comparing bit by bit.
Make the logic in in6_fillscopeid() match that in our ifconfig(8):
only set the scope ID if there is one in the address and none in
sin6_scope_id.
Correct a comment in network_init() that didn't make sense; it was
probably never updated after it was pasted from similar code in
addrmerge().
stealth hints loading. 'make release' has been fixed to not need this
now anyway. If you want static hints, specify it explicitly.
Hey! Why did it suddenly get so dark??
o Much cleanly separate NetBSD(XS) / FreeBSD(CAM) codes.
o Improve tagged queing support (full QTAG).
o Improve quirk support.
o Improve parity error retry.
o Impliment wide negotheation.
o Cmd link support.
o Add copyright of CAM part.
o Change for CAM_NEW_TRAN_CODE.
o Work around for buggy KME UJDCD450.
o stg: add disconnet condition.
o nsp: use suspend I/O.
and more. I thank Honda-san.
conf/options.pc98: add CT_USE_RELOCATE_OFFSET and CT_BUS_WEIGHT
dev/{ct,ncv,nsp,stg}/*_{pccard,isa}.c: add splcam() before calling
attach/detach functions.
Tested by: bsd-nomads
Obtained from: NetBSD/pc98
support. Trying to fix the merged set where dynamic overrode
static was getting more and more complicated by the day.
This should fix the duplicate atkbd, psm, fd* etc in GENERIC. (which
paniced the alpha, but not the i386)
- All sources are built in a single object, reducing namespace pollution.
- Kill the ready queue, and handle a busy response to mly_start in callers
rather than deferring the command.
- Improve our interaction with CAM:
- Don't advertise physical channels as SCSI busses by default.
- use the SIM queue freeze capability rather than queueing CDBs internally.
- force bus reprobe at module load time.
- Clean up more resources in mly_free.
- Tidy up debugging levels.
- Tidy up handling of events (mostly just code cleanliness).
- Use explanatory macros for operations on bus/target/channel numbers.
extra getblk/brelse sequence for each lookup. We already had this
buf in ufsdirhash_lookup(), so there was no point in brelse'ing it
only to have the caller immediately reaquire the same buffer.
This should make the case of sequential lookups marginally faster;
in my tests, sequential lookups with dirhash enabled are now only
around 1% slower than without dirhash.
This should help us in nieve benchmark "tests".
It seems a wide number of people think 32k buffers would not cause major
issues, and is in fact in use by many other OS's at this time. The
receive buffers can be bumped higher as buffers are hardly used and several
research papers indicate that receive buffers rarely use much space at all.
Submitted by: Leo Bicknell <bicknell@ufp.org>
<20010713101107.B9559@ussenterprise.ufp.org>
Agreed to in principle by: dillon (at the 32k level)
authentication is enabled, the client effectively ignores any error
from krb5_rd_rep due to a missing branch.
In theory this could result in an ssh client using Kerberos 5
authentication accepting a spoofed AP-REP. I doubt this is a real
possiblity, however, because the AP-REP is passed from the server to
the client via the SSH encrypted channel. Any tampering should cause
the decryption or MAC to fail.
Approved by: green
MFC after: 1 week
By default, we will end up with a duplicate set of hints if people have
a properly populated /boot/device.hints. So for now, remove the hints
here until Peter revisits the new hints processing from mid-June that
broke Alpha booting.
device search code i introduce nearly six years ago in rev 1.8. Bruce
suggested to rather use the device name of the root filesystem instead
which is certainly the most sensible default. Since there are many
possible cases for a root filesystem name (device with and without
slices, consider /dev/vinum/root even though it currently could not
work as such), there's some heuristic using a RE in order to find out
the canonical device name from the mounted name. This probably won't
quite fit for a NFS root (can't test that right now), but then,
there's hard to find a good default for those machines anyway. ;-)
This unbreaks the functionality of rev 1.2 i once broke in 1.8. :)
getopt(3) (and can't be converted without breaking compatibility), and
it's very irritating to have it silently DTWT if one combines options
together (e.g., "-msS domain,server").
Fold -xwidth functionality into -width. .Bl now tests whether
string immediately following a leading dot starts with a valid
macro name.
Added similar functionality to the -column list's column width
specifiers. For example, the following now works as expected:
.Bl -column ".Va hw.crusoe.percentage" ".Vt integer" "Changeable"
.It Sy "Name\tType\tChangeable\tDescription"
.It Va hw.crusoe.longrun Ta Vt integer Ta yes Ta "LongRun mode:"
.It Ta Ta Ta "0: minimum frequency mode"
.It Ta Ta Ta "1: power-saving mode"
.It Ta Ta Ta "2: performance mode"
.It Ta Ta Ta "3: maximum frequency mode"
.It Va hw.crusoe.frequency Ta Vt integer Ta no Ta "Current frequency (MHz)."
.It Va hw.crusoe.voltage Ta Vt integer Ta no Ta "Current voltage (mV)."
.It Va hw.crusoe.percentage Ta Vt integer Ta no Ta "Processing performance (%)."
.El
This is especially useful for groff devices with variable width
fonts, like -Tps or -TX100.
