We should support removing vdev from boot pool. Update loader zfs reader
to support com.delphix:removing.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18901
Create a rough and ready NOTES file from GENERIC, remove the duplication from
sys/conf/NOTES and add relevant no* directives to make this compile.
Reviewed by: jhb, manu (earlier versions that differed only in comments)
Differential Revision: https://reviews.freebsd.org/D21184
The COMPAT_43 option isn't quite like the other compat options, and arm64 makes
attempts to support it in 64-bit mode. In 32-bit compat mode, however, two
syscall implementations that COMPAT_FREEBSD32 assumes will be there are
missing. Provide implementations for these: ofreebsd32_sigreturn (which we'll
never encounter, so implement it as nosys as is done in kern_sig.c) and
ofreebsd32_getpagesize, where we'll always return 4096 since that's the only
PAGE_SIZE we support, similar to how the ia32 implementation does things.
Reviewed by: manu@
Differential Revision: https://reviews.freebsd.org/D21192
During early stages of kern_exec(), including strings copyout,
p_textvp for init is NULL. This prevented stack grow from working for
init execution.
Without stack gap enabled, initial stack segment size is enough for
strings passed by kernel to init. With the gap enabled, the used
address might fall out of the initial segment, which kills init.
Exclude initproc from the check for contexts which should not cause
stack grow in the target map.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Attempts to use cryptodev (e.g. tests at /usr/src/tests/sys/opencrypto
with armv8crypto added to the module lists) were causing a panic.
Submitted by: Greg V <greg_unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D21012
IPPROTO 33 is DCCP in the IANA Registry:
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
IPPROTO_SEP was added about 20 years ago in r33804. The entries were added
straight from RFC1700, without regard to whether they were used.
The reference in RFC1700 for SEP is '[JC120] <mystery contact>', this is an
indication that the protocol number was probably in use in a private network.
As RFC1700 is no longer the authoritative list of internet numbers and that
IANA assinged 33 to DCCP in RFC4340, change the header to the actual
authoritative source.
Reviewed by: Richard Scheffenegger, bz
Approved by: bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21178
Move ip6asfrag and the accompanying IP6_REASS_MBUF macro from
ip6_var.h into frag6.c as they are not used outside frag6.c.
Sadly struct ip6q is all over the mac framework so we have to
leave it public.
This reduces the public KPI space.
MFC after: 3 months
X-MFC: possibly MFC the #define only to stable branches
Sponsored by: Netflix
Consitently put () around return values.
Do not assign variables at the time of variable declaration.
Sort variables. Rename ia to ia6, remove/reuse some variables used only
once or twice for temporary calculations.
No functional changes intended.
MFC after: 3 months
Sponsored by: Netflix
Cleanup some comments (start with upper case, ends in punctuation,
use width and do not consume vertical space). Update comments to
RFC8200. Some whitespace changes.
No functional changes.
MFC after: 3 months
Sponsored by: Netflix
- Use new zlib headers;
- Removed z_alloc and z_free to use the common sys/dev/zlib version.
- Replace z_compressBound with compressBound from zlib.
While there, limit LZMA CFLAGS to apply only for g_uzip_lzma.c.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp> (with changes,
bugs are mine)
Differential Revision: https://reviews.freebsd.org/D20271
pmap's lock ensures that other operations on the pmap don't observe the
old mapping being broken before the new mapping is established. However,
pmap_kextract() doesn't acquire the kernel pmap's lock, so it may observe
the broken mapping. And, if it does, it returns an incorrect result.
This revision implements a lock-free solution to this problem in
pmap_update_entry() and pmap_kextract() because pmap_kextract() can't
acquire the kernel pmap's lock.
Reported by: andrew, greg_unrelenting.technology
Reviewed by: andrew, markj
Tested by: greg_unrelenting.technology
X-MFC with: r350579
Differential Revision: https://reviews.freebsd.org/D21169
It is part of -Wformat, which is enabled by -Wall. Empty format strings are
well defined and it is perfectly reasonable to expect them in a formatting
interface.
KDB is standard and the kdb_active variable is always available. So,
de-conditionalize inclusion of sys/kdb.h in kern_sysctl.c.
Reported by: Michael Butler <imb AT protected-networks.net>
X-MFC-With: r350713
Sponsored by: Dell EMC Isilon
Implement `sysctl` in `ddb` by overriding `SYSCTL_OUT`. When handling the
req, we install custom ddb in/out handlers. The out handler prints straight
to the debugger, while the in handler ignores all input. This is intended
to allow us to print just about any sysctl.
There is a known issue when used from ddb(4) entered via 'sysctl
debug.kdb.enter=1'. The DDB mode does not quite prevent all lock
interactions, and it is possible for the recursive Giant lock to be unlocked
when the ddb(4) 'sysctl' command is used. This may result in a panic on
return from ddb(4) via 'c' (continue). Obviously, this is not a problem
when debugging already-paniced systems.
Submitted by: Travis Lane (formerly: <travis.lane AT isilon.com>)
Reviewed by: vangyzen (earlier version), Don Morris <dgmorris AT earthlink.net>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20219
On FreeBSD 13.0, the fuse driver will always be known as fusefs. The
backwards compatibility symlink will still be used for stable/12 and
stable/11, though.
Reported by: jhibbits
Reviewed by: rgrimes, imp, cem
MFC after: Never
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21181
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
The API is used to gracefully terminate text line(s) with a single \n. If
the formatted buffer was empty or already ended in \n, it is unmodified.
Otherwise, a newline character is appended to it. The API, like other
sbuf-modifying routines, is only valid while the sbuf is not FINISHED.
Reviewed by: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21030
Code flow was somewhat difficult to read due to the combination of
multiple return sites and the 4x possible dynamic constructions of an
sbuf. (Future consideration: do we need all 4?) Refactored slightly to
improve legibility.
No functional change.
Sponsored by: Dell EMC Isilon
The goal is to avoid some kinds of low-memory deadlock when formatting
heap-allocated buffers.
Reviewed by: vangyzen
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21015
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.
During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.
MFC after: 1 week
Relnotes: yes
Sponsored by: iXsystems, Inc.
Some hardware needs more than 32, bump this value.
We cannot use the _alloc for of getencprop as this function is called
too early in the boot before pmap is initialized and we only have
2k of stack when cninit is called.
Discussed with: ian
The region for uart0 is declared to be 0x2000 in size but the parent
node only declare 0x1000.
As the parent only declare a size of 0x1000 in the ranges for it's children
this cause the device to not be mappable.
https://patchwork.kernel.org/patch/11056769/
This commit imports the new fusefs driver. It raises the protocol level
from 7.8 to 7.23, fixes many bugs, adds a test suite for the driver, and
adds many new features. New features include:
* Optional kernel-side permissions checks (-o default_permissions)
* Implement VOP_MKNOD, VOP_BMAP, and VOP_ADVLOCK
* Allow interrupting FUSE operations
* Support named pipes and unix-domain sockets in fusefs file systems
* Forward UTIME_NOW during utimensat(2) to the daemon
* kqueue support for /dev/fuse
* Allow updating mounts with "mount -u"
* Allow exporting fusefs file systems over NFS
* Server-initiated invalidation of the name cache or data cache
* Respect RLIMIT_FSIZE
* Try to support servers as old as protocol 7.4
Performance enhancements include:
* Implement FUSE's FOPEN_KEEP_CACHE and FUSE_ASYNC_READ flags
* Cache file attributes
* Cache lookup entries, both positive and negative
* Server-selectable cache modes: writethrough, writeback, or uncached
* Write clustering
* Readahead
* Use counter(9) for statistical reporting
PR: 199934 216391 233783 234581 235773 235774 235775
PR: 236226 236231 236236 236291 236329 236381 236405
PR: 236327 236466 236472 236473 236474 236530 236557
PR: 236560 236844 237052 237181 237588 238565
Reviewed by: bcr (man pages)
Reviewed by: cem, ngie, rpokala, glebius, kib, bde, emaste (post-commit
review on project branch)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Pull Request: https://reviews.freebsd.org/D21110
The exists() check guarding the invocation of ls was not working
correctly as it was expanding '$L' to determine the path of the local
modules directory. Fix by using {} around the variable name.
Inline some of the logic from bsd.subdir.mk when invoking local module
builds. This gives output in 'make buildkernel' the same as if there
was a Makefile in /usr/local/sys/modules with SUBDIR =
${LOCAL_MODULES}.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20991
- Check for an invalid device (vendor is invalid) before reading the
header type register when examining function 0 of a possible device.
- When iterating over functions of a device, reject any device whose
16-bit vendor is invalid rather than requiring the full 32-bit
vendor+device to be all 1's. In practice the latter check is
probably fine, but checking the vendor is what the PCI spec
recommends.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21147
- UMA_XDOMAIN enables an additional per-cpu bucket for freed memory that
was freed on a different domain from where it was allocated. This is
only used for UMA_ZONE_NUMA (first-touch) zones.
- UMA_FIRSTTOUCH sets the default UMA policy to be first-touch for all
zones. This tries to maintain locality for kernel memory.
Reviewed by: gallatin, alc, kib
Tested by: pho, gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20929
RT2860_WCID_MAX is supposed to describe the max STA index for wcid2ni, and
was instead being used as the size -- off-by-one.
rt2860_drain_stats_fifo was range-checking wcid only after accessing
out-of-bounds potentially.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (basically)
Obtained from: Haiku (58d16d9fe2d5a209cf22823359a8407d138e1a87)
Differential Revision: 3 days
hash was computed and the time that the superblock was copied to a
buffer to be written to disk. The result was a failed superblock
check hash the next time that the superblock was read.
The fix is to compute the check hash after the superblock has been
copied to a buffer to be written.
PR: 236504
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: Netflix
Previously the ICMPv6 input path incorrectly handled cases where an
MLDv2 listener query packet was internally fragmented across multiple
mbufs.
admbugs: 921
Submitted by: jtl
Reported by: CJD of Apple
Approved by: so
MFC after: 0 minutes
Security: CVE-2019-5608
Such speculations could use user-controlled %gs base, esp. since
FreeBSD supports WRGSBASE instructions.
Place LFENCEs on entry for each basic block after the test for
previous kernel/user mode on the kernel entry, which prevents the
speculation. Code accesses %gs-based PCPU before any serialization
instructions are executed, like %cr3 reload for KPTI.
With pti disabled, on haswell i7-4770S machine, "syscall_timings getppid"
shows when no lfence is added to syscall path:
test loop time iterations periteration
getppid 0 1.040918865 4643611 0.000000224
getppid 1 1.004985962 4481816 0.000000224
getppid 2 1.005196483 4482363 0.000000224
with lfence:
getppid 0 1.043701091 4554779 0.000000229
getppid 1 1.016930328 4438094 0.000000229
getppid 2 1.023223117 4466640 0.000000229
and ministat reports 'No difference proven at 95.0% confidence.'
Security: CVE-2019-1125
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
