Raspberry Pi are all over the board, and the reality is that there's no harm
in including all of the definitions by default but plenty of harm in the
current situation. This change is safe because we match a definition by root
/compatible in the FDT, so there will be no false-positives because of it.
The main array of definitions grows, but it's only walked exactly once to
determine which we need to use.
Previously, this check was only in sys_sigreturn() which meant that
user applications could write invalid values to the register via
setcontext() or swapcontext().
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23219
arm64 and riscv were only saving and restoring floating point
registers for sendsig() and sys_sigreturn(), but not for getcontext(),
setcontext(), and swapcontext().
While here, remove an always-false check for uap being NULL from
sys_sigreturn().
Reviewed by: br, mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23218
As part of the RISC-V ABI, the gp register is expected to initialized
with the address of __global_pointer$ as early as possible. This allows
loads and stores from .sdata to be relaxed based on the value of gp. In
locore.S we do this initialization twice, once each for va and mpva.
However, in both cases the initialization is preceded by an la
instruction, which in theory could be relaxed by the linker.
Move the initialization of gp to be slightly earlier (before la
cpu_exception_handler), and add an additional gp initialization at the
very beginning of _start, before virtual memory is set up.
Reported by: jrtc27
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D23139
as these functions should do zero-extend.
Discovered by running pci_read_cap(), and by hint from James Clarke.
Reviewed by: James Clarke <jrtc27@jrtc27.com>
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23236
Prior to introduction of this op libc's readdir would call fstatfs(2), in
effect unnecessarily copying kilobytes of data just to check fs name and a
mount flag.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D23162
page that was previously mapped read-only it exists in pmap until pmap_enter()
returns. However, we held no reference to the original page after the copy
was complete. This allowed vm_object_scan_all_shadowed() to collapse an
object that still had pages mapped. To resolve this, add another page pointer
to the faultstate so we can keep the page xbusy until we're done with
pmap_enter(). Handle busy pages in scan_all_shadowed. This is already done
in vm_object_collapse_scan().
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23155
Only send a speedup when there's a shortage. While this is a little racy, lost
races aren't a big deal for this function. If there's a shorage just popping up
after we check these values, then we'll catch it next time. If there's a
shortage that's just clearing up, we may do some work at the lower layers a
little sooner than we otherwise would have. Sicne shortages are relatively rare
events, both races are acceptable.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23182
It turns out there's a problem with using g_io to send the speedup. It leads to
a race when there's a resource shortage when a disk fails.
Instead, send BIO_SPEEDUP via struct buf. This is pretty straight forward,
except we need to transfer the bio_flags from b_ioflags for BIO_SPEEDUP commands
in g_vfs_strategy.
Reviewed by: kirk, chs
Differential Revision: https://reviews.freebsd.org/D23117
While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183
The vnode list lock is only needed to reclaim free vnodes or kick the vnlru
thread (or to block and not miss a wake up (but note the sleep has a timeout so
this would not be a correctness issue)). Try to get away without the lock by
just doing an atomic increment.
The lock is contended e.g., during poudriere -j 104 where about half of all
acquires come from vnode allocation code.
Note the entire scheme needs a rewrite, the above just reduces it's SMP impact.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23140
Semantics are almost identical. Some code is deduplicated and there are
fewer memory accesses.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D23158
The gpio controller in rockchips SoC in a child of the pinctrl driver
and cannot control pullups and pulldowns.
Use the new fdt_pinctrl interface for accessing pin capabilities and
setting them.
We can now report that every pins is capable of being IN or OUT function
and PULLUP PULLDOWN.
If the pin isn't in gpio mode no changes will be allowed.
Reviewed by: ganbold (previous version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22849
Most of the gpio controller cannot configure or get the configuration
of the pin muxing as it's usually handled in the pinctrl driver.
But they can know what is the pinmuxing driver either because they are
child of it or via the gpio-range property.
Add some new methods to fdt_pinctrl that a pin controller can implement.
Some methods are :
fdt_pinctrl_is_gpio: Use to know if the pin in the gpio mode
fdt_pinctrl_set_flags: Set the flags of the pin (pullup/pulldown etc ...)
fdt_pinctrl_get_flags: Get the flags of the pin (pullup/pulldown etc ...)
The defaults method returns EOPNOTSUPP.
Reviewed by: ian, bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23093
Some consumer cannot know the voltage of the regulator without it.
While here, refuse to attach is min_voltage != max_voltage, it
shouldn't happens anyway.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23003
The target-supply regulator is optional so don't fail if it's not present.
While here disable the clock on detach.
MFC after: 2 weeks
X-MFC-With: 356600
Each GPIO bank is powered by a different pin and so can be powered at different
voltage from different regulators.
Add a new config that now hold the pinmux data and the banks available on each
SoCs.
Since the aw_gpio driver being also the pinmux one it's attached before the PMIC
so add a config_intrhook_oneshot function that will enable the needed regulators
when the system is fully functional.
MFC after: 2 weeks
This method will set the desired voltaged based on values in the DTS.
It will not enable the regulator, this is the job of either a consumer
or regnode_set_constraint SYSINIT if the regulator is boot_on or always_on.
MFC after: 2 weeks
This enables virtio modules on PowerPC* target.
On PowerPC64, drivers are also kernel builtin.
QEMU currently needs to be patched to in order to work on LE hosts due to known
issue affecting pre-1.0 (legacy) virtio drivers.
The patch was submitted to QEMU mail list by @afscoelho_gmail.com, available at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg01496.html
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22833
Take advantage of global ordering introduced in r356672.
Reviewed by: mckusick (previous version)
Differential Revision: https://reviews.freebsd.org/D23067
ordering to allocate early pages in the same way boot pages were but only
as needed. After the KVA allocator has started up we allocate the KVA that
we consumed during boot. This also makes the boot pages freeable since they
have vm_page structures allocated with the rest of memory.
Parts of this patch were written and tested by markj.
Reviewed by: glebius, markj
Differential Revision: https://reviews.freebsd.org/D23102
mount point while numerous tests are running that are writing to
files on that mount point cause the unmount(8) to hang forever.
The unmount(8) system call is handled in the kernel by the dounmount()
function. The cause of the hang is that prior to dounmount() calling
VFS_UNMOUNT() it is calling VFS_SYNC(mp, MNT_WAIT). The MNT_WAIT
flag indicates that VFS_SYNC() should not return until all the dirty
buffers associated with the mount point have been written to disk.
Because user processes are allowed to continue writing and can do
so faster than the data can be written to disk, the call to VFS_SYNC()
can never finish.
Unlike VFS_SYNC(), the VFS_UNMOUNT() routine can suspend all processes
when they request to do a write thus having a finite number of dirty
buffers to write that cannot be expanded. There is no need to call
VFS_SYNC() before calling VFS_UNMOUNT(), because VFS_UNMOUNT() needs
to flush everything again anyway after suspending writes, to catch
anything that was dirtied between the VFS_SYNC() and writes being
suspended.
The fix is to simply remove the unnecessary call to VFS_SYNC() from
dounmount().
Reported by: Peter Holm
Analysis by: Chuck Silvers
Tested by: Peter Holm
MFC after: 7 days
Sponsored by: Netflix
The utility here seems somewhat limited, but clang will attempt to generate
.eh_frame and actively fail in doing so. It is perhaps worth investigating
why it's being generated in the first place (GCC doesn't do so), but this
isn't a high priority.
This can happen if a file is closed during unix socket GC. The same bug
was fixed for devfs descriptors in r228361.
PR: 242913
Reported and tested by: iz-rpi03@hs-karlsruhe.de
Reviewed by: hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23178
subsystems tend to need to know about it, and including if_var.h is
huge header pollution for them. Polluting possible non-network
users with single symbol seems much lesser evil.
- Remove non-preemptible network epoch. Not used yet, and unlikely
to get used in close future.
The only reason to vlazy there is to (overzealously) ensure all vnodes
which need to be visited by msync scan can be found there.
In particluar this is of no use zfs and tmpfs.
While here depessimize the check.
twice. Once to update the changed inodes, and a second time to update
changed quota information. This change merges these two scans into a
single scan which does both inode and quota updates.
MFC after: 7 days
