sys/kern/kern_conf.c:
Add make_dev_physpath_alias(). This interface takes
the parent cdev of the alias, an old alias cdev (if any)
to replace with the newly created alias, and the physical
path string. The alias is visiable as a symlink to the
parent, with the same name as the parent, rooted at
physpath in devfs.
Note: make_dev_physpath_alias() has hard coded knowledge of the
Solaris style prefix convention for physical path data,
"id1,". In the future, I expect the convention to change
to allow "physical path quality" to be reported in the
prefix. For example, a physical path based on NewBus
topology would be of "lower quality" than a physical path
reported by a device enclosure.
Sponsored by: Spectra Logic Corporation
and destroy_devl() drops dev_mtx. The protection against the race
with dev_rel(), introduced in r163328, should be extended to cover
destroy_devl() calls for the children of the destroyed dev.
Reported and tested by: joerg
MFC after: 1 week
A new function prep_devname() sanitizes a device name by removing
leading and redundant sequential slashes. The function returns an error
for names which already exist or are considered invalid.
A new flag MAKEDEV_CHECKNAME for make_dev_p(9) and make_dev_credf(9)
indicates that the caller is prepared to handle an error related to the
device name. An invalid name triggers a panic if the flag is not
specified.
Document the MAKEDEV_CHECKNAME flag in the make_dev(9) manual page.
Idea from: kib
Reviewed by: kib
cdev will never be destroyed. Propagate the flag to devfs vnodes as
VV_ETERNVALDEV. Use the flags to avoid acquiring devmtx and taking a
thread reference on such nodes.
In collaboration with: pho
MFC after: 1 month
New code that creates character devices shouldn't use device unit
numbers, but only si_drv[12] to hold pointer to per-device data. Make
this function more future proof by removing the unit number argument.
Discussed with: kib
in a no-sleep context. If resource allocation cannot be done without
sleep, make_dev_credf() fails and returns NULL.
Reviewed by: jh
MFC after: 2 weeks
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.
Purge d_mmap2().
All driver modules will need to be rebuilt since D_VERSION is also
bumped.
Reviewed by: jhb@
MFC after: Not in this lifetime...
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
pages in an object.
- Add a new variant of d_mmap() currently called d_mmap2() which accepts
an additional in/out parameter that is the memory attribute to use for
the requested page.
- A driver either uses d_mmap() or d_mmap2() for all requests but not both.
The current implementation uses a flag in the cdevsw (D_MMAP2) to indicate
that the driver provides a d_mmap2() handler instead of d_mmap(). This
is done to make the change ABI compatible with existing drivers and
MFC'able to 7 and 8.
Submitted by: alc
MFC after: 1 month
device drivers to use arbitrary VM objects to satisfy individual mmap()
requests.
- A new d_mmap_single(cdev, &foff, objsize, &object, prot) callback is
added to cdevsw. This function is called for each mmap() request.
If it returns ENODEV, then the mmap() request will fall back to using
the device's device pager object and d_mmap(). Otherwise, the method
can return a VM object to satisfy this entire mmap() request via
*object. It can also modify the starting offset into this object via
*foff. This allows device drivers to use the file offset as a cookie
to identify specific VM objects.
- vm_mmap_vnode() has been changed to call vm_mmap_cdev() directly when
mapping V_CHR vnodes. This avoids duplicating all the cdev mmap
handling code and simplifies some of vm_mmap_vnode().
- D_VERSION has been bumped to D_VERSION_02. Older device drivers
using D_VERSION_01 are still supported.
MFC after: 1 month
the behaviour alredy present with the further malloc() call in
devctl_notify().
This fixes a bug in the CAM layer where the camisr handler finished to
call camperiphfree() (and subsequently destroy_dev() resulting in a new
dev notify) while the xpt lock is held.
PR: kern/130330
Tested by: Riccardo Torrini <riccardo dot torrini at esaote dot com>
In the good old days it was possible to have dev_t's that referred to
nonexistent devices. In these cases devtoname() automatically generated
names. This is no longer possible, so remove this dead code.
Discussed with: kib
Remove the `udev' variable, which has a different type than the original
function argument and si_drv0. The `udev' name is also misleading,
because it is not the number returned by dev2udev(). Rename this
argument to `unit'. It is the same number as returned by dev2unit().
We should still access si_drv0 using dev2unit(). Also change the
KASSERT() to really print the udev instead of the unit number. I suspect
it's still useful to print the unit number, especially for devices that
use clone lists, so keep the unit number in the panic string.
poll_no_poll().
Return a poll_no_poll() result from devfs_poll_f() when
filedescriptor does not reference the live cdev, instead of ENXIO.
Noted and tested by: hps
MFC after: 1 week
The uminor() and umajor() functions have the same use in kernel space as
the minor() and major() functions in userspace. If we ever get rid of
the minor() function in kernel space, we could decide to just expose
minor() and major() to kernel space, making uminor() and umajor()
redundant.
There are two reasons why we want to have uminor() and umajor() in
<sys/types.h>:
- Having them close together prevents them from diverting. Even though
it's unlikely the definitions will change, it's a good habit to have
them at the same place.
- They don't really belong in kern_conf.c. kern_conf.c has been
liberated from dealing with device major and minor number handling.
The device_ids(9) manpage now lists the wrong #include's, because it
should only list <sys/types.h> now. I'm leaving it as it is now, because
I wonder if we should document them anyway. We're probably better off
documenting minor(3) and major(3).
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.
This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.
Reviewed by: kib
To prevent any further confusion about device minor and unit numbers,
we'd better just refer to device unit numbers. Many people still think
the numbers we show inside devfs have any relation to the numbers passed
to make_dev(9), which is not the case.
Discussed with: kib
When I changed kern_conf.c three months ago I made device unit numbers
equal to (unneeded) device minor numbers. We used to require
bitshifting, because there were eight bits in the middle that were
reserved for a device major number. Not very long after I turned
dev2unit(), minor(), unit2minor() and minor2unit() into macro's.
The unit2minor() and minor2unit() macro's were no-ops.
We'd better not remove these four macro's from the kernel, because there
is a lot of (external) code that may still depend on them. For now it's
harmless to remove all invocations of unit2minor() and minor2unit().
Reviewed by: kib
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
SI_ALIAS flag and initialization of the si_parent when alias is created.
Assert that supplied parent device is not NULL.
Both situations could cause NULL dereference in the
devfs_populate_loop() when creating a symlink for SI_ALIAS'ed device.
Namely, cdp->cdp_c.si_parent may be NULL.
Reported by: mav
MFC after: 2 weeks
needed to promote cdev to cdev_priv, the si_priv pointer was followed.
Use member2struct() to calculate address of the wrapping cdev_priv.
Rename si_priv to __si_reserved.
Tested by: pho
Reviewed by: ed
MFC after: 2 weeks
Now that we got rid of the minor-to-unit conversion and the constraints
on device minor numbers, we can convert the functions that operate on
minor and unit numbers to simple macro's. The unit2minor() and
minor2unit() macro's are now no-ops.
The ZFS code als defined a macro named `minor'. Change the ZFS code to
use umajor() and uminor() here, as it is the correct approach to do
this. Also add $FreeBSD$ to keep SVN happy.
Approved by: philip (mentor), pjd
Except for the case where we use the cloner library (clone_create() and
friends), there is no reason to enforce a unique device minor number
policy. There are various drivers in the source tree that allocate unr
pools and such to provide minor numbers, without using them themselves.
Because we still need to support unique device minor numbers for the
cloner library, introduce a new flag called D_NEEDMINOR. All cdevsw's
that are used in combination with the cloner library should be marked
with this flag to make the cloning work.
This means drivers can now freely use si_drv0 to store their own flags
and state, making it effectively the same as si_drv1 and si_drv2. We
still keep the minor() and dev2unit() routines around to make drivers
happy.
The NTFS code also used the minor number in its hash table. We should
not do this anymore. If the si_drv0 field would be changed, it would no
longer end up in the same list.
Approved by: philip (mentor)
Even though we got rid of device major numbers some time ago, device
drivers still need to provide unique device minor numbers to make_dev().
These numbers are only used inside the kernel. They are not related to
device major and minor numbers which are visible in devfs. These are
actually based on the inode number of the device.
It would eventually be nice to remove minor numbers entirely, but we
don't want to be too agressive here.
Because the 8-15 bits of the device number field (si_drv0) are still
reserved for the major number, there is no 1:1 mapping of the device
minor and unit numbers. Because this is now unused, remove the
restrictions on these numbers.
The MAXMAJOR definition was actually used for two purposes. It was used
to convert both the userspace and kernelspace device numbers to their
major/minor pair, which is why it is now named UMINORMASK.
minor2unit() and unit2minor() have now become useless. Both minor() and
dev2unit() now serve the same purpose. We should eventually remove some
of them, at least turning them into macro's. If devfs would become
completely minor number unaware, we could consider using si_drv0 directly,
just like si_drv1 and si_drv2.
Approved by: philip (mentor)
The patch does not change the cdevsw KBI. Management of the data is
provided by the functions
int devfs_set_cdevpriv(void *priv, cdevpriv_dtr_t dtr);
int devfs_get_cdevpriv(void **datap);
void devfs_clear_cdevpriv(void);
All of the functions are supposed to be called from the cdevsw method
contexts.
- devfs_set_cdevpriv assigns the priv as private data for the file
descriptor which is used to initiate currently performed driver
operation. dtr is the function that will be called when either the
last refernce to the file goes away, the device is destroyed or
devfs_clear_cdevpriv is called.
- devfs_get_cdevpriv is the obvious accessor.
- devfs_clear_cdevpriv allows to clear the private data for the still
open file.
Implementation keeps the driver-supplied pointers in the struct
cdev_privdata, that is referenced both from the struct file and struct
cdev, and cannot outlive any of the referee.
Man pages will be provided after the KPI stabilizes.
Reviewed by: jhb
Useful suggestions from: jeff, antoine
Debugging help and tested by: pho
MFC after: 1 month
drivers.
In the giant_XXX wrappers for the device methods of the D_NEEDGIANT
drivers, do not dereference the cdev->si_devsw. It is racing with
the destroy_devl() clearing of the si_devsw. Instead, use the
dev_refthread() and return ENXIO for the destroyed device. [1]
The check for the D_INIT in the prep_cdevsw() was not synchronized with
the call of the fini_cdevsw() in destroy_devl(), that under rapid device
creation/destruction may result in the use of uninitialized cdevsw [2].
Change the protocol for the prep_cdevsw(), requiring it to be called
under dev_mtx, where the check for D_INIT is done.
Do not free the memory allocated for the gianttrick cdevsw while holding
the dev_mtx, put it into the free list to be freed later. Reuse the
d_gianttrick pointer to keep the size and layout of the struct cdevsw
(requested by phk). Free the memory in the dev_unlock_and_free(), and do
all the free after the dev_mtx is dropped (suggested by jhb).
Reported by: bsdimp + many [1], pho [2]
Reviewed by: phk, jhb
Tested by: pho
MFC after: 1 week
within the jail are never freed. si_cred is only used by the MAC framework so
make the cred reference conditional on it being compiled in, this is not a fix
and will need to be reviewed for any new consumers of si_cred.
This will quell some user complaint when using jails with a default kernel.
Reviewed by: rwatson
MFC after: 3 days
shall not be called while holding cdev mutex. devfs_inos unrhdr has cdev as
mutex, thus creating this LOR situation.
Postpone calling free() in kern/subr_unit.c:alloc_unr() and nested functions
until the unrhdr mutex is dropped. Save the freed items on the ppfree list
instead, and provide the clean_unrhdrl() and clean_unrhdr() functions to
clean the list.
Call clean_unrhdrl() after devfs_create() calls immediately before
dropping cdev mutex. devfs_create() is the only user of the alloc_unrl()
in the tree.
Reviewed by: phk
Tested by: Peter Holm
LOR: 80
Approved by: re (kensmith)
destroy_dev() is called from csw method, and no d_purge driver method is
provided. Transform the direct call to destroy_dev() into destroy_dev_sched().
Reviewed by: njl (programming interface)
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
destroy_dev() from d_close() cdev method would self-deadlock.
devfs_close() bump device thread reference counter, and destroy_dev()
sleeps, waiting for si_threadcount to reach zero for cdev without
d_purge method.
destroy_dev_sched() could be used instead from d_close(), to
schedule execution of destroy_dev() in another context. The
destroy_dev_sched_drain() function can be used to drain the scheduled
calls to destroy_dev_sched(). Similarly, drain_dev_clone_events() drains
the events clone to make sure no lingering devices are left after
dev_clone event handler deregistered.
make_dev_credf(MAKEDEV_REF) function should be used from dev_clone
event handlers instead of make_dev()/make_dev_cred() to ensure that created
device has reference counter bumped before cdev mutex is dropped inside
make_dev().
Reviewed by: tegge (early versions), njl (programming interface)
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
Postpone call to devfs_free() after cdev mutex is dropped. Reuse
cdp_list link for queuing devices awaiting deletion in the
cdevp_free_list.
Reported by: Hans Petter Selasky <hselasky c2i net>
Tested by: Peter Holm
Approved by: re (kensmith)
MFC after: 2 weeks
