write to a disconected socket resulting in SIGPIPE.
Avoid that by setting SO_NOSIGPIPE socket option.
Because dbgport emulates an I/O port to guest, the communication is done
byte by byte. Reduce latency of the TCP/IP transfers by using
TCP_NODELAY option. In my tests that change improves performance of
kgdb commands with lots of output (e.g. info threads) by two orders of
magnitude.
A general note. Since we have a uart emulation in bhyve, that can be
used for the console and gdb access to guests. So, bvmconsole and bvmdebug
could be de-orbited now. But there are many existing deployments that
still dependend on those.
Discussed with: julian, jhb
MFC after: 2 weeks
Sponsored by: Panzura
writev() can do a short write. Retrying it results in a very convoluted
and complex code, so we iterate over iovec and do regular stream_write()
instead.
Approved by: trasz
Sponsored by: iXsystems, Inc.
r285050 fixed a bug in pw that could lead to /etc/passwd or /etc/group
corruption on power loss. However, it fixed it by opening those files with
O_SYNC, which is very slow, especially on ZFS. This change replaces O_SYNC
with appropriately placed fsync()s instead, which is much faster. Using a
ZFS tmpdir, the time to run pw's kyua tests drops from 245s to 35s.
Reviewed by: allanjude, bapt, vangyzen, garga
Tested on pfSense by: garga
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8319
Some tools produce objects with a combined strtab and shstrtab.
These objects are not supported by crunchide since it rewrites the
symtab and strtab to "hide" symbols. This invalidates section header
offsets into a combined strtab/shstrtab.
In the future we could support these objects (by ensuring that we retain
unmodified section name strings in the output .strtab, and then rewriting
each section header's sh_name).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
VSS stands for "Volume Shadow Copy Service". Unlike virtual machine
snapshot, it only takes snapshot for the virtual disks, so both
filesystem and applications have to aware of it, and cooperate the
whole VSS process.
This driver exposes two device files to the userland:
/dev/hv_fsvss_dev
Normally userland programs should _not_ mess with this device file.
It is currently used by the hv_vss_daemon(8), which freezes and
thaws the filesystem. NOTE: currently only UFS is supported, if
the system mounts _any_ other filesystems, the hv_vss_daemon(8)
will veto the VSS process.
If hv_vss_daemon(8) was disabled, then this device file must be
opened, and proper ioctls must be issued to keep the VSS working.
/dev/hv_appvss_dev
Userland application can opened this device file to receive the
VSS freeze notification, hold the VSS for a while (mainly to flush
application data to filesystem), release the VSS process, and
receive the VSS thaw notification i.e. applications can run again.
The VSS will still work, even if this device file is not opened.
However, only filesystem consistency is promised, if this device
file is not opened or is not operated properly.
hv_vss_daemon(8) is started by devd(8) by default. It can be disabled
by editting /etc/devd/hyperv.conf.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: kib, mckusick
MFC after: 3 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8224
Developers writing code for accessing /dev/smb may use this base utility
as an example. Now that SMB_READB, SMB_READW, SMB_PCALL behave as
documented, wwe can use them in a more convenient way than before.
MFC after: 4 weeks
X-MFC after: r308527
Used extensively on my network over the past month.
Reviewed by: pfg, brooks
Suggested by: pfg
Obtained from: ftp://ftp.am-utils.org/pub/am-utils/
MFC after: 6 weeks
Relnotes: yes
Differential Revision: D8405
The code assumed that 'timeout' and 'timeout_sec' are in sync
which they weren't if no '-t' option was passed to watchdogd.
Reported by: Olivier Smedts <olivier@gid0.org>,
Alex Deiter <alex.deiter@gmail.com>
Tested by: Olivier Smedts <olivier@gid0.org>,
Alex Deiter <alex.deiter@gmail.com>
MFC after: 5 days
X-MFC with: r308040
print. Also add a new flag -s that add blocks size to statistics.
PR: 198347, 212726
Submitted by: Ben RUBSON <ben.rubson@gmail.com>
Tested by: pi
MFC After: 2 weeks.
