Commit Graph

4948 Commits

Author SHA1 Message Date
Mike Makonnen
553bf6a453 Rename the rc.conf(5) knob if_up_delay to defaultroute_delay to better
reflect its purpose.
2009-02-17 11:55:50 +00:00
Yoshihiro Takahashi
5a25eda53a sys/pccard is gone. 2009-02-15 11:05:50 +00:00
Ed Schouten
5ebad6a76a Remove pts(4) entries from /etc/ttys.
Even though I increased the amount of pts(4) entries in /etc/ttys some
time ago, I didn't realize back then those entries shouldn't have been
there in the first place.

I just looked at the getttyent() source code and it turns out when you
call setttyent(), it walks through /dev/pts and looks for the device
with the highest number. After you receive EOF's from getttyent(), it
makes up entries for pts(4) devices.

This means that adding entries for pts(4) is somewhat harmful, because
if you now traverse the list, you get redundant entries, so just remove
them.
2009-02-12 19:21:48 +00:00
Sam Leffler
1baa021ab6 turn off ttyv*; not aware of any arm-based systems with syscons
Reviewed by:	imp
2009-02-12 18:33:13 +00:00
Mike Makonnen
0dca64d80d Reword informational message by rc.d/defaultroute.
PR:		conf/131458
2009-02-11 09:18:09 +00:00
Bjoern A. Zeeb
507fe729a1 Named normally cannot be started chrooted inside a jail. Thus treat
the jail case specifically. In case we find a proper pre-seeded
devfs in the chroot path (mounted from the base system) permit
starting chrooted else give proper warn/error messages.

PR:		conf/103489
Reviewed by:	dougb
MFC after:	5 days
2009-02-07 16:37:02 +00:00
Andrew Thompson
c05bf25301 Check for NOAUTO on child interfaces (eg wlanX) so they can be created via
rc.conf but not necessarily started.
2009-02-04 18:20:27 +00:00
Mike Makonnen
b698a32036 Since, rc.d/defaultroute has the ability to wait for a
default route to show up we can turn this knob back on
without screwing subsequent daemons that expect to be
able to talk to the outside world.
2009-02-02 15:38:24 +00:00
Mike Makonnen
bdc0df86f6 The 30 second wait for network interfaces to show up effectively makes the
time to boot an unplugged system 30 sec. longer for no good reason. Therefore,
add a check to make sure that any DHCP interfaces are plugged in before
waiting.
2009-02-02 15:33:22 +00:00
Warner Losh
5dc2a65eed Spawn one fewer shells on startup. We don't use dhcp_interfaces at
all in this function, and grep shows no other instances of it
(besides, this is a function, and in a sub-shell, so all changes are
local).
2009-01-30 03:41:45 +00:00
Giorgos Keramidas
9bad6e2c6d Backout change 187782. It inhibits ntpd from starting at all
when ntpd_sync_on_start is set.

Noticed by:	rafan
2009-01-29 06:43:29 +00:00
Sam Leffler
c4506e0298 Remove gsm hacks now that we can do this "right":
o no need for special country codes; it's sufficient to use the sku
o no need to specify bands w/ 2.4G frequencies, use the real values
o remove duplicate band specs
2009-01-28 19:25:51 +00:00
Giorgos Keramidas
2ba7d35b21 When synchronizing the clock at system startup time, use both
the -g and -q options.  They do a slightly different thing and
both are necessary when the time difference is large.

Noticed by:	danger, in the forums
Approved by:	roberto
MFC after:	1 week
2009-01-27 20:13:24 +00:00
Sam Leffler
e3033defcc Remove DETACH event handling; this is race prone and does nothing useful.
Leave a comment for the next person that thinks they need to be helpful.

Reviewed by:	imp, jhb
MFC after:	2 weeks
2009-01-26 23:05:50 +00:00
Bjoern A. Zeeb
8154af81ff Update jail startup script for multi-IPv4/v6/no-IP jails.
Note: this is only really necessary because of the ifconfig
      logic to add/remove the jail IPs upon start/stop.
      Consensus among simon and I is that the logic should
      really be factored out from the startup script and put
      into a proper management solution.

- We now support starting of no-IP jails.
- Remove the global jail_<jname>_netmask option as it is only
  helpful to set netmasks/prefixes for the right address
  family and per address.
- Implement jail_<jname>_ip options to support both
  address familes with regard to ifconfig logic.
- Implement _multi<n> support suffix to the jail_<jname>_ip
  option to configure additional addresses to avoid overlong,
  unreadbale jail_<jname>_ip lines with lots of addresses.

Submitted by:	initial work from Ruben van Staveren
Discussed on:	freebsd-jail in Nov 2008.
Reviewed by:	simon, ru (partial, older version)
MFC after:	1 week
2009-01-26 12:59:11 +00:00
Bjoern A. Zeeb
7bc5585ecb Instead of killing the 'watchdog' subshell and leaving a sleep for
rcshutdown_timeout (normally 30s) around re-parented to init, make
sure both go away using pkill -P.

While noone normally notices this for the system shutdown, it helps for
cleanly shutting down trusted jails.
Found without a killall in the base system, which in rc.d/jail normally
ensures that all processes of a jail to be stopped will be killed.

Reviewed by:	silence on current@
MFC after:	4 weeks
2009-01-25 10:31:45 +00:00
Sam Leffler
971e1ffd1d revert r187343 2009-01-16 20:42:43 +00:00
Sam Leffler
bdb8f7ad51 add FCC4 SKU to expose Public Safety Band (PSB) frequencies; this is
modeled after the Atheros SKU of the same name
2009-01-16 20:40:50 +00:00
Hajimu UMEMOTO
620b9b80bc Fix typo to install 400.status-pkg, again. 2009-01-14 09:00:30 +00:00
Giorgos Keramidas
b9c076d3b3 The description of the various securelevels has moved to the
security.7 manpage a while ago.

MFC after:	1 week
2009-01-08 23:27:59 +00:00
Bjoern A. Zeeb
b9d8797efa Put the devfs ruleset next to devfs enable, add a comment about
the suggested ruleset[1].

While here use an IP from the 'test-net' prefix for docs.

PR:		kern/130102 ([1] different problem in the end)
Reviewed by:	simon
MFC after:	2 weeks
2009-01-06 22:18:24 +00:00
Andrew Thompson
8c2b8f8d49 Move another block of ASUS events to devd/asus.conf that were missed in r186249 2008-12-23 15:47:31 +00:00
Andrew Thompson
487f6bb895 Add /etc/devd/ and move hardware specific configuration there. This makes it
easier to maintain custom rules for non-system things like ACPI hotkeys.

/etc/devd.conf is already set up to check this directory, no change needed there.
2008-12-17 19:12:30 +00:00
Brooks Davis
956cfb324c Correct a bug where /etc/rc.d/defaultroute fails to finish by printing a
newline when it fails to obtain an address via DHCP. This made the next
rc script begin its output on the same line.

PR:		conf
Submitted by:	Bruce Cran <bruce at cran dot org dot uk>
MFC after:	3 days
2008-12-17 17:35:14 +00:00
Sam Leffler
8311334503 o fix DEBUG sku definition
o add definitions for 900MHz radios: Ubiquiti SR9 and XR9, and ZComax GZ-901
2008-12-15 01:18:11 +00:00
Ken Smith
dcaf4eb3ed Remove slip.log. Slip got removed as part of the MPSAFE tty work. If
it does come back it would probably be better if users who were interested
in slip added appropriate lines instead of this being here unconditionally.

Reminded by:	tut <at> nhamon <dot> com <dot> ua
2008-12-02 18:13:29 +00:00
Ken Smith
edadbb99db The slip.log file got removed along with the MPSAFE tty work. If slip
does ever come back it's probably best if its log file be something that
gets added if the user decided they want to run slip instead of having
it here unconditionally.
2008-12-02 16:46:01 +00:00
Alfred Perlstein
6f0e1ffd07 src/sys/dev/usb2/controller/uss820dci_pccard.c
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h

These files are not used any more.

src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist

Make "usbconfig" and "libusb20" a part of the default build.

src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c

Use common include file.

src/sys/dev/usb2/bluetooth/ng_ubt2.c

Make USB bluetooth depend on "ng_hci" module.

src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h

Patches for Marvell EHCI.

src/sys/dev/usb2/core/usb2_busdma.c

Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.

src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h

Bugfix for libusb filesystem interface.

New feature: Add support for filtering device data at the expense of the
userland process.

Add some more comments.

Some minor code styling.

Remove unused function, usb2_fifo_get_data_next().

Fix an issue about "fifo_index" being used instead of "ep_index".

src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c

Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.

Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.

src/sys/dev/usb2/core/usb2_hub.c

Improvement: Check all USB HUB ports by default at least one time.

src/sys/dev/usb2/core/usb2_request.c

Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.

Improvement: Skip invalid characters instead of replacing with a dot.

src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c

Spelling.

src/sys/dev/usb2/include/Makefile

Share "usbdevs" with the old USB stack.

src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h

Regenerate files.

Alfred: Please fix the RCS tag at the top.

src/sys/dev/usb2/include/usb2_ioctl.h

Fix compilation of "kdump".

src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c

Remove device ID's which will end up in a new 3G driver.

src/sys/dev/usb2/sound/uaudio2.c

Correct a debug printout.

src/sys/dev/usb2/storage/umass2.c

Sync with old USB stack.

src/lib/libusb20/libusb20.3

Add more documentation.

src/lib/libusb20/libusb20.c

Various bugfixes and improvements.

src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c

New commands for dumping strings and doing custom USB requests from
the command line.

Remove keyword requirements from generated files:
 "head/sys/dev/usb2/include/usb2_devid.h"
 "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
Giorgos Keramidas
00935aacf5 Add defaults for /etc/rc.d/gssd
Approved by:	dfr
2008-11-05 10:20:33 +00:00
Xin LI
cef3930d7c Correct a typo that prevented my laptop from starting
devd.
2008-11-04 23:03:36 +00:00
Rui Paulo
31fb990621 Add support for Asus A8Sr notebooks.
PR:		128553
Submitted by:	Eygene Ryabinkin <rea-fbsd at codelabs.ru>
Reviewed by:	philip
MFC after:	2 months
2008-11-04 11:52:50 +00:00
Doug Rabson
a9148abd9d Implement support for RPCSEC_GSS authentication to both the NFS client
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager.  I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.

The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.

To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.

As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.

Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.

The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.

Sponsored by:	Isilon Systems
MFC after:	1 month
2008-11-03 10:38:00 +00:00
Pawel Jakub Dawidek
3239bc5923 ifconfig(8) can take only one interface at a time. 2008-10-30 20:24:25 +00:00
Mark Peek
3f2459c989 Explicitly set the shell to /bin/sh when MK_TCSH == no.
Not objected to by:	sam
2008-10-29 18:46:47 +00:00
Andrew Thompson
5e3b315e31 Add ucomX shortcuts just like its uart sibling. 2008-10-27 17:19:14 +00:00
Andrew Thompson
9b35f11ea5 Make a note about the notify codes for the four special function keys above the
keyboard on the EeePC.
2008-10-27 16:20:40 +00:00
Sam Leffler
5b6f501657 o fix MK_TCSH == no: the default master.passwd sets up root to use /bin/csh
but there won't be one so root won't be able to login; edit the installed
  file to use /bin/sh in this case.
o while here split csh-related files apart from sh and only install them
  when requested
2008-10-27 16:13:28 +00:00
Andrew Thompson
02c7950097 Show which rc script is running since the default ^T just shows 'sh' as the
process.
2008-10-27 01:05:09 +00:00
Ed Schouten
53cb00a92b Sort `mount -p' output by name before checking for any differences.
I noticed on a system at home that restarting named(8) causes the
/var/named/dev mount to be moved to the bottom of the mount list,
because it gets remounted. When I received the daily security email this
morning, I was quite amazed to see that the security report listed the
differences, while it was nothing out of the ordinary.

If we just throw the `mount -p' output through sort(1), we'll only
receive notifications about changes to mounts if something has really
changed.
2008-10-25 18:45:40 +00:00
Warner Losh
64bf633eec Add entries for uart based serial ports. All the serial ports on mips
so far are uart subclasses.  Also, turn uart0 on by default.
2008-10-12 06:58:03 +00:00
Dag-Erling Smørgrav
0a25b2e007 Create separate cat directories for en.UTF-8. This, together with r183697,
allows users in en.UTF-8 locales to see non-ascii characters in man pages.

MFC after:	1 week
2008-10-08 13:28:02 +00:00
Brooks Davis
4c8b092e18 Remove compat support for vaps_<ifn> and vap_create_<ifn> variables as
promised in r178527.  These variables were never in a release version.

Reminded by:	sam
2008-10-01 18:46:46 +00:00
Ruslan Ermilov
85e5290d11 Allow a jail's IP alias to be created with an arbitrary netmask.
MFC after:	3 days
2008-09-24 15:18:27 +00:00
Sam Leffler
e8d1aafbed add back regdomain.xml
Noticed by:	jhay
2008-09-22 15:37:47 +00:00
Sam Leffler
690f477d75 add new build knobs and jigger some existing controls to improve
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd

Reviewed by:	various (posted to arch)
MFC after:	1 month
2008-09-21 22:02:26 +00:00
Andrew Thompson
51e1463035 Allow a jail to be started with a specific route fib.
Reviewed by:	secteam (simon)
Reviewed by:	brooks, bz
2008-09-16 20:18:25 +00:00
Bruce M Simpson
1f7f299117 Add support to rc.initdiskless for /conf/T/M/remount_subdir.
This allows the location of the configuration data to be relocated
within the filesystem containing it. A nullfs mount is used in order
to achieve this.

Obtained from:	XORP, Inc.
2008-09-09 18:40:50 +00:00
Gregory Neil Shapiro
3d7a6823f7 A no-op commit to simulate the effect of a forced commit so the file
has a new timestamp as needed for mergemaster.  A more long term
solution to this is needed since svn doesn't support forced commits.
2008-08-31 18:21:15 +00:00
John Baldwin
a0f01ecb62 Add the ability to run /usr/sbin/crashinfo on a new core dump automatically
during boot.  Right now this is disabled by default, but it can be enabled
by setting 'crashinfo_enable=YES' in rc.conf.

MFC after:	2 weeks
2008-08-29 20:30:30 +00:00
Gregory Neil Shapiro
523069c84e Google changed the location of the blacklists again.
Submitted by:	Tim Pozar
2008-08-28 07:03:13 +00:00