POWER8 systems. During thread switch, there was a very small window when
the stack pointer was set to the stack pointer of the outgoing thread, but
after the lock on that thread had already been released.
If, during that window, the outgoing thread were rescheduled on another CPU
and begin execution and an exception were taken on the original CPU, the
trap handler and the outgoing thread would simultaneously execute on the same
stack, causing memory corruption. Fix this by making sure to release the
old thread only after cpu_switch() is done with its stack.
MFC after: 2 weeks
Sponsored by: FreeBSD Foundation
every possible trap address by default. This also makes sure the kernel
notices (and panics at) traps from newer CPUs that the kernel was not
expecting rather than executing gibberish memory.
that we (a) get the correct large page size to provide to pmap and (b)
we can alert the user if running under incorrectly-configured PowerKVM
on POWER7 and POWER8 systems.
MFC after: 1 week
Drivers (ULDs) and the base if_cxgbe driver.
Track the per-adapter activation of ULDs in a new "active_ulds" field.
This was done pretty arbitrarily before this change -- via TOM_INIT_DONE
in adapter->flags for TOM, and the (1 << MAX_NPORTS) bit in
adapter->offload_map for iWARP.
iWARP and hw-accelerated iSCSI rely on the TOE (supported by the TOM
ULD). The rules are:
a) If the iWARP and/or iSCSI ULDs are available when TOE is enabled then
iWARP and/or iSCSI are enabled too.
b) When the iWARP and iSCSI modules are loaded they go looking for
adapters with TOE enabled and enable themselves on that adapter.
c) You cannot deactivate or unload the TOM module from underneath iWARP
or iSCSI. Any such attempt will fail with EBUSY.
MFC after: 2 weeks
This is a sync against iwn(4) and openbsd.
- Add power management support;
- Add background scanning support;
- Fix few LORs;
- Handle rfkill switch state changes properly;
- Fix recovering after firmware failure;
- Add more error checking;
- Cleanup & disable by default debug output;
- Update macroses names;
- Other various fixes;
- Add IBSS support:
- don't set data_ntries field for management frames;
- Add AHDEMO support:
- fix padding;
- Sync eeprom functions;
- Use CMD_RXON_ASSOC where possible;
- Enable HW CCMP encryption/decryption for pairwise keys;
- Fix filter flags for CMD_RXON.
Tested (by submitter) - iwn 3945 NIC. I have one somewhere; I'll
validate this later on and revert it if it's a problem.
Thanks!
PR: 197143
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
In a couple of cases a variable "stayopen" can be checked
unitialized. This is of no danger as the complementary
condition is false but prevent the access by switching
the checks.
CID: 1018729
CID: 1018732
This change introduces new target option "port", that assigns current target
to specified CTL port. On config application ctld(8) will apply LUN mapping
according to target configuration to specified port and bring the port up.
On shutdown cltd(8) will remove the mapping and put the port down.
This change allows to configure both iSCSI and FibreChannel targets in the
same configuration file in alike way.
Kernel side support was added earlier at r278037.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
[FastIsel][X86] Fix invalid register replacement for bool args
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
This fixes a possible assertion failure when compiling toolbox.cxx from
LibreOffice 4.3.5.
Reported by: kwm
the ia_array field of struct ar9300_ini_array const, and removing the
const-dropping casts. No functional change.
Reviewed by: adrian
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1725
within [INT_MIN, INT_MAX] where the magnitude of the lower
and upper bounds are sufficiently large to span the range of
scalbn[fl].
While here, remove the GNU style bug in the function declarations.
Reviewed by: bde, pfg
This is required to prevent problems with nss modules that use libthr when
upgrading from releases prior to 10.1.
PR: 197366
Sponsored by: DARPA, AFRL
Differential Revision: D1790
Reviewed by: cperciva
MFC after: 3 days
target iSCSI offload. Add mechanism to query maximum receive data segment
size supported by chosen hardware offload module, and use it in ctld(8)
to determine the value to advertise to the other side.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
to a crash dump and kernel, respectively. The existing -m/-e flags are
still supported for backwards compatiblity but are no longer documented.
Requested by: np
MFC after: 2 weeks
Intel Multiprocessor Specification v1.4. The Intel SDM claims that
the INIT IPIs here are invalid, but other systems follow the MP
spec instead.
While here, fix the IPI wait routine to accept a timeout in microseconds
instead of a raw spin count, and don't spin forever during AP startup.
Instead, panic if a STARTUP IPI is not delivered after 20 us.
PR: 196542
Differential Revision: https://reviews.freebsd.org/D1719
MFC after: 2 weeks
This change allows multiple "portal-group" options to be specified per
target. Each of them may include new optional auth-group name parameter
to override per-target auth parameters for specific portal group.
Kernel side support was added earlier at r278161.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
particular, updates to the watchdog should no longer sleep.
- Add a new IPMI_IO_LOCK for low-level I/O access. Use this for
kcs_polled_request() and smic_polled_request().
- Add a new backend callback "ipmi_driver_request" to handle a driver
request. The new callback performs the request sychronously for KCS
and SMIC. SSIF still defers the work to the worker thread since the
worker thread sleeps during request processing anyway.
- Allocate driver requests on the stack rather than using malloc().
Differential Revision: https://reviews.freebsd.org/D1723
Tested by: scottl
MFC after: 2 weeks
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
