Commit Graph

1352 Commits

Author SHA1 Message Date
Jordan K. Hubbard
85e3676076 Match LINT with SC_BAD_FLICKER change.
Submitted by:	Sheldon Hearn <axl@iafrica.com>
1998-09-25 11:00:11 +00:00
Kazutaka YOKOTA
e91db91d4e SC_BAD_FLICKER -> SC_ALT_SEQACCESS
Now supposedly less harmful way of accessing VGA sequencer registers
is default. An alternative, often troublesome, I/O access is optional.

Discussed with: sos, jkh
1998-09-24 13:20:47 +00:00
KATO Takenori
a80a8d7271 Sync with sys/i386/conf/Makefile.i386 revision 1.124. 1998-09-22 16:11:08 +00:00
Mike Smith
26dd997fbe New major for 3dfx driver. 1998-09-21 22:04:07 +00:00
Bruce Evans
5b036e2b3c Fixed missing dependencies of genassym.o, gensetdefs.o and vers.o
on opt_global.h.  This actually matters for genassym.o (it depends
on at least SMP).

Don't undefine KERNEL for compiling genassym.c.  genassym.o really
depends on KERNEL, and the prototype mismatches that required
undefining KERNEL in rev.1.49 no longer exist.

Compile gensetdefs* with the same flags as genassym*.  External
`gen' programs such linux_genassym should also use these flags
(${GEN_CFLAGS}).

Fixed missing dependency generation for gensetdefs.o.  C sources
for external `gen' programs should be added to GEN_CFILES to get
their dependencies generated.

Cleaned up flags definitions and use.  All of ${CFLAGS} is now
passed to mkdep and the assembler (both are actually variants of
${CC} and will ignore the irrelevant flags).
1998-09-21 06:39:11 +00:00
Bruce Evans
641fc5df83 Clean aicasm's lex and yacc generated source files. 1998-09-21 04:41:11 +00:00
Nicolas Souchu
58bcaed08c vpo now compiles with CAM, #!CAM# removed. 1998-09-20 17:15:25 +00:00
KATO Takenori
47d002cf75 Sync with sys/i386/conf/files.i386 revision 1.205. 1998-09-20 10:50:18 +00:00
Justin T. Gibbs
3e82ad76da Re-enable the advansys driver. 1998-09-20 07:20:19 +00:00
Bruce Evans
9547f2c6d9 Remove unused file. It was missing about half the necessary entries. 1998-09-20 06:23:58 +00:00
Bruce Evans
3a049d0356 Removed entries for dead SLICE files.
Removed commented out entries for dead networking files (netccitt etc.).
Uncommented entries for zombie networking files (netns).
1998-09-20 06:17:49 +00:00
Bruce Evans
35b47c4228 Remove vestiges of SLICE code.
Forgotten by:	sos
1998-09-20 06:04:56 +00:00
Jordan K. Hubbard
534484343b Note that we're in BETA status. 1998-09-19 11:45:37 +00:00
Eivind Eklund
7c0daaa801 Make LINT compile and link again after the CAM merge. The little
annoying #!CAM# indicators are used to be clear, in the expectation
that the places they show will be either fixed or diked out reasonably
quickly.

Reviewed by:	ken
1998-09-18 20:17:41 +00:00
Doug Rabson
c6f34b8987 Change version number. 1998-09-18 18:41:49 +00:00
Matt Jacob
3dd37e4387 (requested by gibbs) Remove the SCSI_CAM option (and rework the isp driver
that had depended on it for compilation within or without CAM to use
__FreeBSD_version instead).
1998-09-18 00:46:42 +00:00
Kenneth D. Merry
5623443753 Move SCSI_DELAY and SCSI_CAM from the undocumented options section to the
CAM options section.

Document that SCSI_DELAY is in milliseconds, not seconds.

Tell users that SCSI_CAM is only needed if you've got the QLogic driver in
your kernel.

Reviewed by:	gibbs
1998-09-18 00:01:39 +00:00
Nicolas Souchu
f7d09fba58 vpo comments updated for cam, nlpt suggested instead of lpt 1998-09-17 21:54:17 +00:00
Doug Rabson
9604f809cd Merge with the latest i386 syscons. 1998-09-17 09:38:36 +00:00
Mike Smith
c009fe307d Mark the syscons and pcvt drivers as being allowed to conflict, so that
well-meaning but uneducated users don't exterminate the psm driver in
their zeal to achieve zero conflicts.
1998-09-17 03:15:30 +00:00
KATO Takenori
12629290f5 Sync with sys/i386/isa/files.i386 and options.i386 revisions 1.204 and
1.87, respectively.
1998-09-16 08:37:40 +00:00
Doug Rabson
657d6e769c Change to cam. 1998-09-16 08:22:09 +00:00
KATO Takenori
6b47fe275c Sync with sys/i386/conf/Makefile.i386 revision 1.123. 1998-09-16 08:04:40 +00:00
Justin T. Gibbs
79dadba22a Bump config version. 1998-09-15 21:07:07 +00:00
Søren Schmidt
a8445737e7 Add VESA support to syscons.
Kazu writes:

The VESA support code requires vm86 support. Make sure your kernel
configuration file has the following line.
        options "VM86"
If you want to statically link the VESA support code to the kernel,
add the following option to the kernel configuration file.
        options "VESA"

The vidcontrol command now accepts the following video mode names:
VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600

The VESA_800x600 mode is a raster display mode. The 80x25 text will
be displayed on the 800x600 screen. Useful for some laptop computers.

vidcontrol accepts the new `-i <info>' option, where <info> must be
either `adapter' or `mode'.  When the `-i adapter' option is given,
vidcontrol will print basic information (not much) on the video
adapter. When the `-i mode' option is specified, vidcontrol will
list video modes which are actually supported by the video adapter.

Submitted by:   Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
KATO Takenori
81083f630d Sync with sys/i386/conf/GENERIC, SMP-GENERIC, device.i386, files.i386,
majors.i386 and options.i386 revisions 1.116, 1.13, 1.14, 1.203, 1.49
and 1.86, respectively.
1998-09-15 14:10:56 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
700daf5ea0 sd->da, od is gone, no SCSI control devices.
new pass, xpt, and targ devices.

Nuke no longer used AHC options.
1998-09-15 10:01:14 +00:00
Justin T. Gibbs
bf21c6337f Update for CAM. 1998-09-15 09:59:15 +00:00
KATO Takenori
c17091756f Sync with sys/i386/confMakefile.i386 revision 1.122. 1998-09-15 03:49:43 +00:00
Søren Schmidt
d024c95599 Remove the SLICE code.
This clearly needs alot more thought, and we dont need this to hunt
us down in 3.0-RELEASE.
1998-09-14 19:56:42 +00:00
Jordan K. Hubbard
ac80870e0b Decouple genassym flags from CFLAGS.
Submitted by:	jhay
1998-09-14 11:32:17 +00:00
John Polstra
22d4b0fb41 Add provisions for variant core dump file formats, depending on the
object format of the executable being dumped.  This is the first
step toward producing ELF core dumps in the proper format.  I will
commit the code to generate the ELF core dumps Real Soon Now.  In
the meantime, ELF executables won't dump core at all.  That is
probably no less useful than dumping a.out-style core dumps as they
have done until now.

Submitted by:	Alex <garbanzo@hooked.net> (with very minor changes by me)
1998-09-14 05:36:51 +00:00
Nicolas Souchu
15cc1109dc add immio.c for ZIP+ support 1998-09-13 18:24:38 +00:00
Robert V. Baron
d3459488ae Finish conversion of cfs -> coda 1998-09-13 13:57:59 +00:00
Robert V. Baron
9afcea2f4a All the references to cfs, in symbols, structs, and strings
have been changed to coda.  (Same for CFS.)
1998-09-11 18:50:17 +00:00
Søren Schmidt
6773d00e66 Oops missed a line in the previous commit 1998-09-10 11:23:08 +00:00
Søren Schmidt
a9c5b8d027 Update info on the bt848 driver.
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-09-10 08:20:46 +00:00
Nicolas Souchu
acd5ae9acc Major numbers allocated for generic SMB/I2C i/o 1998-09-09 18:57:59 +00:00
Warner Losh
e8ddcfd6a1 Add dependency for subr_bus.c on bus_if.h and device_if.h so that a make
depend is not required to just build the kernel.

Reviewed by: Doug Rabson
1998-09-09 17:23:25 +00:00
KATO Takenori
2663a4af57 Sync with sys/i386/conf/files.i386 revision 1.202. 1998-09-09 14:39:56 +00:00
KATO Takenori
c792da10e3 Sync with sys/i386/conf/options.i386 revision 1.85. 1998-09-09 14:39:20 +00:00
Bruce Evans
405b59bcb5 Turned on -Wformat -fformat-extensions. -fformat-extensions requires a
-current version of gcc.  Without it, -Wformat would complain about all
the nonstandard %[Dbrz] formats in the kernel.
1998-09-09 10:04:58 +00:00
Justin T. Gibbs
e79363ba53 Reserve character major 104 for the CAM Transport Layer Services device. 1998-09-09 03:07:02 +00:00
Søren Schmidt
eeded4d82e Add new atapi-cd driver that supports atapi CD-R/RW drives.
This is only a stop-gab solution to get atapi burner support into 3.0.
1998-09-08 20:57:47 +00:00
Brian Somers
8aa2558802 Make PCIC_RESUME_RESET an proper option.
My laptop (a CTX Cybernote) needs this.  It claims to have a

  PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
1998-09-08 18:09:51 +00:00
Doug Rabson
feb6634586 Device framework code now declared in MI code. 1998-09-07 07:29:30 +00:00
KATO Takenori
2bfe25d193 Sync with sys/i386/conf/files.i386 revision 1.201. 1998-09-05 02:36:18 +00:00
KATO Takenori
0e28be212a Sync with sys/i386/conf/Makefile.i386 revision 1.121. 1998-09-05 02:35:21 +00:00
Nicolas Souchu
f25c58e005 pcf.c added, support for the Philips PCF8584 I2C bus controller
(this is part of the iicbus system)
1998-09-04 06:06:55 +00:00
Nicolas Souchu
d41c96ee24 Reviewed by: Doug Rabson
Submitted by:	nsouch
I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
Nicolas Souchu
8afa373cc6 Reviewed by: Doug Rabson
Submitted by:	nsouch
Adding I2C and SMB entries to LINT, CONFIGVERS modified in Makefile.i386
1998-09-03 20:58:34 +00:00
Robert V. Baron
41159be768 Pass2 complete 1998-09-02 19:09:53 +00:00
Bruce Evans
1d0de5e557 Add -aout to CFLAGS and LDFLAGS in bsd.kmod.mk, not in
src/lkm/Makefile.inc.  This fixes broken builds of the syscons LKMs
when OBJFORMAT=elf.  Removed src/lkm/Makefile.inc since it became
empty and is worse than useless.
1998-09-02 14:29:09 +00:00
KATO Takenori
a6ccc598a3 Sync with sys/i386/conf/Makefile.i386 revision 1.120. 1998-09-01 07:18:09 +00:00
John Birrell
c155091cc8 Change BINFORMAT to KERNFORMAT and add -aout or -elf to the tool
arguments as appropriate. This is necessary because setting OBJFORMAT=aout
in the makefile doesn't get exported to the environment. I wish our
make could do that!
1998-09-01 00:11:02 +00:00
Søren Schmidt
58dde31aeb Renamed BT848[SG]CAPAREA to BT848_[SG]CAPAREA.
Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal
PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>.
In kernel configuration file add
options OVERRIDE_CARD=2
options OVERRIDE_TUNER=11
options BKTR_USE_PLL

Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-08-31 18:35:06 +00:00
Søren Schmidt
5d0c8abac1 Added Capture Area ioctl - BT848[SG]CAPAREA.
Normally the full 640x480 (768x576 PAL) image is grabbed. This ioctl
allows a smaller area  from anywhere within the video image to be
grabbed, eg a 400x300 image from (50,10).
See restrictions in BT848SCAPAREA.

Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-08-31 18:31:36 +00:00
John Birrell
0cdd2a270f Force OBJFORMAT=aout. 1998-08-31 11:43:26 +00:00
KATO Takenori
b5ecefd598 Sync with sys/i386/conf/Makefile.i386 revision 1.118. 1998-08-28 12:48:38 +00:00
Jordan K. Hubbard
a1d55890a0 Add CFS options to LINT, though commented out for now.
Submitted by:	Robert Baron <rvb@sicily.odyssey.cs.cmu.edu>
1998-08-27 02:37:11 +00:00
David E. O'Brien
a84d40fb46 NULLFS_DIAGNOSTICS and PCVT_SCANSET=2 listed twice. 1998-08-27 01:30:53 +00:00
Søren Schmidt
dd70aa7f52 Add OVERRIDE_CARD to the bktr options list 1998-08-26 12:13:39 +00:00
Mike Smith
0c54141ebe New major number for SR4 streams emulation. 1998-08-24 22:42:17 +00:00
Doug Rabson
2e809930ba Add atomic.s. 1998-08-24 08:48:22 +00:00
Bruce Evans
9478de47f4 Use a relative path to bsd.kern.mk if the relative mk directory exists. 1998-08-24 06:42:26 +00:00
Gary Palmer
6722fe2d35 Add BREAK_TO_DEBUGGER so that config stops whining 1998-08-21 23:43:15 +00:00
Doug Rabson
19df33b637 Add support for TurboChannel alphas (DEC 3000/300 and 3000/500).
Obtained from: NetBSD
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-08-20 08:27:11 +00:00
Bruce Evans
16e164e393 Oops, the previous commit was of a local version. 1998-08-17 16:58:02 +00:00
Bruce Evans
c7e2a13256 FIxed typo (syntax error) in previous commit. 1998-08-17 16:46:33 +00:00
Bill Paul
e30938ce3a Import the (Fast) Etherlink XL driver. I'm reasonally confident in its
stability now. ALso modify /sys/conf/files, /sys/i386/conf/GENERIC
and /sys/i386/conf/LINT to add entries for the XL driver. Deactivate
support for the XL adapters in the vortex driver. LAstly, add a man
page.

(Also added an MLINKS entry for the ThunderLAN man page which I forgot
previously.)
1998-08-16 17:14:59 +00:00
KATO Takenori
1e62449ada Sync with sys/i386/conf/options.i386 revision up to 1.84. 1998-08-10 16:54:09 +00:00
Poul-Henning Kamp
572bfce46d Reserve majors for M-Systems DiskOnChip driver. This driver will be
available directly from M-systems.
1998-08-10 09:06:21 +00:00
Kazutaka YOKOTA
c0fad1a4cf - Added SC_BAD_FLICKER for syscons.
- Added the flag 0x40 (quiet bell) for syscons.
1998-08-10 08:40:27 +00:00
Doug Rabson
8a7b91802a Lots of changes, including:
* Support for AlphaStation 200, 250, 255, 400
* Untested support for UDB, Multia, AXPpci33 (Noname)
* Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata)
* Some minor fixes and improvements to interrupt handling.

Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata)
Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
Jordan K. Hubbard
afc2d1c74e A few misc changes to get the spigot and meteor board working in 3.0.
Submitted by:	Jim Lowe <james@miller.cs.uwm.edu>
1998-08-08 19:26:08 +00:00
Peter Wemm
e0301e5d4b Make ../Makefile.inc handling more consistant to prevent multiple includes
when certain .mk files include other .mk files.  This will remove the
need for multiple include protection in some other makefiles around the
tree (and helps some elf conditionals).
1998-08-08 07:02:08 +00:00
KATO Takenori
cdc2343491 Sync with sys/i386/conf/files.i386 and majors.i386 revisions 1.200 and
1.44, respectively.
1998-08-07 11:52:19 +00:00
Eivind Eklund
b755b88510 Update DPT driver from 1.4.3 to 1.4.5
Submitted by: Simon Shapiro <shimon@simon-shapiro.org>
1998-08-05 00:54:38 +00:00
Brian Somers
c35bda9472 Add driver dgm - for the Digiboard PC/Xem
Submitted by:   "IBS / Andre Oppermann" <andre@pipeline.ch>
DEVFS additions: brian

dgm gets major number 101.
1998-08-04 21:44:09 +00:00
Mike Smith
46f3ff7986 Major ppbus updates from the author.
- ppbus now supports PLIP via the if_plip driver
 - ieee1284 infrastructure added, including parallel-port PnP
 - port microsequencer added, for scripting the sort of port I/O
   that is common with parallel devices without endless calls up and down
   through the driver structure.
 - improved bus ownership behaviour among the ppbus-using drivers.
 - improved I/O chipset feature detection

The vpo driver is now implemented using the microsequencer, leading to
some performance improvements as well as providing an extensive example
of its use.

Reviewed by:	msmith
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00
Doug Rabson
82153dc247 Change load address to 0xfffffc0000300000 to help support AS200. 1998-07-30 08:12:14 +00:00
Bruce Evans
e0e2794cd8 Honor NOSHARED for tools. All tools should be built static for
`make world' to avoid problems with picking up (new) target or (stale)
host shared libraries.

Don't honor -static in LDFLAGS for linking LKMs.  LDFLAGS is not
actually for ld, but we use it anyway, and must prevent -static being
misinterpreted as -s.

Don't hide any of the link steps.
1998-07-29 14:19:48 +00:00
Brian Somers
5c3c780ffa pseudo-device ssc requires su.c (pseudo-device su)
Submitted by: woods@zeus.leitch.com (Greg A. Woods)
PR: 7413
1998-07-28 22:06:16 +00:00
Doug Rabson
515cfabc48 Add KN20AA support.
Add entries for syscons.
1998-07-22 08:24:39 +00:00
Doug Rabson
237064085b Tweaks to stop config(8) warnings and to avoid an unfinished experiment of
mine.

Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-07-22 08:23:26 +00:00
KATO Takenori
fd3ae2d6b0 Sync with sys/i386/conf/files.i386 revision 1.199. 1998-07-21 12:07:02 +00:00
Mike Smith
b16d163da1 Add the 'cs' driver for Crystal Semiconductor CS89x0 devices. This
supports PnP and if_media.  I've been running a slightly older version
here for several weeks now.
Submitted by:	Maxim Bolotin <max@rsu.ru>
1998-07-20 20:00:43 +00:00
Doug Rabson
6a5694427a Tweaks for cross-building from NetBSD/alpha.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-07-15 20:12:54 +00:00
Doug Rabson
28c3132268 Linker script for alpha kernel. 1998-07-15 19:19:24 +00:00
Doug Rabson
52c008e810 Overhaul the spl system so that it actually works properly. 1998-07-12 16:32:10 +00:00
Doug Rabson
bb8a6f725b Define option DEC_EB164 1998-07-12 16:28:09 +00:00
Doug Rabson
8777a8098d Add some bits and pieces for my test box. 1998-07-12 16:26:52 +00:00
KATO Takenori
0faba01ed8 Sync with sys/i386/conf/Makefile.i386 revision 1.117. 1998-07-12 14:30:54 +00:00
Bruce Evans
a872b9bdd0 Removed historical dependencies on `Makefile'. They had rotted to being
mostly for objects that have the fewest dependencies on `Makefile'
(since they were mostly for utilities and objects generated from *.s
and these don't depend on profiling flags).

Give an explicit rule for building vnode_if.o.  This fixes building
it without ${PROF}.

Use .ORDER instead of a stamp file to avoid building vnode_if.[ch]
concurrently.

Removed explicit dependencies that will be generated by `make' (.c.o)
or will be generated by mkdep.

Added missing dependencies of special objects on opt_global.h.

Use ${NORMAL_C} instead of special rules for special objects where
possible.

FIxed dependencies of vers.o.
1998-07-12 10:47:32 +00:00
Bruce Evans
784c3c3465 Removed all traces of PARAM in Makefile.i386. Incremented CONFIGVERS
to reflect the dependency of Makefile.i386 on nothing being put in
PARAM.

Config versioning is too closely coupled with the Makefile.i386.
1998-07-12 09:52:45 +00:00
Bruce Evans
95de6ecfe8 Prepare to handle MAXUSERS as a normal option. 1998-07-12 01:48:14 +00:00
Bruce Evans
bef7db2e66 Moved definition of fscale from param.c to kern_synch.c where it
should always have been (it has no user-servicable parts even at
compile time) and staticized it.
1998-07-11 13:06:41 +00:00
Julian Elischer
e06ccb171b Add ipforward option 1998-07-11 04:46:27 +00:00
Julian Elischer
cdcc2613ac Forgot to register the IPFIREWALL_FORWARD option. 1998-07-06 04:55:22 +00:00
KATO Takenori
1479b9a895 Sync with sys/i386/conf/options.i386 revision 1.82. 1998-07-02 12:40:01 +00:00
Julian Elischer
f8db905cdb Remove unused option 1998-07-02 05:50:57 +00:00
Poul-Henning Kamp
8cb5266728 Add 3 sysctl variables for future use by ps)1_ 1998-06-30 21:25:58 +00:00
Bruce Evans
673796a715 Nuked opt_defunct.h and kern_opt.c. config(8) now generates good enough
warnings about all unknown options.
1998-06-30 14:43:04 +00:00
John-Mark Gurney
b039fc4c34 remove option LINUX as it did nothing, add DEBUG_LINUX to debug the
linux emulation...

(actually moved LINUX to opt_dontuse.h)
1998-06-30 08:40:33 +00:00
John-Mark Gurney
3f139a1a4c move OVERRIDE_TUNER from i386 to general options... it's not i386
specific
1998-06-30 08:32:51 +00:00
John-Mark Gurney
a9e837f479 document options to hardwire GUS irq/dmas... 1998-06-30 08:24:02 +00:00
John-Mark Gurney
e261d589ff document PCI_QUIET that prevents pci from compiling in so many strings 1998-06-30 08:13:27 +00:00
John-Mark Gurney
20f718132d document some VM paging options for cache sizes:
PQ_NOOPT	no coloring
PQ_LARGECACHE	used for 512k/16k cache
PQ_HUGECACHE	used for 1024k/16k cache
1998-06-30 08:01:30 +00:00
John-Mark Gurney
b529c5e67c make NO_SCSI_SENSE a proper option (already documented in LINT) 1998-06-30 07:47:44 +00:00
John-Mark Gurney
a9c94e9b71 document and make EXPORTMFS a new style option 1998-06-30 07:36:33 +00:00
John-Mark Gurney
df394affa2 convert some nfs tunables to options, these are:
NFS_MINATTRTIMO         VREG attrib cache timeout in sec
NFS_MAXATTRTIMO
NFS_MINDIRATTRTIMO      VDIR attrib cache timeout in sec
NFS_MAXDIRATTRTIMO
NFS_GATHERDELAY         Default write gather delay (msec)
NFS_UIDHASHSIZ          Tune the size of nfssvc_sock with this
NFS_WDELAYHASHSIZ       and with this
NFS_MUIDHASHSIZ         Tune the size of nfsmount with this
NFS_NOSERVER            (already documented in LINT)
NFS_DEBUG               turn on NFS debugging

also, because NFS_ROOT is used by very different files, it has been
renamed to opt_nfsroot.h instead of the old opt_nfs.h....
1998-06-30 03:01:37 +00:00
Doug Rabson
14c35d6ca0 Add options for selecting ELF or KLD symbols in DDB. 1998-06-28 01:03:13 +00:00
KATO Takenori
e379d366dd Sync with sys/i386/conf/Makefile.i386 revision 1.115. 1998-06-25 10:49:49 +00:00
Mike Smith
324bac9ffe Oops, add ppc to the 'tty' imask. 1998-06-24 22:01:32 +00:00
Eivind Eklund
1fcddf2eea Fix race condition for creation of vnode_if.c and vnode_if.h.
Exact problem pointed out by: Cyrus Rahman <cr@jcmax.com>
1998-06-24 13:55:32 +00:00
Bruce Evans
abc97a0611 Moved P1003 options from the middle of the devices section to the
end of the main options section.

Turned on documented option OVERRIDE_TUNER.  LINT is primarily
for turning on options, not for documenting them.

Don't list IPFILTER twice (once as broken).
1998-06-21 13:36:53 +00:00
Bruce Evans
df471779ea Round tickadj up. This prevents tickadj from being 0 when HZ > 500,
which makes adjtime(2) useless and confuses xntpd(8) into refusing
to start even when it would use the kernel PLL instead of adjtime().
The result is the same as recommended by tickadj(8), at least when
HZ divides 10^6.  Of course, you wouldn't want to actually use
adjtime() when HZ is large.  In the silly boundary case of HZ == 10^6,
tickadj == tick == 1 so the clock stops while adjtime() is active.
1998-06-21 12:22:35 +00:00
KATO Takenori
a47dddaf2d Sync with sys/i386/conf/Makefile.i386 revision 1.114. 1998-06-17 16:30:53 +00:00
Bruce Evans
afafca8bcb Don't generate declarations for isa device structs in "ioconf.h".
Don't generate declarations for isa interrupt handlers at all.
Isa interrupt handlers are now declared in <i386/isa/isa_device.h>
but should be converted take a `void *' arg and staticized as
soon as possible.

Updated CONFIGVERS.  New configs are very incompatible with
previous versions.
1998-06-17 15:16:53 +00:00
KATO Takenori
14f155eeb0 Sync with sys/i386/isa/conf/files.i386 revision 1.198. 1998-06-17 09:26:23 +00:00
Bruce Evans
2ebd0c3795 Backed out rev.1.183, which had nothing to do with its log message.
It was to support a half-baked optimization of certain long long
divisions in gcc-2.8 and/or egcs.  We now avoid these divisions.
1998-06-16 14:55:27 +00:00
Doug Rabson
7066d59cef Oops, wrong file again. 1998-06-14 17:35:55 +00:00
Doug Rabson
99d11cde56 Major changes to the generic device framework for FreeBSD/alpha:
* Eliminate bus_t and make it possible for all devices to have
  attached children.

* Support dynamically extendable interfaces for drivers to replace
  both the function pointers in driver_t and bus_ops_t (which has been
  removed entirely.  Two system defined interfaces have been defined,
  'device' which is mandatory for all devices and 'bus' which is
  recommended for all devices which support attached children.

* In addition, the alpha port defines two simple interfaces 'clock'
  for attaching various real time clocks to the system and 'mcclock'
  for the many different variations of mc146818 clocks which can be
  attached to different alpha platforms.  This eliminates two more
  function pointer tables in favour of the generic method dispatch
  system provided by the device framework.

Future device interfaces may include:

* cdev and bdev interfaces for devfs to use in replacement for specfs
  and the fixed interfaces bdevsw and cdevsw.

* scsi interface to replace struct scsi_adapter (not sure how this
  works in CAM but I imagine there is something similar there).

* various tailored interfaces for different bus types such as pci,
  isa, pccard etc.
1998-06-14 13:46:10 +00:00
Doug Rabson
dd08c7e27d I accidentally committed the wrong file, sorry. 1998-06-10 17:54:37 +00:00
Doug Rabson
897cd717a5 Add initial support for the FreeBSD/alpha kernel. This is very much a
work in progress and has never booted a real machine.  Initial
development and testing was done using SimOS (see
http://simos.stanford.edu for details).  On the SimOS simulator, this
port successfully reaches single-user mode and has been tested with
loads as high as one copy of /bin/ls :-).

Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
Bruce Evans
afba897ff2 Fixed `make depend', which I broke here about a month ago by moving
the null default for `depend' from bsd.dep.mk to bsd.obj.mk.
bsd.kmod.mk included these files in a bad order, so it picked up
the null default.
1998-06-09 02:55:40 +00:00
Bruce Evans
ea0be99955 Updated yet another ioctl, and put wst in LINT to inhibit further bitrot. 1998-06-08 06:18:53 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
KATO Takenori
060b58da67 Make LINE30 a new style option. 1998-06-06 05:25:37 +00:00
KATO Takenori
0f66fe0109 Make BS_TARG_SAFEMODE a new style option. 1998-06-06 05:21:56 +00:00
Julian Elischer
e256a933a8 Reverse the default sense of the IPFW/DIVERT reinjection code
so that the new behaviour is now default.
Solves the "infinite loop in diversion" problem when more than one diversion
is active.
Man page changes follow.

The new code is in -stable as the NON default option.
1998-06-05 22:40:01 +00:00
Poul-Henning Kamp
5db3b83128 Add minimum driver for XC6200 based cards. Currently it knows about
the HOT1 from www.vcc.com.
1998-05-30 18:28:12 +00:00
Poul-Henning Kamp
e4062700c2 100 xrpu Xilinx Reprogrammable Processing Unit 1998-05-29 08:51:34 +00:00
Julian Elischer
bb60f459a0 Add optional code to change the way that divert and ipfw work together.
Prior to this change, Accidental recursion protection was done by
the diverted daemon feeding back the divert port number it got
the packet on, as the port number on a sendto(). IPFW knew not to
redivert a packet to this port (again). Processing of the ruleset
started at the beginning again, skipping that divert port.

The new semantic (which is how we should have done it the first time)
is that the port number in the sendto() is the rule number AFTER which
processing should restart, and on a recvfrom(), the port number is the
rule number which caused the diversion. This is much more flexible,
and also more intuitive. If the user uses the same sockaddr received
when resending, processing resumes at the rule number following that
that caused the diversion. The user can however select to resume rule
processing at any rule. (0 is restart at the beginning)

To enable the new code use

option	IPFW_DIVERT_RESTART

This should become the default as soon as people have looked at it a bit
1998-05-25 10:37:48 +00:00
KATO Takenori
8c1bd9897c Fixed missing semicolon and added space before semicolon.
Noticed by:	Toshikazu Kaho <kaho@elam.kais.kyoto-u.ac.jp>
1998-05-25 09:57:34 +00:00
Jordan K. Hubbard
0ef4189616 Add CVS option
Submitted by:	Robert Baron <rvb@sicily.odyssey.cs.cmu.edu>
1998-05-24 01:29:52 +00:00
Jordan K. Hubbard
49ba456b21 Remove two CODA entries by request.
Submitted by:	Robert Baron <rvb@sicily.odyssey.cs.cmu.edu>
1998-05-24 01:28:56 +00:00
KATO Takenori
a85be450c5 Sync with sys/i386/conf/Makefile.i386 revision 1.113. 1998-05-23 07:45:54 +00:00
Eivind Eklund
3933c622cd Move __FreeBSD_version from src/sys/conf/newvers.sh to
src/sys/sys/param.h, to facilitate access from the kernel.  This make
it possible to do outside kernel development and have it actually work
properly.
1998-05-21 19:21:46 +00:00
Bill Paul
e21faf3e33 And entries for ThunderLAN driver. 1998-05-21 03:22:20 +00:00
Bill Paul
c24476e32e Add entry for ThunderLAN driver to files. 1998-05-21 03:21:34 +00:00
Eivind Eklund
94610ec47e Back out previous commit - it breaks when called from 'buildworld' :-(
(Damn, I wanted that in the -snap).
1998-05-20 20:54:10 +00:00
Eivind Eklund
a5eed7b873 Move __FreeBSD_version into <sys/param.h> (with automated duplication
to <osreldate.h>).  This allow kernel drivers access to it.

Approved by:	-current
1998-05-20 20:35:42 +00:00
Julian Elischer
0346e0fe04 Change the description of where to get the Soft Updates files. 1998-05-19 23:23:09 +00:00
David Greenman
1f91d8c563 Added fast IP forwarding code by Matt Thomas <matt@3am-software.com> via
NetBSD, ported to FreeBSD by Pierre Beyssac <pb@fasterix.freenix.org> and
minorly tweaked by me.
This is a standard part of FreeBSD, but must be enabled with:
"sysctl -w net.inet.ip.fastforwarding=1" ...and of course forwarding must
also be enabled. This should probably be modified to use the zone
allocator for speed and space efficiency. The current algorithm also
appears to lose if the number of active paths exceeds IPFLOW_MAX (256),
in which case it wastes lots of time trying to figure out which cache
entry to drop.
1998-05-19 14:04:36 +00:00
Poul-Henning Kamp
58067a9909 Make the size of the msgbuf (dmesg) a "normal" option. 1998-05-19 08:58:53 +00:00
Dag-Erling Smørgrav
6110161faa Spotted a misplaced comma in my previous patch. 1998-05-16 14:10:12 +00:00
Dag-Erling Smørgrav
276756a441 Typo nits in SUIDDIR comment (removed some parentheses, moved some
commas, replaced "partition" with "filesystem", reformatted the
paragraph)
1998-05-16 14:08:31 +00:00
Garrett Wollman
98271db4d5 Convert socket structures to be type-stable and add a version number.
Define a parameter which indicates the maximum number of sockets in a
system, and use this to size the zone allocators used for sockets and
for certain PCBs.

Convert PF_LOCAL PCB structures to be type-stable and add a version number.

Define an external format for infomation about socket structures and use
it in several places.

Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through
sysctl(3) without blocking network interrupts for an unreasonable
length of time.  This probably still has some bugs and/or race
conditions, but it seems to work well enough on my machines.

It is now possible for `netstat' to get almost all of its information
via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00