We have to ensure that we don't link any instrumented object files
into rescue as it is a static executable and static binaries can't
use the sanitizer runtime.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D31044
When invoked as "ping6", ping will now attempt to use ICMPv6 for hostnames
that resolve both IPv4 and IPv6 addresses.
Reviewed by: bz, manu
MFC-With: r368045
Differential Revision: https://reviews.freebsd.org/D27384
There is now a single ping binary, which chooses to use ICMP or ICMPv4
based on the -4 and -6 options, and the format of the address.
Submitted by: Ján Sučan <sucanjan@gmail.com>
Sponsored by: Google LLC (Google Summer of Code 2019)
MFC after: Never
Differential Revision: https://reviews.freebsd.org/D21377
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
ld.bfd in particular requires -lm to come after libifconfig on the
command line when linking rescue.
Reviewed by: freqlabs, adrian
Differential Revision: https://reviews.freebsd.org/D26258
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
libifconfig_sfp.h provides an API in libifconfig for querying SFP module
properties, operational status, and vendor strings, as well as descriptions
of the various fields, string conversions, and other useful helpers for
implementing user interfaces.
SFP module status is obtained by reading registers via an I2C interface.
Descriptions of these registers and the values therein have been collected
in a Lua table which is used to generate all the boilerplace C headers and
source files for accessing these values, their names, and descriptions.
The generated code is fully commented and readable.
This is the first use of libifconfig in ifconfig itself. For now, the
scope remains very limited. Over time, more of ifconfig will be replaced
with libifconfig.
Some minor changes to the formatting of ifconfig output have been made:
- Module memory hex dumps are indented one extra space as a result of using
hexdump(3) instead of a bespoke hex dump function.
- Media descriptions have an added two-character short-name in parenthesis.
- QSFP modules were incorrectly displaying TX bias current as power. Now
TX channels display bias current, and this change has been made for both
SFP and QSFP modules for consistency.
A Lua binding for libifconfig including this functionality is implemented
but has not been included in this commit. The plan is for it to be
committed after dynamic module loading has been enabled in flua.
Reviewed by: kp, melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25494
When the OpenBSD dhclient was brought in 14 years ago, we stopped
supporting building a reduced sized dhclient, yet retained the options
here. Also, the OpenBSD dhclient doesn't need lint defined, so it can
go too.
The rescue binary is built statically via the Makefile generated by
crunchgen, but that does not trigger other shared/static logic in
bsd.prog.mk - in particular disabling retpolineplt with static linking.
PR: 233336
Reported by: Charlie Li
Sponsored by: The FreeBSD Foundation
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated. Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.
Discussed with: bde (who does not like the removal)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
I meant for the line that conditionally added in /usr/bin/nc support to
be `+=', not `=`. This restores hardlinks for all programs in usr.bin
specified before nc(1), e.g., bunzip2 and tar.
Reported by: Andrzej Tobola <ato@iem.pw.edu.pl>
Submitted by: Scott Allendorf <scott-allendorf@uiowa.edu>
Pointyhat to: ngie
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Transition to SRCTOP. Also, standardize of {} instead of () variable
deliminators while I'm here.
Differential Revision: https://reviews.freebsd.org/D9932
Sponsored by: Netflix
Silence On: arch@ (twice)
Trivial oversight missed in r314240 cleanup because I enable these knobs on
my test machines.
MK_INET6_SUPPORT - rtsol
MK_NETCAT - nc
MFC after: 3 days
Sponsored by: Dell EMC Isilon
shutdown is a safer way to power off than reboot (in general), because of
the added shutdown process that it executes via /etc/rc.shutdown . It was
odd that it was missing from rescue(8) since reboot and friends were
added in past commits.
While here, alias poweroff to shutdown for parity with sbin/shutdown/Makefile
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
- Add a kvaddr_type to represent kernel virtual addresses instead of
unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles(). It drops the
unused 'swapfile' argument and adds a new function pointer argument for
a symbol resolving function. Native kernels still use _fdnlist() from
libc to resolve symbols if a resolver function is not supplied, but cross
kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
Each backend is responsible for implementing kvm_read2() for a given
vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
powerpc cores).
- Add internal helper routines for the common page offset hash table used
by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
to be cross-friendly by using private constants instead of ones that
vary by platform (e.g. PAGE_SIZE). Static assertions are present when
a given backend is compiled natively to ensure the private constants
match the real ones.
- Enable all of the existing vmcore backends on all platforms. This means
that libkvm on any platform should be able to perform KVA translation
and read data from a vmcore of any platform.
Tested on: amd64, i386, sparc64 (marius)
Differential Revision: https://reviews.freebsd.org/D3341
easier to build md_root images from rescue(8), to use with iSCSI boot.
The change increases the size of rescue by 62kB, from 8728kB to 8790kB.
Reviewed by: bapt@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3865
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
This brings support for multi-threaded compression. This brings close
N times faster compression where N is the number of CPU cores.
Because of this, liblzma now depends on libthr.
Soon libarchive will be modified to use the new lzma API.
Thanks to antoine@ for the exp-run.
Differential Revision: https://reviews.freebsd.org/D1786
Reviewed by: bapt
