Jordan K. Hubbard
b4a24ca1f0
Don't run routed by default.
...
Virtually-Demanded-At-Gunpoint-By: joerg
1996-12-02 05:01:02 +00:00
Jordan K. Hubbard
a2a3d9f413
Move configResolv() to *after* the chroot(). This is what was causing
...
NFS installation to fail the first time. This will go into 2.2.
1996-12-01 12:27:36 +00:00
Jordan K. Hubbard
ab9a6af1c4
Change boolean nature of "router" variable since it's not a boolean
...
anymore.
Noticed-By: joerg
1996-11-29 23:52:20 +00:00
Poul-Henning Kamp
f8d8dfe86e
Try to impreve DD mode.
...
Try to make 4Mb floppies work again.
1996-11-27 22:52:34 +00:00
Jordan K. Hubbard
d8c4fd0c82
Correct some typos relating to PC98 server selection.
...
Submitted-By: HOSOKAWA Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1996-11-27 12:44:43 +00:00
Joerg Wunsch
4b8d17f492
Open devices read-only to test whether they are available. This
...
allows to use write-protected tapes...
1996-11-27 01:01:52 +00:00
Joerg Wunsch
7ef22d9129
Provide a symlink for /bin/sh when the fixit floppy is mounted, so
...
scripts using #!/bin/sh (like /mnt2/dev/MAKEDEV) will work.
Observed by: andreas
1996-11-16 22:42:13 +00:00
Jordan K. Hubbard
532c723611
Add vx to list of devices.
1996-11-15 19:53:08 +00:00
Jordan K. Hubbard
5c3507a872
"over 600 packages" (geeze, this has been sitting uncommitted in my
...
source tree for 5 days! :-( ).
1996-11-14 05:46:22 +00:00
Jordan K. Hubbard
01f8d17065
Bring forward doc changes from 2.2. Much will need changing for 3.0,
...
which is where this is headed, but it's better than the 2.2-SNAP
docs.
1996-11-13 12:35:17 +00:00
Jordan K. Hubbard
9378cb736f
Only save userconfig changes if the boot floppy version and the
...
installed version match.
Pointed-out-by: hosokawa@mt.cs.keio.ac.jp (HOSOKAWA Tatsumi)
1996-11-12 18:39:35 +00:00
Jordan K. Hubbard
d3400928da
Disgusting kludge to make depend rule work again in the fact of
...
Joerg's keymap.[ch] changes. If there's a better way, I'd like to know.
1996-11-09 20:50:23 +00:00
Jordan K. Hubbard
27fc704092
Whups, we need the VGA16 server by default too.
1996-11-09 19:47:24 +00:00
Jordan K. Hubbard
d5d267d104
1. Saner ldconfig path.
...
2. Choose DIST_XF86_CFG in defaults; XF86Setup isn't happy otherwise.
1996-11-09 19:26:01 +00:00
Jordan K. Hubbard
2ce9c19184
1. Take out console setup in options now that Joerg has moved it into
...
the main menu.
2. Conditionalized a few small things which needed it.
3. Put PC98 X servers in their own menu, there are so many of them now.
4. Rampaged on the menus.c file in general, reformatting and cleaning up.
1996-11-09 18:12:17 +00:00
Joerg Wunsch
9b23ef93f3
Sysinstall now offers the installation of a keymap early in the game!
...
Not all mappings are supported, most languages come only with one
encoding since this should be sufficient to get up & running in using
sysinstall, and we are already pretty tight on space. (My previous
commit has already bumped the boot MFS size by another 50 KB for
this.)
This feature requires the `kbdcontrol -L' i've just committed. Plain
text keymaps and the entire scanner are overkill for sysinstall.
Also updated the list of available keymaps while i was at it.
Reviewed by: jkh
1996-11-09 16:47:08 +00:00
Joerg Wunsch
518c7f2a9a
Several improvements to the `fixit' configuration:
...
. Don't gzip the crunched binary by now; it just fits, and execution is
a lot faster this way (it's truly demand-paged again).
. Add more(1), ft(8), protocols(5), a stripped down services(5).
. Improve the .profile, and make sysinstall actually use it again.
Still no go for a 4 MB configuration though. :-(
1996-11-09 16:25:47 +00:00
Joerg Wunsch
1553b61593
If mounting the fixit floppy fails in the first place, warn the user
...
but make a second attempt using MNT_FORCE, just in case it has been
unclean from a previous crash. That's dangerous, but far better than
keeping the despaired user standing in the rain...
(Experienced admins can still fsck it then, and remount. Others will
either totally crash, or incidentally succeed, without much further
help possible...)
Btw., mount(2) misses the description of MNT_FORCE for the mount
syscall.
1996-11-09 11:57:40 +00:00
Jordan K. Hubbard
0108501f0f
1. Eliminate the sendmail.cw bogon again. Peter fixed it correctly.
...
2. Preload the ldconfig cache before calling X setup.
1996-11-08 05:38:27 +00:00
Jordan K. Hubbard
eee8f917c7
More cosmetic tweaks, get the prefixes adjusted properly to XFree86 3.2's
...
new packaging scheme.
1996-11-07 18:30:59 +00:00
Jordan K. Hubbard
8882073d4a
Make sure current_chunk is 0 each time we enter the editor.
1996-11-07 16:40:10 +00:00
Jordan K. Hubbard
fddc8f18c1
This warning is too annoying now. Kill it.
1996-11-07 16:34:12 +00:00
Jordan K. Hubbard
f283407434
Install an evil work-around for /etc/sendmail.cw
...
[same as from 2.2]
1996-11-07 15:45:59 +00:00
Jordan K. Hubbard
4cb0381943
Complete switch-over to XF86 3.2.
1996-11-07 15:35:48 +00:00
Jordan K. Hubbard
f038904906
Properly clear FTP site selection info when network init fails; the
...
site name may have been wrong, or need to be specified by IP.
1996-11-07 14:17:09 +00:00
Jordan K. Hubbard
663b45cb90
Joerg's changes to add screen font and screenmap setting.
...
Some changes of my own to make screen saver configuration a little
more sane, and also make it easier to get to the keyboard/screen
setup from the options menu.
1996-11-07 08:03:29 +00:00
Jordan K. Hubbard
46a414ffbb
Update to XFree86 3.2
1996-11-06 19:15:30 +00:00
Poul-Henning Kamp
01961df54d
Remove a bogon from version 1.69. Just because we say "use all disk"
...
doesn't mean that our geometry can be flushed down the drain.
1996-11-05 19:53:20 +00:00
Jordan K. Hubbard
d57b472224
Placate Joerg some more by making screen savers get a reasonable default
...
timeout.
2.2-RELEASE candidate, like all the work here in release/sysinstall.
1996-11-04 17:42:22 +00:00
Jordan K. Hubbard
5def50038a
Use macros for package names so it's easier to update them in one
...
place (sysinstall.h) when packages change rev.
Change the way that the routing daemon is configured entirely, to
placate Joerg. Also auto-load gated if it's specified, while we're at it.
1996-11-04 12:56:33 +00:00
Jordan K. Hubbard
3c669c7ea7
Make it clearer that DNS has succeeded for your host choice.
1996-11-04 02:12:49 +00:00
Jordan K. Hubbard
232c762e37
Fix a bogus decent into the network setup screen when running
...
multi-user.
Don't clear media on dist failure - this was one of those "seemed like a good
idea at the time" sorts of features.
1996-11-02 19:50:32 +00:00
Wolfram Schneider
88f04d6fce
fix FAQ URL. Note for Jordan: don't merge this change into 2.1.6!
1996-10-23 22:28:56 +00:00
Jordan K. Hubbard
11fcd0ba76
Don't casually blow away FTP site settings now that it's easy for user
...
to override them.
1996-10-14 21:50:38 +00:00
Jordan K. Hubbard
e738250b89
Remove the now-unusable ports configuration code. Swapping CDs is bogus.
1996-10-14 21:32:39 +00:00
Jordan K. Hubbard
d2322fc6ac
Be less draconian about distribution extraction errors - still write
...
/etc file changes out.
1996-10-12 23:48:33 +00:00
Eric L. Hernes
b14765b3ed
Get the pysical address for id_maddr when opening an -incore kernel.
...
This fixes the kernel panic when propagating userconfig changes to
arbitrary kernels.
Remove obsoleted `#include <tcl.h>' added a few <stdio.h> where
necessary.
Fix getting scsi bus information from an -incore kernel.
Turned on SAVE_USERCONFIG by default.
1996-10-12 20:23:26 +00:00
Jordan K. Hubbard
0383bc6a90
Some cosmetic tweaks, attempt to fix package wait problem by checking
...
for error return as well (not sure if this is it, but it's one possible
explanation).
1996-10-12 19:30:26 +00:00
Jordan K. Hubbard
04f11c618f
Ahem. It might be nice if I included /usr/src/contrib in with the other
...
src dists. This alone is a good reason to re-roll the SNAP before putting
it on CD.
1996-10-10 09:22:37 +00:00
Jordan K. Hubbard
b11806da8c
DTRT if ESC is hit in a Yes/No dialog.
...
Noticed-by: jfieber
1996-10-09 09:53:41 +00:00
Jordan K. Hubbard
7bea4afad3
Sigh. There are still some weird boundry cases (argh!). Turn
...
off SAVE_USERCONFIG again until Eric comes back from his trip.
1996-10-06 16:31:12 +00:00
Jordan K. Hubbard
ae58bac757
Detect the zero-chunks case properly, now that I've reversed the order
...
of the distribution probes over ftp.
Properly #ifdef the SAVE_USERCONFIG code.
1996-10-06 14:45:57 +00:00
Jordan K. Hubbard
b9403756ad
Correctly re-adjust current slice # when slices are deleted.
...
Beautify the code a little.
1996-10-06 11:40:31 +00:00
Jordan K. Hubbard
1f3a0ea7fd
Turn SAVE_USERCONFIG on again - I found the bug.
1996-10-06 03:20:12 +00:00
Jordan K. Hubbard
48addbfd79
Better PKG_TMPDIR handling.
1996-10-06 03:18:55 +00:00
Jordan K. Hubbard
60e7f875ed
Be more paranoid about clearing the FTP path when we have the slightest
...
reason to doubt its authenticity.
1996-10-06 02:10:54 +00:00
Jordan K. Hubbard
f5e8e60f1f
Make the save_userconfig() stuff conditional and turned off by default
...
(for now - still a few more wrinkles here). Add more debugging code
and some cosmetic tweaks.
1996-10-05 16:33:05 +00:00
Jordan K. Hubbard
e783f4c9a8
Wait for any stray processes we might be sent while running as init.
...
I have cautious hopes that this will fix the package installer zombie
accumulation problem.
1996-10-05 12:28:36 +00:00
Jordan K. Hubbard
3a781673de
Correct check for ensuring that the network configuration isn't fiddled with
...
when running multi-user.
1996-10-05 12:16:49 +00:00
Jordan K. Hubbard
2ac528a98f
1. Change device probing so that high speed network devices are found before
...
SLIP/PPP devices, putting them before the others in the network device
selection menu.
2. Change "Other" to "URL" so as not to conflict with the keyboard accellerator
for the "OK" button in FTP site selection menu.
3. Detect the NULL last symbol in the name list and initialize the other
members correctly.
1996-10-05 11:56:50 +00:00