The original NVMe API used bit-fields to represent fields in data
structures defined by the specification (e.g. the op-code in the command
data structure). The implementation targeted x86_64 processors and
defined the bit fields for little endian dwords (i.e. 32 bits).
This approach does not work as-is for big endian architectures and was
changed to use a combination of bit shifts and masks to support PowerPC.
Unfortunately, this changed the NVMe API and forces #ifdef's based on
the OS revision level in user space code.
This change reverts to something that looks like the original API, but
it uses bytes instead of bit-fields inside the packed command structure.
As a bonus, this works as-is for both big and little endian CPU
architectures.
Bump __FreeBSD_version to 1200081 due to API change
Reviewed by: imp, kbowling, smh, mav
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D16404
The idea was to get the uncontroversial mechanical change out of the way,
then get the meatier functional changes reviewed subsequently. I had not
realized that the immediately adjacent issue was addressed in a different
direction in r334506 (see Warner's guidance in D15592).
Discussion continues, trying to determine if there is a secondary issue
still[1] and how best to fix it. With 12-related activities coming up,
while that is ongoing, just take this back for now.
[1]: Shutdown-time eventhandler events fire normally during panic's reboot
path. Driver callbacks that attempt to issue and wait on interrupt-
completed IO may never complete, hanging the system. This is particularly
obnoxious in the shutdown/panic path, as the debugger cannot be entered
anymore and the hang prevents reboot restoring availability.
(There's nothing CAM-specific about this problem -- any shutdown
event-triggered driver could do something like this during panic. But most
NICs, etc. don't try to send spin-down commands at shutdown. ;-))
Discussed with: imp, markj
No functional change.
Note that this change is careful to set the CCB header xflags after
foo_fill_bar() routines, which generally zero existing flags. An earlier
version of this patch mistakenly set the flag before the fill routines.
Submitted by: Scott Ferris <sferris AT isilon.com>, jhibbits@
Reviewed by: bdrewery@, markj@, and non-committer FreeBSD contributor Anton Rang
Sponsored by: Dell EMC Isilon
It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
- Remove layering violation, when NVMe SIM code accessed CAM internal
device structures to set pointers on controller and namespace data.
Instead make NVMe XPT probe fetch the data directly from hardware.
- Cleanup NVMe SIM code, fixing support for multiple namespaces per
controller (reporting them as LUNs) and adding controller detach support
and run-time namespace change notifications.
- Add initial support for namespace change async events. So far only
in CAM mode, but it allows run-time namespace arrival and departure.
- Add missing nvme_notify_fail_consumers() call on controller detach.
Together with previous changes this allows NVMe device detach/unplug.
Non-CAM mode still requires a lot of love to stay on par, but at least
CAM mode code should not stay in the way so much, becoming much more
self-sufficient.
Reviewed by: imp
MFC after: 1 month
Sponsored by: iXsystems, Inc.
We're dropping the periph lock then dropping the refcount. However,
that violates the locking protocol and is racy. This seems to be
the cause of weird occasional panics with a bogus assert.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15517
When a disk disappears and the periph is invalidated, any I/Os that
are pending with the controller can cause a crash when they
complete. Move to holding the softc reference count taken in dastart()
until the I/O is complete rather than only until xpt_action()
returns. (This approach was suggested by Ken Merry.) This extends
the method used in da to ada, nda, and mda.
Sponsored by: Netflix
Submitted by: Chuck Silvers
latter casts the LBA to a 32-bit number before assigning it to the 64
bit structure entity. This works fine on the first 2TB of TRIMs, but
terrible beyond that due to trucation.
Also, add an assert to make sure we don't end too many DSM TRIM
entries in one request.
Sponsored by: Netflix
kern.cam.{,a,n}da.X.invalidate=1 forces *daX to detach by calling
cam_periph_invalidate on the underlying periph. This is for testing
purposes only. Include only with options CAM_TEST_FAILURE and rename
the former [AN]DA_TEST_FAILURE, and fix nda to compile with it set.
We're using it at work to harden geom and the buffer cache to be
resilient in the face of drive failure. Today, it far too often
results in a panic. While much work was done on SIM initiated removal
for the USB thumnb drive removal work, little has been done for periph
initiated removal. This simulates what *daerror() does for some errors
nicely: we get the same panics with it that we do with failing drives.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14581
When multiple trims are in the queue, collapse them as much as
possible. At present, this usually results in only a few trims being
collapsed together, but more work on that will make it possible to do
hundreds (up to some configurable max).
Sponsored by: Netflix
Remove bitfields from defined structures as they are not portable.
Instead use shift and mask macros in the driver and nvmecontrol application.
NVMe is now working on powerpc64 host.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13916
Now that we're queueing BIO_DELETE requests in the CAM I/O scheduler,
it make sense to try to combine as many as possible into a single
request to send down to hardware. Hopefully, lots of larger requests
like this are better than lots of individual transactions.
Note for future: need to limit based on total size of the trim
request. Should also collapse adjacent ranges where possible to
increase the size of the max payload.
Sponsored by: Netflix
Introduce flags word to describe the capacities of the peripheral.
First bit will describe if the periph driver allows multiple
outstanding TRIMS to be active in a device.
Modify the I/O scheduler so that the nda driver can queue trims
for a while after the first one arrives. We'll queue until we see
a I/O scheduler tick, then we'll schedule as many TRIMs as allowed
by other factors (currently this is slocts in the NVMe controller).
This mariginally helps the read latency issues we see with reads,
but sets the stage for the nda driver to do TRIM collapsing like the
da and ada drivers do today.
Sponsored by: Netflix
There's no compelling reason to return a cam_status type for this
function and doing so only creates confusion with normal C
coding practices. It's technically an API change, but the periph API
isn't widely used. No efffective change to operation.
Reviewed by: imp, mav, ken
Sponsored by: Netflix
Differential Revision: D14063
here. Return ENOMEM when we can't malloc a buffer for the DSM
TRIM. This should fix the WITNESS warnings similar to the following:
uma_zalloc_arg: zone "16" with the following non-sleepable locks held:
exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff800080c34d0) locked @ /usr/src/sys/cam/nvme/nvme_da.c:351
Reviewed by: scottl@
Sponsored by: Netflix
This provides a nice wrarpper around the XPT_PATH_INQ ccb creation and
calling.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13387
kernel scheduler is stopped, replace the by hand calling of
xpt_polled_action() with it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13388
information for that and XPT_PATH_INQ. Provide macros to encode/decode
major/minor versions. Read the link speed and lane count to compute
the base_transfer_speed for XPT_PATH_INQ.
Sponsored by: Netflix
allocations (for req and ccb, which ultimately contain the
nvme_cmd). As such, we can micro-optimize these routines. Add a
comment to this effect, and bzero the ccb used to make the requests
for the nda dump rotuine so it more closely matches a ccb allocated
with xpt_get_ccb().
Sponsored by: Netflix
Don't call cam_iosched_trim_done or cam_iosched_submit_trim for nda
since its hardware can handle almost an arbitrary number of TRIMs and
we don't have to be careful to only ever do one.
Sponsored by: Netflix
This patch changes the way XPT_GDEV_TYPE works for NVMe. The current
ccb_getdev structure includes pointers to the NVMe Identify Controller
and Namespace structures, but these are kernel virtual addresses which
are not accessible from user space.
As an alternative, the patch changes the pointers into padding in
ccb_getdev and adds two new types to ccb_dev_advinfo to retrieve the
Identify Controller (CDAI_TYPE_NVME_CNTRL) and Namespace
(CDAI_TYPE_NVME_NS) data structures.
Reviewed By: rpokala, imp
Differential Revision: https://reviews.freebsd.org/D10466
Submitted by: Chuck Tuffli
This adds support in pass(4) for data to be described with a
scatter-gather list (sglist) to augment the existing (single) virtual
address.
Differential Revision: https://reviews.freebsd.org/D11361
Submitted by: Chuck Tuffli
Reviewed by: imp@, scottl@, kenm@
All ndaX and ndaXpY nodes will appear as nvdX and nvdXpY as well
(through symlinks in devfs via the normal disk aliasing mechanism in
GEOM).
Differential Revision: https://reviews.freebsd.org/D11873
Under kern.cam we have certain sysctls that are per-device, such as the
ones under kern.cam.ada.[0-9]+.*. Add a "device_index" label annotation
to such sysctls, so that the Prometheus metrics exporter will give all
of those metrics the same name. The device number will be added to the
metric name as the "device_index" label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
per-protocol. This reduces the number scsi symbols references by
cam_xpt significantly, and eliminates all ata / nvme symbols. There's
still some NVME / ATA specific code for dealing with XPT_NVME_IO and
XPT_ATA_IO respectively, and a bunch of scsi-specific code, but this
is progress.
Differential Revision: https://reviews.freebsd.org/D7289
eliminates the need to special case everything in cam_xpt for new
transports. It is now a failure to not have a transport object when
registering the bus as well. You can still, however, create a
transport that's unspecified (XPT_)
Differential Revision: https://reviews.freebsd.org/D7289
cam_periph_releaes_locked() at the end of nvme_probe_start because we
hit an assertion which may be bogus. Instead, leak a periph until we
sort it out. Since these devices don't arrive and depart often, so
this is the lessor of two evils.
MFC after: 1 week
