Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
all interested parties in case if interface flag IFF_UP has changed.
However, not only SIOCSIFFLAGS can raise the flag, but SIOCAIFADDR
and SIOCAIFADDR_IN6 can, too. The actual |= is done not in the protocol
code, but in code of interface drivers. To fix this historical layering
violation, we will check whether ifp->if_ioctl(SIOCSIFADDR) raised the
IFF_UP flag, and if it did, run the if_up() handler.
This fixes configuring an address under CARP control on an interface
that was initially !IFF_UP.
P.S. I intentionally omitted handling the IFF_SMART flag. This flag was
never ever used in any driver since it was introduced, and since it
means another layering violation, it should be garbage collected instead
of pretended to be supported.
that we still have a problem with this whole structure of
locks and in_input.c [it does not lock which it should not, but
this *can* lead to crashes]. (I have seen it in our SQA
testbed.. besides the one with a refcnt issue that I will
have SQA work on next week ;-)
assure that *all* tables and such are removed before
we start to free. This won't protect the Hash in ip_input.c
but in theory should protect any other uses that *do* use locks.
MFC after: 1 week (or more)
llentry_free() and arptimer():
o Use callout_init_rw() for lle timeout, this allows us safely
disestablish them.
- This allows us to simplify the arptimer() and make it
race safe.
o Consistently use ifp->if_afdata_lock to lock access to
linked lists in the lle hashes.
o Introduce new lle flag LLE_LINKED, which marks an entry that
is attached to the hash.
- Use LLE_LINKED to avoid double unlinking via consequent
calls to llentry_free().
- Mark lle with LLE_DELETED via |= operation istead of =,
so that other flags won't be lost.
o Make LLE_ADDREF(), LLE_REMREF() and LLE_FREE_LOCKED() more
consistent and provide more informative KASSERTs.
The patch is a collaborative work of all submitters and myself.
PR: kern/165863
Submitted by: Andrey Zonov <andrey zonov.org>
Submitted by: Ryan Stone <rysto32 gmail.com>
Submitted by: Eric van Gyzen <eric_van_gyzen dell.com>
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
These are available as t3_tom and t4_tom modules that augment cxgb(4)
and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as
usual with or without these extra features.
- iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the
works and will follow soon.
Build-tested with make universe.
30s overview
============
What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE
Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe
Which connections are offloaded? Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe
Reviewed by: bz, gnn
Sponsored by: Chelsio communications.
MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
at which the lle_tbl pointer points to freed memory and the llt_free pointer is no longer
valid.
Move the free pointer in to the llentry itself and update the initalization sites.
MFC after: 2 weeks
the original IPv4 implementation from r178888:
- Use RT_DEFAULT_FIB in the IPv4 implementation where noticed.
- Use rt*fib() KPI with explicit RT_DEFAULT_FIB where applicable in
the NFS code.
- Use the new in6_rt* KPI in TCP, gif(4), and the IPv6 network stack
where applicable.
- Split in6_rtqtimo() and in6_mtutimo() as done in IPv4 and equally
prevent multiple initializations of callouts in in6_inithead().
- Use wrapper functions where needed to preserve the current KPI to
ease MFCs. Use BURN_BRIDGES to indicate expected future cleanup.
- Fix (related) comments (both technical or style).
- Convert to rtinit() where applicable and only use custom loops where
currently not possible otherwise.
- Multicast group, most neighbor discovery address actions and faith(4)
are locked to the default FIB. Individual IPv6 addresses will only
appear in the default FIB, however redirect information and prefixes
of connected subnets are automatically propagated to all FIBs by
default (mimicking IPv4 behavior as closely as possible).
Sponsored by: Cisco Systems, Inc.
missing interface address list locking and grab a reference on the
matching interface address after dropping the lock while it is used to
avoid a potential use after free.
Reviewed by: bz
MFC after: 1 week
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.
The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.
ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.
To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]
The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.
Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!
PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by: bz
Submitted by: bz [1]
structs ifreq/in_aliasreq and there've been several panics due
to that problem. All these panics were fixed just a couple of
lines above the panicing code.
Take a more general approach: sanity check sockaddrs supplied
with SIOCAIFADDR and SIOCSIF*ADDR at the beggining of the
function and drop all checks below.
One check is now disabled due to strange code in ifconfig(8)
that I've removed recently. I'm going to enable it with next
__FreeBSD_version bump.
Historically in_ifinit() was able to recover from an error
and restore old address. Nowadays this feature isn't working
for all error cases, but for some of them. I suppose no software
relies on this behavior, so I'd like to remove it, since this
simplifies code a lot.
Also, move if_scrub() earlier in the in_ifinit(). It is more
correct to wipe routes before removing address from local
address list, and interface address list.
Silence from: bz, brooks, andre, rwatson, 3 weeks
interfaces. A host route has a NULL mask so check for that condition.
I have also been told by developers who customize the packet output
path with direct manipulation of the route entry (or the outgoing
interface to be specific). This patch checks for the route mask
explicitly to make sure custom code will not panic.
PR: kern/161805
MFC after: 3 days
To run a /31 network, participating hosts MUST drop support
for directed broadcasts, and treat the first and last addresses
on subnet as unicast. The broadcast address for the prefix
should be the link local broadcast address, INADDR_BROADCAST.
- Remove ia_net, ia_netmask, ia_netbroadcast from struct in_ifaddr.
- Remove net.inet.ip.subnetsarelocal, I bet no one need it in 2011.
- fix bug when we were not forwarding to a host which matches classful
net address. For example router having 192.168.x.y/16 network attached,
would not forward traffic to 192.168.*.0, which are legal IPs in
CIDR world.
- For compatibility, leave autoguessing of mask based on class.
Reviewed by: andre, bz, rwatson
route where the destination IP and the gateway IP is the same. This
special case handling is only meant for backward compatibility reason.
The last commit introduced a bug in the route check logic, where a
valid special case is treated as an error. This patch fixes that bug
along with some code cleanup.
Suggested by: gleb
Reviewed by: kmacy, discussed with gleb
MFC after: 1 day
address if that interface does not support ARP. Otherwise the
system will generate error messages unnecessarily due to the missing
entry.
PR: kern/159602
Submitted by: pluknet
MFC after: 3 days
address is being deleted. Only the last reference holder deletes the
loopback route. All other delete operations just clear the IFA_RTSELF
flag.
PR: kern/159601
Submitted by: pluknet
Reviewed by: discussed on net@
MFC after: 3 days
same prefix. Since a single route entry is installed for the prefix
(without RADIX_MPATH), incoming packets on the interfaces that are not
associated with the prefix route may trigger an error message about
unable to allocation LLE entry, and fails L2. This patch makes sure a
valid route is present in the system, and allow the aforementioned
condition to exist and treats as valid.
Reviewed by: bz
MFC after: 5 days
route with the same prefix is searched for as a replacement. The
current code did not bypass routes that have non-operational
interfaces. This patch fixes that bug and will find a replacement
route with an active interface.
PR: kern/159603
Submitted by: pluknet, ambrisko at ambrisko dot com
Reviewed by: discussed on net@
Approved by: re (bz)
MFC after: 3 days
same as the host address. This already works fine for INET6 and ND6.
While here, remove two function pointers from struct lltable which are
only initialized but never used.
MFC after: 3 days
address so that proper clean up will take place in the routing code.
This patch fixes the bootp panic on startup problem. Also, added more
error handling and logging code in function in_scrubprefix().
MFC after: 5 days
interface is brought down, even though the interface address is still
valid. This patch maintains the permanent ARP entries as long as the
interface address (having the same prefix as that of the ARP entries)
is valid.
Reviewed by: delphij
MFC after: 5 days
from another context at the moment of later access.
PR: kern/155555
Submitted by: Andrew Boyer <aboyer att averesystems.com>
Approved by: avg (mentor)
MFC after: 2 weeks
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
