Those who really need this information can find it in the include file.
* Include a succinct description of the st_birthtime field.
Approved by: re (bmah)
- hosts_ctl(3), hosts_access(3), request_init(3),
request_set(3).
PR: docs/52000
Submitted by: Simon L. Nielsen <simon@nitro.dk>
Approved and Reviewed by: des (mentor), re (scottl)
- strip out the nasty PIC_PROLOGUE/EPILOGUE stuff, since we dont have
to lose a register in PIC mode anymore (we use %rip-relative addressing).
- update for C register argument passing conventions.
- convert 32 bit to 64 bit register sizes etc.
Note that the syscall instruction clobbers %rcx, which is inconvenient
because it is the fourth syscall argument, so we use %r10 (another scratch
register) for the 4th syscall arg instead (I picked %r10 to be the same as
NetBSD). int 0x80 is still possible though, and it uses %rcx as usual.
Note that the syscall style syscall does *NOT* preserve all the registers,
unlike int 0x80. We do not preserve the scratch registers except for
%rdi and %rsi. int 0x80 does preserve everything but the return values.
technique) so that we don't wind up calling into an application's
version if the application defines them.
Inspired by: qpopper's interfering and buggy version of strlcpy
a thread lock).
Better protect access to thread state while searching for
threads to handle a signal.
Better protect access to process pending signals while processing
a thread in sigwait().
Submitted by: davidxu
KSEs when it's thread exits; allow the GC handler to do that.
o Make spinlock/spinlock critical regions.
The following were submitted by davidxu
o Alow thr_switch() to take a null mailbox argument.
o Better protect cancellation checks.
o Don't set KSE specific data when creating new KSEs; rely on the
first upcall of the KSE to set it.
o Add the ability to set the maximum concurrency level and do this
automatically. We should have a way to enable/disable this with
some sort of tunable because some applications may not want this
to be the default.
o Hold the scheduling lock across thread switch calls.
o If scheduling of a thread fails, make sure to remove it from the list
of active threads.
o Better protect accesses to a joining threads when the target thread is
exited and detached.
o Remove some macro definitions that are now provided by <sys/kse.h>.
o Don't leave the library in threaded mode if creation of the initial
KSE fails.
o Wakeup idle KSEs when there are threads ready to run.
o Maintain the number of threads active in the priority queue.
While I'm here, use the TAILQ_FOREACH macro instead of a more
manual method which was inherited from libc_r (so we could
remove elements from the list which isn't needed for libpthread).
Submitted by: Kazuaki Oda <kaakun@highway.ne.jp>
setgrent, and endgrent also. (The previous NSS implementation used to
simply twiddle the internal data of the various modules directly.)
A symptom (group list set incorrectly in sshd) was
Reported by: Glenn Johnson <gjohnson@srrc.ars.usda.gov>
Sponsored by: DARPA, Network Associates Laboratories
idea to re-initialize `struct passwd', because e.g. pw_class might
get set by one module, but not by another. Add another call to the
internal pwd_init function to accomplish this.
Sponsored by: DARPA, Network Associates Laboratories
password must necessarily have an empty pwd->pw_passwd. Also add a check
that prevents users from setting a blank password unless the nullok option
was specified. Root is still allowed to give anyone a blank password.
Correct a bug that should have wreaked havoc everywhere, but for
some reason only bit unlucky people who use `-march' optimizations.
The compiler cannot assist one in distinguishing between the two
function calls below.
int nsdispatch(void *, ...);
void *discard;
nsdispatch(&discard, ...); /* correct .. no, really! */
nsdispatch(discard, ...); /* Boom */
Robin provided me with a debugging environment in which I could see
what was going on.
Badness when using CPUTYPE was
Reported by: "Robin P. Blanchard" <Robin.Blanchard@gactr.uga.edu>
Reported by: nork
Sponsored by: DARPA, Network Associates Laboratories
provided by Sergey A. Osokin <osa@freebsd.org.ru>.
In order to test this on a single CPU machine, you need to:
sysctl kern.threads.debug=1
sysctl kern.threads.virtual_cpu=2
lock level is 0. Thus far, the threads implementation doesn't use
mutexes or condition variables so the lock level should be 0.
Save the return value when trying to schedule a new thread and
use this to return an error from pthread_create().
Change the max sleep time for an idle KSE to 1 minute from 2 minutes.
Maintain a count of the number of KSEs within a KSEG.
With these changes scope system threads seem to work, but heavy
use of them crash the kernel (supposedly VM bugs).
An incorrectly-sized allocation was being made due to an incorrect
argument to the `sizeof' operator. Obvious, because it violated the
`foo = malloc(sizeof(*foo))' idiom. Hard-to-see, because it was a
missing `*' (`*p' versus `**p').
Resulting failure was
Reported by: ache
Sponsored by: DARPA, Network Associates Laboratories
privileges. To do so may cause the NIS server to log spurious and
annoying `access denied' messages.
Reported by: Philip Paeps <philip@paeps.cx>
Sponsored by: DARPA, Network Associates Laboratories
to be instances where the kernel doesn't properly save and/or
restore it.
Use noupcall and nocompleted flags in the KSE mailbox. These
require kernel changes to work which will be committed sometime
later. Things still work without the changes.
Remove the general kse entry function and use two different
functions -- one for scope system threads and one for scope
process threads. The scope system function is not yet enabled
and we use the same function for all threads at the moment.
Keep a copy of the KSE stack for the case that a KSE runs
a scope system thread and uses the same stack as the thread
(no upcalls are generated, so a separate stack isn't needed).
This isn't enabled yet.
Use a separate field for the KSE waiting flag. It isn't
correct to use the mailbox flags field.
The following fixes were provided by David Xu:
o Initialize condition variable locks with thread versions
of the low-level locking functions instead of the kse versions.
o Enable threading before creating the first thread instead
of after.
o Don't enter critical regions when trying to malloc/free
or call functions that malloc/free.
o Take the scheduling lock when inheriting thread attributes.
o Check the attribute's stack pointer instead of the
attributes stack size for null when allocating a
thread's stack.
o Add a kseg reinit function so we don't have to destroy and
then recreate the same lock.
o Check the return value of kse_create() and return an
appropriate error if it fails.
o Don't forget to destroy a thread's locks when freeing it.
o Examine the correct flags word for checking to see if
a thread is in a synchronization queue.
Things should now work on an SMP kernel.
Note that the tp register (r13) is reserved as the TLS pointer in
the same way that that gp register (r1) is reserved as the global
pointer. This implementation uses the tp register to point to the
thread structure used by the threads implementation. This is not
in violation with the runtime specification provided the TLS is
a fixed distance from the thread structure. This is only an issue
when code used the __thread keyword to create TLS. This is not
supported at the moment.
in the mac.3 library man page. They were already cross-referenced
at the end of the man page, just not explicitly listed here.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
libthr. No changes were made to libpthread by request of deischen,
who will soon commit a real implementation for that library.
PR: standards/50848
Submitted by: Sergey A. Osokin <osa@freebsd.org.ru>
MFC after: 1 week
would result in an incorrectly terminated grouplist.
login(1) crashes
Reported by: Morten Rodal <morten@rodal.no>,
Matthias Schuendehuette <msch@snafu.de>
string was an incredibly dumb idea (of course it will be changed by an
NSS module on success!). Use a static empty string instead.
Sponsored by: DARPA, Network Associates Laboratories
may not fill in all fields, and in the case of string fields, this could
cause trouble for applications. (The only likely example is `pw_class',
because this field is not used by all modules in all cases.)
Move initialization of struct passwd from module-specific code to the
dispatch code.
The problem of a NULL pw_class was
Noticed by: Philip Paeps <philip@paeps.cx>
and the c^Htrusty ssh(1) command.
Déjà vu by: getpwent.c revision 1.56
Sponsored by: DARPA, Network Associates Laboratories
at least one consumer outside of libc and pwd_mkdb.
Adjust the versioning in libc and pwd_mkdb accordingly.
named was the application affected, and that fact was first
Reported by: Zherdev Anatoly <tolyar@mx.ru>
Sponsored by: DARPA, Network Associates Laboratories
environment. This includes support for multiple KSEs and KSEGs.
The ability to create more than 1 KSE via pthread_setconcurrency()
is in the works as well as support for PTHREAD_SCOPE_SYSTEM threads.
Those should come shortly.
There are still some known issues which davidxu and I are working
on, but it'll make it easier for us by committing what we have.
This library now passes all of the ACE tests that libc_r passes
with the exception of one. It also seems to work OK with KDE
including konqueror, kwrite, etc. I haven't been able to get
mozilla to run due to lack of java plugin, so I'd be interested
to see how it works with that.
Reviewed by: davidxu
family of functions using the new nsdispatch(3) core. Remove
arbitrary size limits when using the thread-safe versions.
= Re-implement the traditional getpwent(3)/getgrent(3) functions on
top of the thread-safe versions.
= Update the on-disk format of the hashed version of the passwd(5)
databases to allow for versioned entries. The legacy version is
`3'. (Don't ask.)
= Add support for version `4' entries in the passwd(5) database.
Entries in this format are identical to version 3 entries except
that all integers are stored as 32-bit integers in network byte
order (big endian).
= pwd_mkdb is updated to generate both version 3 and version 4
entries.
Sponsored by: DARPA, Network Associates Laboratories
may be built into libc (`static NSS modules') or dynamically loaded
via dlopen (`dynamic NSS modules'). Modules are loaded/initialized
at configuration time (i.e. when nsdispatch is called and nsswitch.conf
is read or re-read).
= Make the nsdispatch(3) core thread-safe.
= New status code for nsdispatch(3) `NS_RETURN', currently used to
signal ERANGE-type issues.
= syslog(3) problems, don't warn/err/abort.
= Try harder to avoid namespace pollution.
= Implement some shims to assist in porting NSS modules written for
the GNU C Library nsswitch interface.
Sponsored by: DARPA, Network Associates Laboratories
they resemble one another, but POSIX.1e interfaces were not sufficiently
expressive to do what we needed.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
%f and sufficiently short %g specifiers where the precision was
explicitly zero, no '#' flag was specified, and the floating point
argument was > 0 and <= 0.5. While at it, add some comments to better
explain the relevant bits of code.
Noticed by: Christoph Kukulies <kuku@physik.rwth-aachen.de>
or the tty, just block selected signals in the parent like system(3) does.
Many thanks to bde for his assistance in finding the correct solution.
PR: bin/50679
by allprison_mtx), a unique prison/jail identifier field, two path
fields (pr_path for reporting and pr_root vnode instance) to store
the chroot() point of each jail.
o Add jail_attach(2) to allow a process to bind to an existing jail.
o Add change_root() to perform the chroot operation on a specified
vnode.
o Generalize change_dir() to accept a vnode, and move namei() calls
to callers of change_dir().
o Add a new sysctl (security.jail.list) which is a group of
struct xprison instances that represent a snapshot of active jails.
Reviewed by: rwatson, tjr
- Bump shared library version on libusbhid.
- Retire libusbhid.h; it is called usbhid.h now.
- hid_start_parse() takes a third argument.
- hid_locate() takes a fifth argument.
- hid_report_size() order of arguments changes.
- Other changes, including formatting and whitespace.
Bump __FreeBSD_version.
This change will break all third party applications that rely on previous
FreeBSD specific behavior.
proper way to fix this. The way this works is to prepend "exec " to
the editor command to eliminate the "shell in the middle" which prevents
us from properly reawakening the editor after a SIGTSTP.
PR: bin/50679
- Reduce diffs with NetBSD.
- Formatting and explicit values for enum declaration.
- Order of prototypes.
- zero report_size in hid_clear_local()
- errx() needs no newline
- Don't initialie variable in declaration in hid_parse_usage_in_page().
- Use fmtcheck() in hid_usage_in_page().
be printed.
- Fix %f conversions where the number of significant digits is < expt.
This would be a one-line change were it not for thousands separators.
Noticed by tjr.
- Remove some unnecessary code in the parsing of precision specifiers.
- We used to round long double arguments to double. Now we print
them properly.
- Bugs involving '%F', corner cases of '#' and 'g' format
specifiers, and the '.*' precision specifier have been
fixed.
- Added support for the "'" specifier to print thousands' grouping
characters in a locale-dependent manner.
- Implement the __vfprintf() side of hexadecimal floating point
support. All that is still needed is a routine to convert the
mantissa to hex digits one nibble at a time in the style of ultoa().
Reviewed by: silence on standards@
- __vfprintf()'s 'buf' has never been used for floating point, so
don't define it in terms of (incorrect) constants describing
floating point numbers. The actual size needed depends on
sizeof(uintmax_t) and locale details, so I slightly overestimated.
- We don't need a 308-character buffer to store the string "308".
With long doubles and %a we need more than three characters, though.
FreeBSD. This method attempts to centralize all the necessary hacks
or work arounds in one of two places in the tree (src/Makefile.inc1
and src/tools/build). We build a small compatibility library
(libbuild.a) as well as selectively installing necessary include
files. We then include this directory when building host binaries.
This removes all the past release compatibilty hacks from various
places in the tree. We still build on tip of stable and current. I
will work with those that want to support more, although I anticipate
it will just work.
Many thanks to ru@, obrien@ and jhb@ for providing valuable input at
various stage of implementation, as well as for working together to
positively effect a change for the better.
strange things might happen when garbage values in the struct
get passed in to localtime_r() and family.
Noticed by: marcus
Approved by: markm (mentor)(implicit)
Move the remaining bits of <sys/diskslice.h> to <i386/include/bootinfo.h>
Move i386/pc98 specific bits from <sys/reboot.h> to
<i386/include/bootinfo.h> as well.
Adjust includes in sys/boot accordingly.
as curthread in the new context, so that it will be set automatically when
the thread is switched to. This fixes a race where we'd run for a little
while with curthread unset in _thread_start.
Reviewed by: jeff
_get_curthread(). This is similar to the kernel's curthread. Doing
this saves stack overhead and is more convenient to the programmer.
- Pass the pointer to the newly created thread to _thread_init().
- Remove _get_curthread_slow().
This was changed because originally we were blocking on the umtx and
allowing the kernel to do the queueing. It was decided that the
lib should queue and start the threads in the order it decides and the
umtx code would just be used like spinlocks.
critical and should not be killed when pageout is looking for more
memory pages in all the wrong places.
Reviewed by: arch@
Sponsored by: St. Bernard Software
from strptime(3). Previously, they would get filled only
for the %s specifier and as a side effect of using the
the %Z specifier with a GMT time zone.
PR: misc/48993
Approved by: markm (mentor)
Silence on: -standards
new one, and do not fall back to the RO fd. There was a bug here
in that the RO fd was never closed, if the RDRW open succeeded, but
this code is bogus anyway, and it breaks newfs of floppies, at least
for me, due to "Device busy." Anything that wants to fall back is
doing something significantly odd that it should have some more complex
code on its end.
more complicated things than just setting the lock to 0.
- Implement stubs for this function in libc and the two threading libraries
that are currently in the tree.
by NIS work, like nsswitch.conf(5) promises to be able to.
(These modifications will be fed back to NetBSD, of course)
- In endusershell(), do not set `sl' to NULL if we know it already has
that value.
a couple of reqests: DSM_BUSY_PCT and DSM_QUEUE_LENGTH.
I have no further plans for mutilating this API at this point in
time, and will update the man-page to reflect current reality as
the next thing.
Reviewed by: ken
Kernel:
Change statistics to use the *uptime() timescale (ie: relative to
boottime) rather than the UTC aligned timescale. This makes the
device statistics code oblivious to clock steps.
Change timestamps to bintime format, they are cheaper.
Remove the "busy_count", and replace it with two counter fields:
"start_count" and "end_count", which are updated in the down and
up paths respectively. This removes the locking constraint on
devstat.
Add a timestamp argument to devstat_start_transaction(), this will
normally be a timestamp set by the *_bio() function in bp->bio_t0.
Use this field to calculate duration of I/O operations.
Add two timestamp arguments to devstat_end_transaction(), one is
the current time, a NULL pointer means "take timestamp yourself",
the other is the timestamp of when this transaction started (see
above).
Change calculation of busy_time to operate on "the salami principle":
Only when we are idle, which we can determine by the start+end
counts being identical, do we update the "busy_from" field in the
down path. In the up path we accumulate the timeslice in busy_time
and update busy_from.
Change the byte_* and num_* fields into two arrays: bytes[] and
operations[].
Userland:
Change the misleading "busy_time" name to be called "snap_time" and
make the time long double since that is what most users need anyway,
fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same
timescale as the kernel fields.
Change devstat_compute_etime() to operate on struct bintime.
Remove the version 2 legacy interface: the change to bintime makes
compatibility far too expensive.
Fix a bug in systat's "vm" page where boot relative busy times would
be bogus.
Bump __FreeBSD_version to 500107
Review & Collaboration by: ken
dtoa() is buggy. The bug would cause incorrect output to be
generated when format strings such as '%5.0f' were used with
nonzero numbers whose magnitude is less than 1.
Reported by: df(1) by way of periodic(8)
Reviewed by: mike
amount of bytes (supposed to be) written by vsnprintf exceeds the
size of the buffer.
PR: bin/48844
Submitted by: Peter A Jonsson <pj@ludd.luth.se>
Obtained from: OpenBSD
MFC after: 1 month
package, a more recent, generalized set of routines. Among the
changes:
- Declare strtof() and strtold() in stdlib.h.
- Add glue to libc to support these routines for all kinds
of ``long double''.
- Update printf() to reflect the fact that dtoa works slightly
differently now.
As soon as I see that nothing has blown up, I will kill
src/lib/libc/stdlib/strtod.c. Soon printf() will be able
to use the new routines to output long doubles without loss
of precision, but numerous bugs in the existing code must
be addressed first.
Reviewed by: bde (briefly), mike (mentor), obrien
