domains can be done by the _domain() API variants. UMA also supports a
first-touch policy via the NUMA zone flag.
The slab layer is now segregated by VM domains and is precise. It handles
iteration for round-robin directly. The per-cpu cache layer remains
a mix of domains according to where memory is allocated and freed. Well
behaved clients can achieve perfect locality with no performance penalty.
The direct domain allocation functions have to visit the slab layer and
so require per-zone locks which come at some expense.
Reviewed by: Attilio (a slightly older version)
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
We already clear %RFLAGS.DF on the kernel entry due to the compiler's
ABI requirements.
Suggested by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Hardware already did it for us due to the mask loaded into the
MSR_SF_MASK msr register.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13838
The symbol is just an offset in the hardware TSS structure, it is not
limited to the common_tss instance.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This is a followup to r307903.
struct svm_softc takes more than 200 kilobytes while what we really need
is 3 contiguous pages for I/O permission map and 2 contiguous pages for
MSR permission map. Other physically mapped structures have a size of
a single page, so a proper alignment is sufficient for their correct
mapping.
Thus, only the permission maps are allocated with contigmalloc now,
the softc is allocated with a regular malloc.
Additionally, this commit adds a check that malloc returns memory with the
expected page alignment and that contigmalloc does not fail.
Unfortunately, at present svm_vminit() is expected to always succeed and
there is no way to report an error.
So, a contigmalloc failure leads to a panic.
We should probably fix this.
MFC after: 2 weeks
Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
It does not change anything in the behavior of trap_pfault(), while
eliminating obfuscation of jumping to the code which checks for the
condition reversed of the goto cause. Also avoid force initialize the
rv variable, since it is now only accessed after storing vm_fault()
return value.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13725
The entry must be logged "manually" using TSRAW rather than TSENTER
since PCPU data structures have not yet been initialized and thus
curthread cannot be accessed; &thread0 is what will become curthread
later in hammer_time.
Other MD initialization code should be similarly instrumented in order
to gain visibility into the time spent before entering mi_startup; this
will require some care and testing from people with access to such
hardware.
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
The DTrace fasttrap entry points expect a struct reg containing the
register values of the calling thread. Perform the conversion in
fasttrap rather than in the trap handler: this reduces the number of
ifdefs and avoids wasting stack space for traps that don't involve
DTrace.
MFC after: 2 weeks
This variable should be pure MI except possibly for reading it in MD
dump routines. Its initialization was pure MD in 4.4BSD, but FreeBSD
changed this in r36441 in 1998. There were many imperfections in
r36441. This commit fixes only a small one, to simplify fixing the
others 1 arch at a time. (r47678 added support for
special/early/multiple message buffer initialization which I want in
a more general form, but this was too fragile to use because hacking
on the msgbufp global corrupted it, and was only used for 5 hours in
-current...)
This is better than directly changing PCI configuration space of the
device because it makes the PCI bus aware of the configuration.
Also, the change allows to drop a bunch of code that duplicated
pci_enable_msi() functionality.
I wonder if it's possible to further simplify the code by using
pci_alloc_msi().
ivhd should attach after the root PCI bus and, thus, after the ACPI
Host-PCI bridge off which the bus hangs. This is because ivhd changes
PCI configuration of a PCI IOMMU device that is located on the root bus.
If the bus attaches after ivhd it clears the MSI portion of the
configuration. As a result IOMMU event interrupts would never be
delivered.
For regular ACPI devices the order is calculated as
ACPI_DEV_BASE_ORDER + level * 10
where level is a depth of the device in the ACPI namespace.
I expect the depth of the Host-PCI bridge to be two or three,
so ACPI_DEV_BASE_ORDER + 10 * 10 should be a sufficiently safe order
for ivhd.
This should fix the setup of the AMD-Vi event interrupt when vmm is
preloaded (as opposed to kldload-ed).
This ensures that we can receive further event interrupts.
See the description of the bits in the specification for
MMIO Offset 2020h IOMMU Status Register.
The bits are defined as set-by-hardware write-1-to-clear, same as all
the bits in the status register.
Discussed with: anish
Stop issuing pre-assigned number to enumerate all page table pages,
the assignment is incorrect. Instead automatically calculate the next
unused index. This index in fact does not serve any purpose except to
be unique to satisfy vm_page_grab() interface, we do not look up the
page by the index later.
Reported and tested by: emaste
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
PR: 223906
Differential revision: https://reviews.freebsd.org/D13273
In the linux ENOADATA is frequently #defined as ENOATTR.
The change is required for an xattrs support implementation.
MFC after: 1 week
Discussed with: netchild
Approved by: pfg
Differential Revision: https://reviews.freebsd.org/D13221
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
For FreeBSD/arm64's cloudabi32 support, I'm going to need a TO_PTR() in
this place. Also use it for all of the other source files, so that the
difference remains as minimal as possible.
MFC after: 2 weeks
Ensure that an opening bracket always has a matching closing one.
Ensure that there is always a new-line at the end of a report line.
Also, add a space before the printed event flag.
Reviewed by: anish
The defined bits are the lower bits, not the higher ones.
Also, the specification has been extended to define bits 0:18 and they
all could potentially be interesting to us, so extend the width of the
field accordingly.
Reviewed by: anish
Many 8-byte entries have zero at byte 4, so the second 4-byte part is
skipped as a 4-byte padding entry. But not all 8-byte entries have that
property and they get misinterpreted.
A real example:
48 00 00 00 ff 01 00 01
This an 8-byte ACPI_IVRS_TYPE_SPECIAL entry for IOAPIC with ID 255 (bogus).
It is reported as:
ivhd0: Unknown dev entry:0xff
Fortunately, it was completely harmless.
Also, bail out early if we encounter an entry of a variable length type.
We do not have proper handling for those yet.
Reviewed by: anish
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
In reclaim_pv_chunk(), rotate the pv chunks list so that next
invocations of the reclaim do not scan the same pv chunks that could
not be freed. Only do the rotation when there is no parallel scan,
tracked by active_reclaims counter.
To rotate, move all chunks that are before current iteration marker,
after another marker that is inserted at the list tail on start of the
reclaim.
Reviewed by: alc
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
