This is a split merge because of non-uniform licensing of the DTC package
contents and the way these components will be used in the FreeBSD environment.
The original DTC package is composed of the following two major pieces:
1. sys/contrib/libfdt (BSD [dual] license)
2. contrib/dtc (GPLv2)
The libfdt component is going to be shared in all aspects of the environment:
- /boot/loader
- kernel
- dtc (the device tree compiler proper, userspace tool)
The Makefiles are leftovers from the copies and should live in usr.sbin/zic/*
From usr.sbin/zic:
The sources are from a vendor contributed source, therefore should
live in contrib/tzcode/zic.
on mips. Its not fully done yet but its a start.
Obtained from: JC - c.jayachandran@gmail.com
M gnu/usr.bin/gdb/kgdb/trgt_mips.c
M gnu/usr.bin/gdb/arch/mips/init.c
M gnu/usr.bin/gdb/arch/mips/Makefile
M gnu/usr.bin/Makefile
M contrib/gdb/gdb/mips-tdep.h
- Include a cpasswd script performing the same mechanisms as the cvpasswd
utility from CVSup.
PR: bin/114129
Submitted by: Petar Zhivkov Petrov <pesho.petrov -at- gmail.com>
MFC after: 1 month
Also remove upper 16bits which always seem to be 0xFFFF. We don't
allocate more than 64KB buffer anyway.
This change make smbutil work on sparc64.
Reviewed by: marius, bp
Approved by: bp
Just like rlogind, there is no need to change the ownership of the
terminal during shutdown anymore. Also don't call logwtmp, because the
login(1)/PAM is responsible for doing this. Also use SHUT_RDWR instead
of 2.
libopie includes both <utmp.h> and <utmpx.h> in this case and uses some
#defines to let the code use struct utmpx and its utility functions.
We'd better not include <utmp.h> here, because maybe it will not be
present in the future.
- Make one-true-awk respect locale's collating order in [a-z]
bracket expressions, until a more complete fix (like handing
BREs) is ready.
- Don't require a space between -[fv] and its argument.
r194519 | gonzo | 2009-06-19 17:28:26 -0600 (Fri, 19 Jun 2009) | 3 lines
- set -mabicalls and -msoft-float as a default in order to
simplify building ports
Server Return mode, where not all packets would be visible to the load
balancer or gateway.
This commit should be reverted when we merge future pf versions. The
benefit it would provide is that this version does not break any existing
public interface and thus won't be a problem if we want to MFC it to
earlier FreeBSD releases.
Discussed with: mlaier
Obtained from: OpenBSD
Sponsored by: iXsystems, Inc.
MFC after: 1 month
Instead of constantly calling the mibII_idle function when the server is not busy
call the function only once every 10 seconds to avoid bsnmpd constantly doing
gettimeofday syscalls. Make the idle polling interval confugurable via
begemotIfDataPoll.
Reported and tested by: misho (at) aitbg (dot) com
Oked by: harti
MFC after: 1 week
One of the things I really want to do, is to get rid of the limitations
of our current utmp(5) mechanism:
- It only allows 8 byte TTY device names.
- The hostname only allows 16 bytes of storage.
I'm not a big fan of <utmpx.h>, but I think we should at least try to
add parts of it. Unfortunately we cannot implement <utmpx.h>, because we
miss various fields, such as ut_id, ut_pid, etc. The API provided by
libulog shares some similarities with <utmpx.h>, so it shouldn't be too
hard to port these applications eventually. In most simple cases, it
should just be a matter of removing the ulog_ prefix everywhere.
As a bonus, it also implements a function called ulog_login_pseudo(),
which allows unprivileged applications to write log entries, provided
they have a valid file descriptor to a pseudo-terminal master device.
libulog will allow a smoother transition to a new file format by adding
a library interface to deal with utmp/wtmp/lastlog files. I initially
thought about adding the functionality to libutil, but because I'm not
planning on keeping this library around forever, we'd better keep it
separated.
Next items on the todo list:
1. Port applications in the base system (and ports) to libulog, instead
of letting them use <utmp.h>.
2. Remove <utmp.h>, implement <utmpx.h> and reimplement this library on
top.
3. Port as many applications as possible back to <utmpx.h>.
Scrt1.o instead of crt1.o, since the later is built as non-PIC.
Separate i386-elf crt1.c into the pure assembler part and C code,
supplying all data extracted by assembler stub as explicit parameters [1].
Hide and localize _start1 symbol used as an interface between asm and
C code.
In collaboration with: kan
Inspired by: PR i386/127387 [1]
Prodded and tested by: rdivacky [1]
MFC after: 3 weeks
related to DNSSEC validation on a resolving name server that allows
access to untrusted users. If your system does not fall into all 3 of
these categories you do not need to update immediately.
This patch or something similar will likely be included in a future
BIND release.
PR: bin/138061
Submitted by: Michael Baker <michael.baker@diversit.com.au>
Original patch submitted by: Volker <volker@vwsoft.com>
Patch reviewed and tweaked by: ISC
Pull upstream patch to fix ee(1) crash when received SIGWINCH:
modify _nc_wgetch() to check for a -1 in the fifo, e.g., after a
SIGWINCH, and discard that value, to avoid confusing application
(patch by Eygene Ryabinkin, FreeBSD bin/136223).
PR: 136223
Submitted by: Eygene Ryabinkin
Obtained from: ncurses-5.7-20091024 snapshot
MFC after: 3 days
on "i386". Doing it in the compiler is deemed to be less fragile then
attempting to provide a default -march setting via bsd.cpu.mk. FreeBSD
itself has not supported plain 386 CPUs since 5.x.
Suggested by: kan
Requested by: rdivacky
MFC after: 1 month
is closed.
Diagnosed by Ted Anderson:
New signal queuing logic was introduced in 6.15 and allows the signal handlers
to be run explicitly by calling handle_pending_signals, instead of
immediately when the signal is delivered. This function is called at
various places, typically when receiving a EINTR from a slow system call
such as read or write. In the pty exit case, it was called from xwrite,
called from flush, while printing the "exit" message after receiving EOF
when reading from the pty (note that the read did not return EINTR but
zero bytes, indicating EOF). The SIGHUP handler, phup(), called
rechist, which opened the history file and began writing the merged
history to it. This process invoked flush recursively to actually write
the data. In this case, however, the flush noticed it was being called
recursively and decided fail by calling stderror.
My conclusion was that the signal was being handled at a bad time. But
whether to fix flush not to care about the recursive call, or to handle
the signal some other time and when to handle it, was unclear to me.
However, by adding an extra call to handle_pending_signals, just after
process() returns to main(), I was able to avoid the truncated history
after network outages and similar failures. I verified this fix in
version 6.17.
Approved by: ed (mentor)
MFC after: 1 week
This has been considered as a security hole on some specialized ml,
but currently the secteam@ doesn't consider that way.
Reviewed by: emaste, des
Sponsored by: Sandvine Incorporated
MFC after: 3 days
used here for a long time and needs their header in anycase.
2) Add (unsigned char) casts to more ctype macros.
3) Simplify menu input handling using ctype instead of range unguarded
hardcoded tricks.
- Support for IPv6 transport for AS lookup.
- Introduce $RA_SERVER to set whois server.
- Support for 4 byte ASN.
- ANSIfy function declaration in as.c.
Tested by: IHANet folks.
that takes into account the width of the largest CPU ID. On systems with
> 10 CPUs the labels for the first 10 CPUs were not lined up properly
otherwise.
Approved by: re (kib)
MFC after: 1 week
addresses several minor issues:
- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
- Fix build on Linux.
- Fix printing of class masks in the audump tool.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Approved by: re (kib)
Major changes from v429:
* Don't pass "-" to non-pipe LESSOPEN unless it starts with "-".
* Allow a fraction as the argument to the -# (--shift) option.
* Fix highlight bug when underlined/overstruck text matches at end of line.
* Fix non-regex searches with ctrl-R.
Approved by: re (kensmith, kib)
Receipt of a specially-crafted dynamic update message may
cause BIND 9 servers to exit. This vulnerability affects all
servers -- it is not limited to those that are configured to
allow dynamic updates. Access controls will not provide an
effective workaround.
More details can be found here: https://www.isc.org/node/474
All BIND users are encouraged to update to a patched version ASAP.
Approved by: re (re -> SO -> dougb)
of just blowing up. A very similar change to this exists which is
GPLv3 licensed, this is my own change.
This problem was triggered by running the Boost regression tests.
See also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=31899
Reviewed by: luigi
Approved by: re (kib)
contrib/openbsm and a subset also imported into sys/security/audit.
This patch release addresses several minor issues:
- Fixes to AUT_SOCKUNIX token parsing.
- IPv6 support for au_to_me(3).
- Improved robustness in the parsing of audit_control, especially long
flags/naflags strings and whitespace in all fields.
- Add missing conversion of a number of FreeBSD/Mac OS X errnos to/from BSM
error number space.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
Approved by: re (kib)
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
o add missing Status and Reason codes
o parse/display Action frames
o parse/display Mesh data frames
o parse/display BA frames
Reviewed by: rpaulo
Approved by: re (kib)
/boot/kernel/hptrr.ko
/etc/mail/*.cf
/lib/libcrypto.so.5
/usr/bin/ntpq
/usr/sbin/amd
/usr/sbin/iasl
/usr/sbin/ntpd
/usr/sbin/ntpdate
/usr/sbin/ntpdc
There does not appear to be any purpose to having these timestamps, and
they have the irritating consequence that the aforementioned files will
be different every time they are rebuilt.
After this commit, the only remaining build timestamps are in the kernel,
the boot loaders, /usr/include/osreldate.h (the year in the copyright
notice), and lib*.a (the timestamps on all of the included .o files).
Reviewed by: scottl (hptrr), gshapiro (sendmail), simon (openssl),
roberto (ntp), jkim (acpica)
Approved by: re (kib)
changes from the 9.6.1rc1 version. The first 2 only affect DNSSEC.
named could incorrectly delete NSEC3 records for
empty nodes when processing a update request.
Accept DS responses from delegation only zones.
"delegation-only" was not being accepted in
delegation-only type zones.
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
even if some appear to have (partially) corrupted stack traces.
E.g. kernel crashdumps typically have stack weirdness at
userland-kernel boundary.
Obtained from: vendor/upstream (CVS rev 1.118 of stack.c)
Reviewed by: emaste
Approved by: jhb
permanent solution for 9.6.1-release.
"My suggestion is to remove the whole attribute construct.
It only suppresses a warning when a function is unused. In this case
the function is defined as inline, so it's not causing a warning when
not used."
Submitted by: marcel
lots of new features compared to 9.4.x, including:
Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.
lots of new features compared to 9.4.x, including:
Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.
ipfilter tables via http by the user-level ippool utility. Previously
the 1024-byte buffer used to store a http request coudld easily overflow
if the length of the hostname part of the url passes exceeded 496 bytes. [1]
- Use snprintf to prevent possieble buffer overflows in future. [2]
- Do not try to close the descriptor twice on failure. [2]
Reported by: Maksymilian Arciemowicz <cxib@securityreason.com> [1]
Obtained from: NetBSD CVS [2]
MFC after: 2 weeks
This version is now licensed under a 2-clause BSD license, instead of
the Artistic license. I've reverted a lot of local modifications we made
to ee, because they have been integrated upstream as well.
Only local modifications include:
- $FreeBSD$ ID.
- Pathname to init.ee.
- catopen() call, to honor LC_MESSAGES instead of LANG.
To keep SVN happy, I'm putting an application/octet-stream mime type on
the KOI8 translations.
Reviewed by: current@
The source file, manual page and English translation are now directly
obtained from the contrib/ directory. This makes it a lot easier to
merge a newer version of ee(1) into the tree.
Thanks to: des and jhb
SIGN" instead of U+002D "HYPHEN-MINUS". This is unfortunate for two
reasons: 1) this is not the character which is actually used on the
command line, and 2) it makes it impossible to search a man page for a
specific command-line option.
This patch fixes this, but there are other unresolved issues, such as
confusion between -, \- and hy: while the latter is always (and only)
used for hyphenation, both - and \- are used for negation and
subtraction, and \- is used for command-line options and sometimes
also for parenthesis. IMHO, the correct Unicode characters are:
- hyphenation: either U+2010 or U+00AD, most likely the former (the
latter is the so-called soft hyphen, used to indicate a point at
which a text processor is allowed to hyphenate a word)
- negation and subtraction: U+2212
- parenthesis: in English, U+2214, with spaces suppressed before and
after; in some others (such as Norwegian), U+2213 with spaces
retained.
- command-line options: U+002D, because that is what is actually used
on the command line.
However, fixing this would require extensive modifications to (at least)
the doc and man macro sets...
MFC after: 1 week
