The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268
Make room for adding arm64 support to this driver by moving the
x86-specific feature parsing to a separate file.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27388
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
It includes:
ACPI_HANDLE() implementation.
AC and VIDEO ACPI events notification support.
Replacement of hand-rolled GPLed _DSM method evaluation helpers
with in-base ones.
Submitted by: wulf
Differential Revision: https://reviews.freebsd.org/D26603
This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This would be more accurately expressed as COMPAT_LINUXKPI implying or
requiring backlight, but config(8) doesn't really have a way to express
that. This fixes the build with COMPAT_LINUXKPI specified in one's kernel
config.
connections over multiple paths.
Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.
This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.
Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523
VMware now has arm64 support; move these to MI files in advance of
building them on arm64.
PR: 250308
Reported by: Vincent Milum Jr
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Fortuna remains the default; no functional change to GENERIC.
Big picture:
- Scalable entropy generation with per-CPU, buffered local generators.
- "Push" system for reseeding child generators when root PRNG is
reseeded. (Design can be extended to arc4random(9) and userspace
generators.)
- Similar entropy pooling system to Fortuna, but starts with a single
pool to quickly bootstrap as much entropy as possible early on.
- Reseeding from pooled entropy based on time schedule. The time
interval starts small and grows exponentially until reaching a cap.
Again, the goal is to have the RNG state depend on as much entropy as
possible quickly, but still periodically incorporate new entropy for
the same reasons as Fortuna.
Notable design choices in this implementation that differ from those
specified in the whitepaper:
- Blake2B instead of SHA-2 512 for entropy pooling
- Chacha20 instead of AES-CTR DRBG
- Initial seeding. We support more platforms and not all of them use
loader(8). So we have to grab the initial entropy sources in kernel
mode instead, as much as possible. Fortuna didn't have any mechanism
for this aside from the special case of loader-provided previous-boot
entropy, so most of these sources remain TODO after this commit.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22837
This change is based on the nexthop objects landed in D24232.
The change introduces the concept of nexthop groups.
Each group contains the collection of nexthops with their
relative weights and a dataplane-optimized structure to enable
efficient nexthop selection.
Simular to the nexthops, nexthop groups are immutable. Dataplane part
gets compiled during group creation and is basically an array of
nexthop pointers, compiled w.r.t their weights.
With this change, `rt_nhop` field of `struct rtentry` contains either
nexthop or nexthop group. They are distinguished by the presense of
NHF_MULTIPATH flag.
All dataplane lookup functions returns pointer to the nexthop object,
leaving nexhop groups details inside routing subsystem.
User-visible changes:
The change is intended to be backward-compatible: all non-mpath operations
should work as before with ROUTE_MPATH and net.route.multipath=1.
All routes now comes with weight, default weight is 1, maximum is 2^24-1.
Current maximum multipath group width is statically set to 64.
This will become sysctl-tunable in the followup changes.
Using functionality:
* Recompile kernel with ROUTE_MPATH
* set net.route.multipath to 1
route add -6 2001:db8::/32 2001:db8::2 -weight 10
route add -6 2001:db8::/32 2001:db8::3 -weight 20
netstat -6On
Nexthop groups data
Internet6:
GrpIdx NhIdx Weight Slots Gateway Netif Refcnt
1 ------- ------- ------- --------------------------------------- --------- 1
13 10 1 2001:db8::2 vlan2
14 20 2 2001:db8::3 vlan2
Next steps:
* Land outbound hashing for locally-originated routes ( D26523 ).
* Fix net/bird multipath (net/frr seems to work fine)
* Add ROUTE_MPATH to GENERIC
* Set net.route.multipath=1 by default
Tested by: olivier
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26449
dmi function are used to get smbios values.
The DRM subsystem and drivers use it to enabled (or not) quirks.
Reviewed by: hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26046
Driver for pwm-backlight compatible device.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26252
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
Make sure that building dev/sdhci/sdhci_fsl_fdt.c has all the right
dependencies until a proper fix can be made.
Sponsored by: Mellanox Technologies // NVIDIA Networking
Implement support for an eSDHC controller found in NXP QorIQ Layerscape SoCs.
This driver has been tested with NXP LS1046A and LX2160A (Honeycomb board),
which is incompatible with the existing sdhci_fsl driver (aiming at older
chips from this family). As such, it is not intended as replacement for
the old driver, but rather serves as an improved alternative for SoCs that
support it.
It comes with support for both PIO and Single DMA modes and samples the
clock from the extres clk API.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu, mmel, kibab
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26153
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
An internet draft titled "Towards Remote Procedure Call Encryption By Default"
describes how TLS is to be used for Sun RPC, with NFS as an intended use case.
This patch adds client and server support for this to the kernel RPC,
using KERN_TLS and upcalls to daemons for the handshake, peer reset and
other non-application data record cases.
The upcalls to the daemons use three fields to uniquely identify the
TCP connection. They are the time.tv_sec, time.tv_usec of the connection
establshment, plus a 64bit sequence number. The time fields avoid problems
with re-use of the sequence number after a daemon restart.
For the server side, once a Null RPC with AUTH_TLS is received, kernel
reception on the socket is blocked and an upcall to the rpctlssd(8) daemon
is done to perform the TLS handshake. Upon completion, the completion
status of the handshake is stored in xp_tls as flag bits and the reply to
the Null RPC is sent.
For the client, if CLSET_TLS has been set, a new TCP connection will
send the Null RPC with AUTH_TLS to initiate the handshake. The client
kernel RPC code will then block kernel I/O on the socket and do an upcall
to the rpctlscd(8) daemon to perform the handshake.
If the upcall is successful, ct_rcvstate will be maintained to indicate
if/when an upcall is being done.
If non-application data records are received, the code does an upcall to
the appropriate daemon, which will do a SSL_read() of 0 length to handle
the record(s).
When the socket is being shut down, upcalls are done to the daemons, so
that they can perform SSL_shutdown() calls to perform the "peer reset".
The rpctlssd(8) and rpctlscd(8) daemons require a patched version of the
openssl library and, as such, will not be committed to head at this time.
Although the changes done by this patch are fairly numerous, there should
be no semantics change to the kernel RPC at this time.
A future commit to the NFS code will optionally enable use of TLS for NFS.
Allow to dynamically grow the amount of fibs in each vnet.
This change alters current behavior. Currently, if one defines
ROUTETABLES > 1 in the kernel config, each vnet will be created
with the number of fibs defined in the kernel config.
After this commit vnets will be created with fibs=1.
Dynamic net.fibs is not compatible with net.add_addr_allfibs.
The plan is to deprecate the latter and make
net.add_addr_allfibs=0 default behaviour.
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26062
It was a driver for a USB FM tuner that was available in the market in 2002. I
wrote the driver in 2003. I've not used it since 2005 or so, so it's time to
retire this driver. No userland code ever interfaced to the special device it
created. There's no user base: the last bug I received on this driver was in
2004.
Relnotes: Yes
Add prng(9) as a replacement for random(9) in the kernel.
There are two major differences from random(9) and random(3):
- General prng(9) APIs (prng32(9), etc) do not guarantee an
implementation or particular sequence; they should not be used for
repeatable simulations.
- However, specific named API families are also exposed (for now: PCG),
and those are expected to be repeatable (when so-guaranteed by the named
algorithm).
Some minor differences from random(3) and earlier random(9):
- PRNG state for the general prng(9) APIs is per-CPU; this eliminates
contention on PRNG state in SMP workloads. Each PCPU generator in an
SMP system produces a unique sequence.
- Better statistical properties than the Park-Miller ("minstd") PRNG
(longer period, uniform distribution in all bits, passes
BigCrush/PractRand analysis).
- Faster than Park-Miller ("minstd") PRNG -- no division is required to
step PCG-family PRNGs.
For now, random(9) becomes a thin shim around prng32(). Eventually I
would like to mechanically switch consumers over to the explicit API.
Reviewed by: kib, markj (previous version both)
Discussed with: markm
Differential Revision: https://reviews.freebsd.org/D25916
Provide missing rules for ena_datapath.c and ena_netmap.c,
which prevented the ENA driver from building.
This issue was showing up only when building the driver statically
into the kernel.
PR: 248116
Submitted by: Artur Rojek <ar@semihalf.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25796
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This device was originally used as part of the goldfish virtual hardware
platform used for emulating Android on QEMU, but is now also used as the
RTC for the RISC-V virt machine in QEMU. It provides a simple 64-bit
nanosecond timer exposed via a pair of memory-mapped 32-bit registers,
although only with 1s granularity.
Reviewed by: brooks (mentor), jhb (mentor), kp
Approved by: brooks (mentor), jhb (mentor), kp
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25717
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.
Submitted by: Greg V <greg_unrelenting.technology>
Approved by: hselasky (removal of All rights reserved)
Differential Revision: https://reviews.freebsd.org/D25203
This patch introduces support for Epson RX-8803 RTC controller accessible
over I2C bus. It has a resolution of 1 sec.
Support for interrupt based alarm was not implemented.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24364
Add basic TCA6416 GPIO expander support over I2C bus. The driver handles
enabling and disabling pins, setting pin mode to IN and OUT and
toggling the pins. External interrupts are not supported.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24363
As usual, the full release notes are found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.5
Notable changes include:
* Improved decompress performance on amd64 and arm (5-10%
and 15-50%, respectively).
* '--patch-from' zstd(1) CLI option, which provides something like a very fast
version of bspatch(1) with slightly worse compression. See release notes.
In this update, I dropped the 3-year old -O0 workaround for an LLVM ARM bug;
the bug was fixed in LLVM SVN in 2017, but we didn't remove this workaround
from our tree until now.
MFC after: I won't, but feel free
Relnotes: yes
This variant get a random number up to the limit passed as the argument.
This is simply a copy of the libc version.
Sponsored-by: The FreeBSD Foundation
Reviewed by: cem, hselasky (previous version)
Differential Revision: https://reviews.freebsd.org/D24962
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
