Avoid use of register variables, which some compilers (e.g. clang)
don't like. It makes the code a little clearer as well.
This allows a clang 3.5 built powerpc world to run (tested in a jail).
MFC after: 1 week
The symbol leaked after r276630 since lib/libc/sys/openat.c defines
versions for openat using .symver (version script cannot assign two
versions to one symbol), and rtld uses openat. Instead, directly use
__sys_openat().
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
rtld-elf for powerpc 32 bit:
libexec/rtld-elf/powerpc/reloc.c:486:6: error: taking the absolute value of unsigned type 'Elf_Addr' (aka 'unsigned int') has no effect [-Werror,-Wabsolute-value]
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^
libexec/rtld-elf/powerpc/reloc.c:486:6: note: remove the call to 'abs' since unsigned values cannot be negative
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^~~
1 error generated.
Cast 'offset' to int, since that was intended, and should be safe to do
on architectures with 32-bit two's complement ints.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D1387
it exports to the debugger. It currently has two choices: it can use
a compiled-in path (/libexec/ld-elf.so.1) or it can use the path stored
in the interpreter path in the binary being executed. The runtime linker
currently prefers the second. However, this is usually wrong for compat32
binaries since the binary specifies the path of rtld on a 32-bit system
(/libexec/ld-elf.so.1) instead of the actual path (/libexec/ld-elf32.so.1).
For now, always assume the compiled in path (/libexec/ld-elf32.so.1) as
the rtld path and ignore the path in the binary for the 32-bit runtime
linker.
Differential Revision: https://reviews.freebsd.org/D1236
Reviewed by: kib
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
This implements part of RFC-2217
It's based off a patch originally written by Sujal Patel at Isilon, and
contributions from other Isilon employees.
PR: 173728
Phabric: D995
Reviewed by: markj, markm
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
Linux LD_ITERATE_PHDR(3):
The dlpi_name field is a null-terminated string giving the
pathname from which the shared object was loaded.
That functionality is much more useful than returning just the short
name.
Approved by: kan
Sponsored by: The FreeBSD Foundation
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
e.g. when a global variable is initialized with a pointer to ifunc.
Add symbol type check and call resolver for STT_GNU_IFUNC symbol types
when processing non-PLT relocations, but only after non-IFUNC
relocations are done. The two-phase proceessing is required since
resolvers may reference other symbols, which must be ready to use when
resolver calls are done.
Restructure reloc_non_plt() on x86 to call find_symdef() and handle
IFUNC in single place.
For non-x86 reloc_non_plt(), check for call for IFUNC relocation and
do nothing, to avoid processing relocs twice.
PR: 193048
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
All of the sources for the tests are contained in the
current working directory and the subdirectories
Phabric: D537
Reviewed by: jmmv
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
build time by using atf_tc_get_config_var(tc, "srcdir"))
This will allow end-users to move the binaries to different locations
after they've been built without having to rebuild the binaries with
the new paths
Phabric: D525 (part of a larger patch)
Reviewed by: jmmv
Approved by: jmmv (co-mentor)
As of r126744, we no longer feed the entropy device in jails upon
start, and collecting them is no longer useful.
PR: conf/126744
Submitted by: Eugene Grosbein <eugen grosbein net> (with minor changes)
MFC after: 1 week
Approved by: so (des)
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
With the move of atf-sh into /usr/libexec in r267181, some of the
tests in the integration_test program broke because they could not
execute atf-sh from the path any longer.
This slipped through because I do have a local atf installation in
my home directory that appears in my path, hence the tests could
still execute my own version.
Fix this by forcing /usr/libexec to appear at the beginning of the
path when attempting to execute atf-sh.
To make upgrading easy (and to avoid an unnecessary entry in UPDATING),
make integration_test depend on the Makefile so that a rebuild of the
shell script is triggered. This requires a hack in the *.test.mk files
to ensure the Makefile is not treated as a source to the generated
program. Ugly, I know, but I don't have a better way of doing this at
the moment. Will think of one once I address the TODO in the *.test.mk
files that suggests generalizing the file generation functionality.
PR: 191052
Reviewed by: Garrett Cooper
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
correct stack alignment, however when we have a leaf function that uses
thread local storage it calls __aeabi_read_tp to get the thread pointer.
Neither GCC or clang see this as a function call so will align the stack
to a 4-byte boundary. This may be a problem as _rtld_bind expects to be
on an 8-byte boundary.
The solution is to store a copy of the stack pointer and force the
alignment before calling _rtld_bind.
This fixes a problem with armeb where applications would crash in odd ways.
It should also remove the need for a local patch to clang to force the
stack alignment to an 8-byte boundary, even for leaf functions. Further
testing will be needed before reverting this local change to clang as we
may rely on it in other places.
Reviewed by: jmg@
descriptors in order to relocate RTLD itself. To allocate memory,
we need the pagesizes array initialized, but that happens after
RTLD is relocated. This ordering is important for amd64, but it's
opposite of what ia64 needs. Handle this conflict with the define
called RTLD_INIT_PAGESIZES_EARLY. When defined, obtain the page
sizes before relocating rtld, otherwise do it after.
Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This variable allows the loading of shared libraries via directory descriptors
rather than via library paths. If LD_LIBRARY_PATH_FDS=3:4:12, the directories
represented by file descriptors 3, 4 and 12 will searched for shared libraries
before the normal path-based mechanisms are used. This allows us to execute
unprivileged binaries from within a Capsicum sandbox even if they require
shared libraries.
Approved by: rwatson (mentor)
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
