the following description in RFC2461:
AdvSendAdvertisements
A flag indicating whether or not the router sends
periodic Router Advertisements and responds to
Router Solicitations.
Default: FALSE
Note that AdvSendAdvertisements MUST be FALSE by
default so that a node will not accidentally start
acting as a router unless it is explicitly
configured by system management to send Router
Advertisements.
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 1 week
Make the default setting YES for now to get some experience with it.
Note: If people starts seeing disk errors because of this then it
should not be backed.
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
Note that "right" in this case is not universally recognized, but
NTP-practittioners as opposed to theoretians generally agree that
getting "inside the window" using ntpdate is TRTTD on PC hardware.
PR: 25514
Submitted by: Chris Johnson <cjohnson-pr@palomine.net>
very specific scenarios, and now that we have had net.inet.tcp.blackhole for
quite some time there is really no reason to use it any more.
(second of three commits)
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
Xircom CreditCard Netwave cnw
Intel PRO/Wireless 2011 (PRISM II) wi
3COM 3CRWE737A (PRISM II) wi
Note: I've had some reports that the latter two cards work, but I've not
been able to get them to work for me.
enable all harvesting options by default since having them on for
devices not present doesn't hurt anything. Leave them on by default
since for the most part they are not producing noticable slowdown,
and are about to get a lot more efficient.
Re-order part of the cheesy entropy process in preparation for
its complete removal.
during the boot process. We're turning it on by default, based on the
actual presence of a configured ethernet card, and/or ppp/tun devices.
Of course, it's easy to disable in rc.conf.
and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and
'3dnow' MACHINE_CPU tags as appropriate. In the near future this will
be used to control various ports which have MMX/3dNow optimizations,
instead of the ad-hoc methods currently used.
Reviewed by: peter
libssl, for example), and hide it behind a make.conf option,
WANT_OPENSSL_MANPAGES, instead of having it commented out. We still can't
install these by default because of clobbering of a number of system
manpages with the same name, but they're there for people who want them.
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
users should be configuring via m4 now. If set, use m4 to create the .cf
file. Also, if either SENDMAIL_MC or SENDMAIL_CF is set, 'make install' or
'make distribution' in src/etc/sendmail/ will install the appropriate .cf as
/etc/mail/sendmail.cf. This fixes some mergemaster problems.
PR: conf/13016
through the use of a new build directive, MACHINE_CPU, which contains a
list of the CPU generations/features for which optimizations are desired.
This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class
CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not
defined (namely, the lowest common denominator CPU we support for each
architecture). Currently this is i386 for the i386 architecture and ev4
for the alpha. sys.mk also sets the variable as a last resort for
consistency with MACHINE_ARCH and bootstrapping from very old versions of
make.
Benchmarks show a significant speed increase even in the i386 case, with
additional improvements for i586 and i686 systems. For maximum performance
define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: current
it at boot time closer to the way we want it to be in the final version.
* Move the default directory to /var/db/entropy
* Run the entropy saving cron job every 11 minutes. This seems
to be a better default, although still bikeshed material.
* Feed /dev/random some cheesy "entropy" from various commands
and files before the disks are mounted. This gives /dev/random
a better chance of running without blocking early.
* Move the reseeding with previously stored entropy to the point
immediately after the disks are mounted.
* Make the harvesting script a little safer in regards to the
possibility of accidentally overwriting something other
than a regular file.
it can be used to reseed at boot time. This will greatly increase
the chances that there will be sufficient entropy available at
boot time to prevent long delays.
For /etc/rc, remove the vmstat and iostat runs from the attempt
to provide some cheesy randomness if the files fail, since
those programs are dynamically linked, and ldd seems to want
some randomness to do its magic.
Guidance and parameters for this project were provided by
Mark Murray, based on the requirements of the Yarrow
algorithm. Some helpful suggestions for implementation
(including the tip about iostat and vmstat) were provided
by Sheldon Hearn. All blame for problems or mistakes is
mine of course.
multifunction cards and I recieved reports that the card does not
workd by `config auto'. (MFPAO)
o Remove static assign of the IRQ number.
o Remove two duplicated entries.
o Join some entries using regex and fixed matching order problem.
These changes for boot.flp.
Suggested by: sanpei
require the addition of flag 0x80000 to their config line in
pccard.conf(5). This flag is not optional. These Linksys cards will
not be recognized without it.
Reviewed by: imp, iwasaki
from "PCMCIA SCSI MBH1040" to "PCMCIA SCSI MBH10401" "01". They are
based on the spc driver.
This will fix the conflicts of entry with REX-5536AM, REX-9836A,
and ICM PSC-2401 ("MBH10404" ones) which are based on stg driver.
The problem was pointed out in bsd-nomads several times since PAO2 days.
-Comment out the entry for "MBH10401" ones. The spc driver is
not supported yet.
-Add more comment about cards which has broken CIS
(some cards which has tuple of "PCMCIA SCSI MBH10404" "01").
Reported by: takachan@running-dog.net, y-nakaga@nwsl.mesh.ad.jp,
yuki@dayo.ne.jp
Obtained from: discussion in bsd-nomads mailing list
ENABLE_SUID_SSH being defined reenable it for those that want it.
This follows discussion favoring the change from September. It
is not usually necessary to be setuid root, possibly less safe,
and less convenient (cannot use $HOSTALIASES, for example).
Submitted by: jedgar
cosmetic changes
use /etc/pccard_ether for Xircom CreditCard Netwave
and 3Com Corporation" "3C562" (BUT NOT SUPPORTED).
fix `card line' of RATOC REX-5572 (as SCSI only)
use `config auto' for RATOC REX-5536AM, REX-9836A,
ICM PSC-2401 SCSI
- rtsol should be work for only one interface
- new variable ipv6_defaultrouter is added
- option name of rtadvd in comment are corrected
- ipv6_firewall_enable, ipv6_firewall_type, ipv6_firewall_script,
ipv6_firewall_logging are added to introduce rc.firewall6.
IPv6 firewall rule is just starting point and should be brushed up.
This commit includes PR18621, PR21694, PR22051.
PR: conf/18621, conf/21694, conf/22051
Reviewed by: asmodai
used in lower layer (scsi_low.c).
The flag of ncv for KME KXLC004 was chaged from 0x1 to 0x100.
The flag of nsp for PIO mode was chaged from 0x1 to 0x100.
This confilcted with the entry of non PIO mode.
If you want to use them in PIO mode comment out entry of the non PIO mode
and uncommnet the PIO mode entry.
and stg drivers. Also all config indexes for these cards are changed
to auto.
Note, still if you would like to use cards which has a comment;
# (Do not put this entry under Bustoaster)
you need some quick hack. Uncomment the entry above.
Reviewed by: sanpei@FreeBSD.org
brought them to BSDcon and gratiously allowed me to test each one with
the wireless setup here. In addition, support another CF card which
YAMAMOTO-san also brought.
Also add a Lexar CF card which didn't work with auto on many laptops.
the 'ifconfig ifN delete' into pccard_ether under the 'stop'
function.
In addition start dhclient with a pid file based on the interface
name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient
(or dhcpc) process when the card is removed.
the appropriate documentation added to rc.conf(5). If all goes well
with this over the next few weeks, the PR will be closed with the
pullup of patches back to 4-STABLE.
PR: 20202
Submitted by: Gerhard Sittig <Gerhard.Sittig@gmx.net>
Reviewed by: Darren Reed <darrenr@freebsd.org>
Approved by: Darren Reed <darrenr@freebsd.org>
Obtained from: Gerhard Sittig <Gerhard.Sittig@gmx.net>
All periodic sub-scripts <larf> now have their return codes interpreted
by periodic(8). Output may be masked based on variable values in
periodic.conf.
It's also now possible to email periodic output to arbitrary addresses,
or to send it to a log file, examples of which can be found in
newsyslog.conf.
The upshot of it all should be no discernable changes to the default
behaviour of periodic(8).
PR: 21250
-- Unknown
Now that the RSA algorithm is released into the public domain, build
librsaintl by default unless NO_RSAINTL is set in make.conf.
The native OpenSSL implementation of RSA is much faster, doesn't have
an artificial keysize limitation, has 30% fewer calories and tastes great!
cached when not in use. This changes the FreeBSD default from 30 minutes
to 5 minutes. JKH was the one that added the override to amd_flags, but
there was no reason given other to serve as an example of what could be
done.
IPX folks a fighting chance of figuring this out themselves. I can't
work out how to document this carefully in rc.conf(5), but this ought
to close the PR.
PR: 17904
Reported by: John Gelnaw <jeg@hawk.circa.ufl.edu>
SUPFLAGS when a 'make update' is run. This means that the supfile
doesn't need to be edited because the -h will override the
CHANGE_THIS.FreeBSD.org host.
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
time, and this is used to reseed the random number generator at
boot time.
NOTE - this has no hope of working if you halt(); you need to
execute rc.shutdown to get the entropy stash.
- Remove unit numbers in config lines.
- Remove all of logger lines and add logstr lines for some cards. This
changes reduced file size from 84k to 45k.
- Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove
which haven't merge from PAO yet.
- Cosmetic changes.
MAKE_foo for things like MAKE_KERBEROS etc. Use that. I managed to
confuse myself last time and made make.conf different to the code. ;-(
Reported by: Jun Kuriyama <kuriyama@FreeBSD.org>
Seems to work great in the type II cf<->pccard adapter that came with
the card. Others have reported with different chipsets for the pccard
bridge that additional support is needed to make this card work with
the 3.3 volts it needs.
o The Shining PMIDE-ASC card is also used in Road Warrior's Bullet Drive, so
add that to the comments.
o Eiger Lab's fujitsu based ethernet card: EPX-10BT (thanks to Ryan Losh for
donating the card to the cause).
o Add place holder entry for the 3Com Megahertz 3CXEM556. It doesn't work
yet, but that will change in time.
produced human-readable output. I like this, but it's certainly not
something to change willy-nilly without discussion. Revert to -k.
Anyway, the new variable allows folks to pick any units flag that
fits their fancy.
the command-line arguments to be used for the call to df(1) when
daily_status_disks_enable is set to YES.
The name of the new variable was chosen by the maintainer of our
periodic hierarchy, Brian Somers.
PR: 19631
The only change in the default functionality should be that
the output reports are slightly more verbose WRT files deleted.
Not objected to by: freebsd-arch
