When threads were added to the kernel, the pr_pid member of the
NT_PRSTATUS note was repurposed to store LWP IDs instead of process
IDs. However, the process ID was no longer recorded in core dumps.
This change adds a pr_pid field to prpsinfo (NT_PRSINFO). Rather than
bumping the prpsinfo version number, note parsers can use the note's
payload size to determine if pr_pid is present.
Reviewed by: kib, emaste (older version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7117
First, PL_FLAG_FORKED events now also set a PL_FLAG_VFORKED flag when
the new child was created via vfork() rather than fork(). Second, a
new PL_FLAG_VFORK_DONE event can now be enabled via the PTRACE_VFORK
event mask. This new stop is reported after the vfork parent resumes
due to the child calling exit or exec. Debuggers can use this stop to
reinsert breakpoints in the vfork parent process before it resumes.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7045
In particular for me this fixes checksum problem when if_bridge attached
to the interface requests TXCSUM to be disabled, but effectively ignored.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
is delivered to vforked child. Issue is that we avoid stopping such
children in issignal() to not block parents. But executed AST, which
ignored stops, leaves the child with the signal pending but no AST
pending.
On first exec after vfork(), call signotify() to handle pending
reenabled signals. Adjust the assert to not check vfork children
until exec.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
illumos/illumos-gate@4b5c8e93ca4b5c8e93cahttps://www.illumos.org/issues/7104
The current default indirect block size is 16KB. We can improve
performance by increasing it to 128KB. This is especially helpful for
any workload that needs to read most of the metadata, e.g.
scrub/resilver, file deletion, filesystem deletion, and zfs send.
We also need to fix a few space estimation errors to make the tests
pass.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@25f7d993ad25f7d993adhttps://www.illumos.org/issues/7071
upstream
DLPX-40482 lzc_snapshot does not fill in errlist on ENOENT
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@dcbf3bd6a1dcbf3bd6a1https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much larger
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
simplebus_add_device() expect a simplebus_softc structure associated with
the device.
Add the simplebus_softc as first member in am335x_pwmss_softc structure.
Sponsored by: Rubicon Communications (Netgate)
superblock, allowing provider to be bit bigger, i.e. have some
extra padding after the FS image. That in some cases might be
a side-effect of using CLOOP format which enforces certain block
size and trying to compress image that is not exactly the number
of those blocks in size. The UFS itself does not have any issues
mounting such padded file systems, so it's what GEOM_LABEL should
do.
Submitted by: @mizhka_gmail.com
Differential Revision: https://reviews.freebsd.org/D6208
optimizations into two distinct pieces. The first piece consists of the
code that should only be performed once per page fault and requires the map
to be locked. The second piece consists of the code that should be
performed each time a pager is called on an object in the shadow chain.
(This second piece expects the map to be unlocked.)
Previously, the entire implementation could be executed multiple times.
Moreover, the second and subsequent executions would occur with the map
unlocked. Usually, the ensuing unsynchronized accesses to the map were
harmless because the map was not changing. Nonetheless, it was possible for
a use-after-free error to occur, where vm_fault() wrote to a freed map
entry. This change corrects that problem.
Reported by: avg
Reviewed by: kib
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
This is meant to install a new BE (boot environment) given a fully built
world/kernel. In addition to installing world and kernel in the new BE,
it also automatically performs /etc updates (using etcupdate or mergemaster)
and package updates (using pkg).
Because this process is performed in a new BE, it reduces the need for a
second reboot. It also means a reboot into a partially updated system (due
to install or hardware failure) can't happen.
Inspired by and similar in function to Solaris/illumos-style upgrades.
Instead of using a hash table to convert physical page addresses to offsets
in the sparse page array, cache the number of bits set for each 4MB chunk of
physical pages. Upon lookup, find the nearest cached population count, then
add/subtract the number of bits from that point to the page's PTE bit.
Then multiply by page size and add to the sparse page map's base offset.
This replaces O(n) worst-case lookup with O(1) (plus a small number of bits
to scan in the bitmap). Also, for a 128GB system, a typical kernel core of
about 8GB will now only require ~4.5MB of RAM for this approach instead of
~48MB as with the hash table.
More concretely, /usr/sbin/crashinfo against the same core improves from a
max RSS of 188MB and wall time of 43.72s (33.25 user 2.94 sys) to 135MB and
9.43s (2.58 user 1.47 sys). Running "thread apply all bt" in kgdb has a
similar RSS improvement, and wall time drops from 4.44s to 1.93s.
Reviewed by: jhb
Sponsored by: Backtrace I/O
L3 cache is not defined by Book-E, so is platform specific. Since it was
already moved for e500-based devices into mpc85xx in r292903, just eliminate it
altogether. Any device that supports L3 cache should have its own platform
means to enable it.
When we change nvl_array_next to NULL it means that we want to destroy or
take nvlist_array. The nvpair, which stores next nvlist of nvlist_array element
is no longer needed and can be freed.
Submitted by: Adam Starak <starak.adam@gmail.com>
MFC after: 1 week
- add new rman for prefetchable memory. Is used only if given 'ranges'
property contains prefetchable memory range.
- not all ranges in 'ranges' property are subject for rman's filling.
Tegra for example, have two addition records which are used for
'pci 'register' -> 'assigned-address' -> 'ranges' machinery.
Add sc_ranges_mask for masking not rman related ranges.
- consistently pass unknown (not managed at this level) resources
allocation/release/adjust requests to parent.
MFC after: 3 weeks
This is probably a NOP change since IS register is not activery used for
interrupts below the shared, but it looked odd to clear interrupts we did
not handle.
This fixes a bug with link local addresses. This will require and
upcoming change in the kernel to bring SCTP to the same behaviour
as UDP and TCP.
MFC after: 3 days
them down. This hack still remains:
* 2. Illegal byte sequences in filenames are handled by treating them as
* single-byte characters with a values of such bytes of the sequence
* cast to wchar_t.
2) Reword the comment in the hack above to reflect implementation.
3) Protect signed wchar_t from sign extension when a signed char is assigned
to it in the hack above.
3) Corresponding backward hack in g_Ctoc() was not implemented, so all
pathes with illegal byte sequences are skipped as result, implement it now.
4) globtilde() forget to convert expanded user home dir from multibyte to
wchar.
5) Protect globtilde() from long expansion truncation.
6) Results was not sorted according to collate as POSIX requires.
If an encrypted install is attempted and fails for any reason, the disk
cannot be erased by the installer because the partition is in use by GELI
At the start of the installation process, all ZFS pools are exported and
all GELI instances are detached, to allow a restarted install to proceed
PR: 210814
Reported by: jonathan
MFC after: 10 days
The pools are exported and reimported in order to write the bootcode
This causes an error when the bootpool is later mounted by common code
The bootpool is now imported with the -N flag to prevent mounting
Reported by: Michael Dexter
MFC after: 5 days
H3 EMAC is the same as A83T/A64 except the SoC includes an (optional)
internal 10/100 PHY. Both internal and external PHYs are supported on H3
with this driver.
that struct kevent member ident has uintptr_t type, which is silently
truncated to int in the call to fget(). Explicitely check for the
valid range.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
There seems no hard limit on number of segments per packet in the chip,
and 20 appeared insufficient. Hope 64 will be enough, but if not -- add
check to report that and drop the packet instead of corrupting stack.
