This includes support for:
- Read-Write Error Recovery mode page;
- Informational Exceptions Control mode page;
- Logical Block Provisioning mode page;
- LOG SENSE command.
No real Informational Exceptions features yet. This is only a placeholder.
Sponsored by: iXsystems, Inc.
SPC-4 r2 allows to return empty defect list if the list is not supported.
We don't reallu support defect data lists, but this suppresses some errors.
MFC after: 1 week
Make this subcommand less FC-specific, reporting target and port addresses
in more generic way. Also make it report list of connected initiators in
unified way, working for both FC and iSCSI, and potentially others.
MFC after: 1 week
Such LUNs will be visible to initiators, but return "not ready" status
on media access commands. If backing storage become available later,
`ctladm modify ...` or `service ctld reload` can trigger its reopen.
or I_T NEXUS LOSS, clear all minor UAs for the LUN, redundant in this case.
All SAM specifications tell that target MAY do it, but libiscsi initiator
seems require it to be done, terminating connection with error if some more
UAs happen to be reported during iSCSI connection.
MFC after: 3 days
Without clustering support we any way have only one group of permanently
active ports, but that gives us one more supported VMWare feature. ;)
Solaris' Comstar also reports it even when only one port is present.
It allows to bypass range checks between UNMAP and READ/WRITE commands,
which may introduce additional delays while waiting for UNMAP parameters.
READ and WRITE commands are always processed in safe order since their
range checks are almost free.
Before this change UNMAP completely blocked other I/Os while running.
Now it blocks only colliding ones, slowing down others only due to ZFS
locks collisions.
Sponsored by: iXsystems, Inc.
At this moment it works only for files and ZVOLs in device mode since BIOs
have no respective respective cache control flags (DPO/FUA).
MFC after: 1 month
Sponsored by: iXsystems, Inc.
sizeof(struct scsi_inquiry_data) of 256 bytes combined with off-by-one
error in the changed code gave total INQUIRY data length above 255 bytes,
that was maximal INQUIRY length in SPC-2. While SPC-3 increased the
maximal length to 64K, at least sg3_utils are still confused by that.
MFC after: 1 week
This allows to avoid extra network traffic when copying files on NTFS iSCSI
disks within one storage host by drag'n'dropping them in Windows Explorer
of Windows 8/2012. It should also accelerate Hyper-V VM operations, etc.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
After I gave each iSCSI target its own port, the old limit appeared to be
not so big. This change almost proportionally increases per-LUN memory
use, but it is still three times better then it was before r268807.
MFC after: 2 weeks
CTL never had use for CA support code since SPI has gone, and there is no
even frontends supporting that. But it still was reserving 256 bytes of
memory per LUN per every possible initiator on every possible port.
Wrap unused code with ifdef's in case somebody even need it.
MFC after: 2 weeks
This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.
LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.
Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
