Commit Graph

162473 Commits

Author SHA1 Message Date
Sergey Kandaurov
443db69597 Remove malloc type M_NETADDR unused since splitting into vfs_subr.c
and vfs_export.c.

MFC after:	1 week
2011-04-04 16:23:01 +00:00
Adrian Chadd
9e9ae8e207 Commit missing bits from the last commit:
* add the hal capability flag
* make sure its disabled for the ar9280/ar9285.
2011-04-04 14:53:36 +00:00
Adrian Chadd
8a2a6beedb Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.
From the ath9k source:

==

11N: we can no longer afford to self link the last descriptor.
MAC acknowledges BA status as long as it copies frames to host
buffer (or rx fifo). This can incorrectly acknowledge packets
to a sender if last desc is self-linked.

==

Since this is useful for pre-AR5416 chips that communicate PHY errors
via error frames rather than by on-chip counters, leave the support
in there, but disable it for AR5416 and later.
2011-04-04 14:52:31 +00:00
Adrian Chadd
efa7c2b36c At least set the coverage class value here; worry about populating the
register values at a later date.
2011-04-04 11:01:53 +00:00
Sergey Kandaurov
1046090f1f Do not increment num_args if strsep(3) returned an empty field.
That fixes devstat_buildmatch(3) crashes with certain strings.

Reported by:	arundel
MFC after:	2 weeks
2011-04-04 09:25:27 +00:00
Gleb Smirnoff
4c506522c1 When removing ifnets, we should first remove the reference to ifnet
from the interface index, then decrease refcount, not vice versa.

Otherwise there is a race (reproducible) when if_free_internal()
contests on IFNET_WLOCK(), and we got a zero-refed ifnet in the
index for a long time. It may be picked by some other thread,
that runs ifnet_byindex_ref(), who takes the ifnet from index,
and bumps refcount. When reader drops the lock, if_free_internal()
proceeds with free. Then reader tries to free it a second time.
2011-04-04 07:45:08 +00:00
Andrew Thompson
ea956f2614 Lower WARNS to unbreak the build, some archs may have alignment issues. 2011-04-04 03:43:13 +00:00
Andrew Thompson
0d736113d2 fix printing of tv_usec 2011-04-04 02:57:19 +00:00
Marcel Moolenaar
76ceb3c6ee Use the new arch_loadaddr I/F to align ELF objects to PBVM page
boundaries. For good measure, align all other objects to cache
lines boundaries.

Use the new arch_loadseg I/F to keep track of kernel text and
data so that we can wire as much of it as is possible. It is
the responsibility of the kernel to link critical (read IVT
related) code and data at the front of the respective segment
so that it's covered by TRs before the kernel has a chance to
add more translations.

Use a better way of determining whether we're loading a legacy
kernel or not. We can't check for the presence of the PBVM page
table, because we may have unloaded that kernel and loaded an
older (legacy) kernel after that. Simply use the latest load
address for it.
2011-04-03 23:49:20 +00:00
Hans Petter Selasky
9e7abe05cf - Include usbdump into default build.
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 22:36:40 +00:00
Marcel Moolenaar
0cca5d3d90 Add 2 new archsw interfaces:
1.  arch_loadaddr - used by platform code to adjust the address at which
    the object gets loaded. Implement PC98 using this new interface instead
    of using conditional compilation. For ELF objects the ELF header is
    passed as the data pointer. For raw files it's the filename. Note that
    ELF objects are first considered as raw files.
2.  arch_loadseg - used by platform code to keep track of actual segments,
    so that (instruction) caches can be flushed or translations can be
    created. Both the ELF header as well as the program header are passed
    to allow platform code to treat the kernel proper differently from any
    additional modules and to have all the relevant details of the loaded
    segment (e.g. protection).
2011-04-03 22:31:51 +00:00
Hans Petter Selasky
6c352e994c - Fix for missing event if a libUSB USB transfer is started and
stopped rapidly in succession.

Reported by:	J.R. Oldroyd
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 20:22:49 +00:00
Hans Petter Selasky
3ea3537594 - Correct EHCI interrupt disabling at detach.
Submitted by:	Luiz Otavio O Souza
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 20:17:49 +00:00
Adrian Chadd
f90a170c46 I missed committing this last time - it's needed for the 5ghz fast clock calculation. 2011-04-03 20:15:41 +00:00
Hans Petter Selasky
31a1169186 - Improvements to USB PF solution
- Add more fields for USB device and host mode
- Add more information to USB PF header so that decoding
  can easily be done by software analyzer tools like
  Wireshark.
- Optimise usbdump to display USB streams in text format
  more efficiently.
- Software using USB PF must be recompiled after
  this commit, due to structure changes.

MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 20:03:45 +00:00
Mikolaj Golub
90574b0a79 In g_eli_read_done() and g_eli_write_done(), for a bio with
bio_children > 1, g_destroy_bio() is never called and the bio
leaks. Fix this by calling g_destroy_bio() earlier, before the check.

Submitted by:	Victor Balada Diaz <victor@bsdes.net> (initial version)
Approved by:	pjd (mentor)
MFC after:	1 week
2011-04-03 17:38:12 +00:00
Adrian Chadd
97efbf40fc Add in the clock timing calculation when Merlin is using the 5ghz fast clock.
This is a 44mhz clock, not a 40mhz clock like normal for 5ghz operation.
2011-04-03 17:36:32 +00:00
Adrian Chadd
f7a5c9d346 Import the initial CPU support for the MIPS RALink RT305x SoC.
This is a MIPS4KC CPU with various embedded peripherals, including
wireless and ethernet support.

This commit includes the platform, UART, ethernet MAC and GPIO support.
The interrupt-driven GPIO code is disabled for now pending GPIO changes
from the submitter.

Submitted by:	Aleksandr Rybalko <ray@dlink.ua>
2011-04-03 14:39:55 +00:00
Adrian Chadd
77ae677e4a Add in some missing flags in the EHCI initialisation code,
needed to get USB working on the AR913x/AR724x.
2011-04-03 14:34:28 +00:00
Adrian Chadd
dcd35c3150 Commit configuration files for the AR913x SoC and the TP-Link WR-1043ND.
The AR91XX_BASE{,.hints} files define all the common parameters for
the AR913x SoC systems.

The TP-1043ND config file adds local parameters.
2011-04-03 13:19:58 +00:00
Adrian Chadd
c55968698f Import a fix from the ath9k - reduce the TX FIFO size for Kite (AR9285.) 2011-04-03 12:02:49 +00:00
Adrian Chadd
3d45fa543f Add an explanation of the inivals 2011-04-03 11:59:52 +00:00
Adrian Chadd
bb4a39501a Import nvram2env, a device driver which imports various NVRAM-style
environments into the kernel environment.

The eventual aim is to replace these with specific drivers for
the various bootloaders (redboot, uboot, etc.) This however will
work for the time being until it can be properly addressed.

Submitted by: Aleksandr Rybalko <ray@dlink.ua>
2011-04-03 11:55:48 +00:00
Marcel Moolenaar
429d5c051f Revert rev 165325. The arch_maphint interface hasn't been in use for
more than 4 years.
2011-04-03 05:09:25 +00:00
Edwin Groothuis
d58b52ac0c MFV of tzdata2011e:
Change for Africa/Casablanca:
- The 3rd april 2011 at 00:00:00, [it] will be 3rd april 1:00:00
- The 31th july 2011 at 00:59:59,  [it] will be 31th July 00:00:00

Update for SouthAmerica/Chili:
- Chile's clocks will go back an hour this year on the 7th of May instead
  of this Saturday. They will go forward again the 3rd Saturday in
  August, not in October as they have since 1968. This is a pilot plan
  which will be reevaluated in 2012.
2011-04-03 03:42:42 +00:00
Edwin Groothuis
9c4fb26cc5 Vendor import of tzdata2011e:
Change for Africa/Casablanca:
- The 3rd april 2011 at 00:00:00, [it] will be 3rd april 1:00:00
- The 31th july 2011 at 00:59:59,  [it] will be 31th July 00:00:00

Update for SouthAmerica/Chili:
- Chile's clocks will go back an hour this year on the 7th of May instead
  of this Saturday. They will go forward again the 3rd Saturday in
  August, not in October as they have since 1968. This is a pilot plan
  which will be reevaluated in 2012.

Obtained from:   ftp://elsie.nci.nih.gov/pub/
2011-04-03 03:39:59 +00:00
Marcel Moolenaar
66ddefc574 Make the ski loader functional again after the previous set of changes. 2011-04-03 03:26:12 +00:00
Jeff Roberson
f79d4144ab Fix problems that manifested from filesystem full conditions:
- In softdep_revert_mkdir() find the dotaddref before we attempt to cancel
   the jaddref so we can make assumptions about where the dotaddref is on
   the list.  cancel_jaddref() does not always remove items from the list
   anymore.
 - Always set GOINGAWAY on an inode in softdep_freefile() if DEPCOMPLETE
   was never set.  This ensures that dependencies will continue to be
   processed on the inowait/bufwait list and is more an artifact of
   the structure of the code than a pure ordering problem.
 - Always set DEPCOMPLETE on canceled jaddrefs so that they can be freed
   appropriately.  This normally occurs when the refs are added to the
   journal but if they are canceled before this point the state would
   never be set and the dependency could never be freed.

Reported by:	pho
Tested by:	pho
2011-04-02 21:52:58 +00:00
Konstantin Belousov
78272eedf0 Implement compat32 shims for PCIOCGETCONF.
There is a generic problem with the shims for ioctls that receive
pointers to the usermode data areas in the data argument. We either have
to modify the handler to accept UIO_USERSPACE/UIO_SYSSPACE indicator, or
allocate and fill a usermode memory for data buffer in the host format.
The change goes the second route, in particular because we do not need
to modify the handler.

Submitted by:	John Wehle <john feith com>
MFC after:	2 weeks
2011-04-02 16:02:25 +00:00
Konstantin Belousov
4ee107ddc9 Provide the structures and ioctl number definition for handling
PCIOCGETCONF compat32.

Submitted by:	John Wehle <john feith com>
MFC after:	2 weeks
2011-04-02 15:47:23 +00:00
Edward Tomasz Napierala
6fd8c2bd8a Add accounting for RACCT_NPTS. 2011-04-02 15:02:42 +00:00
Adrian Chadd
148fa1ce9e Add missing include.
Reported by: Ulrich Sporlein <uqs@spoerlein.net>
2011-04-02 09:46:09 +00:00
Pawel Jakub Dawidek
39526f7fb6 Increase default timeout from 5 seconds to 20 seconds. 5 seconds is definitely
to short under heavy load and I was experiencing those timeouts in my recent
tests.

MFC after:	1 week
2011-04-02 09:34:33 +00:00
Pawel Jakub Dawidek
41bb85146b Handle ENOBUFS on send(2) by retrying for a while and logging the problem.
MFC after:	1 week
2011-04-02 09:31:02 +00:00
Pawel Jakub Dawidek
a7ebb3eb8b When we are operating on blocking socket and get EAGAIN on send(2) or recv(2)
this means that request timed out. Translate the meaningless EAGAIN to
ETIMEDOUT to give administrator a hint that he might need to increase timeout
in configuration file.

MFC after:	1 month
2011-04-02 09:29:53 +00:00
Pawel Jakub Dawidek
02dfe9724c Declare directions for sockets between primary and secondary.
In HAST we use two sockets - one for only sending the data and one for only
receiving the data.

MFC after:	1 month
2011-04-02 09:25:13 +00:00
Pawel Jakub Dawidek
3a0b818f59 Allow to disable sends or receives on a socket using shutdown(2) by
interpreting NULL 'data' argument passed to proto_common_send() or
proto_common_recv() as a will to do so.

MFC after:	1 month
2011-04-02 09:22:06 +00:00
Pawel Jakub Dawidek
2a49afacd1 Handle the problem described in r220264 by using GEOM GATE queue of unlimited
length. This should fix deadlocks reported by HAST users.

MFC after:	1 week
2011-04-02 07:01:09 +00:00
Pawel Jakub Dawidek
ab9092093c Because ggatel(8) operates on local GEOM providers, use unlimited queue size in
GEOM GATE to fix the issue described in r220264. This also means that we no
longer need -q option, remove it. Don't bother to leaving it as a no-op, as
ggatel(8) is just an example utility.
2011-04-02 06:59:05 +00:00
Pawel Jakub Dawidek
63a6c5c12b GEOM has an internal mechanism to deal with ENOMEM errors returned via
g_io_deliver(). In such case it increases 'pace' counter on each ENOMEM and
reschedules the request. The 'pace' counter is decreased for each request going
down, but until 'pace' is greater than zero, GEOM will handle at most 10
requests per second. For GEOM GATE users that are proxy to local GEOM providers
(like ggatel(8) and HAST) we can end up with almost permanent slow down of GEOM
down queue. This is because once we reach GEOM GATE queue limit, we return
ENOMEM to the GEOM. This means that we have, eg. 1024 I/O requests in the GEOM
GATE queue. To make room in the queue and stop returning ENOMEM we need to
proceed the requests of course, but those requests are handled by userland
daemons that handle them by reading/writing also from/to local GEOM providers.
For example with HAST, a new requests comes to /dev/hast/data, which is GEOM
GATE provider. GEOM GATE passes the request to hastd(8) and hastd(8)
reads/writes from/to /dev/da0. Once we reach GEOM GATE queue limit, to free up
a slot in GEOM GATE queue, hastd(8) has to read/write from/to /dev/da0, but
this request will also be very slow, because GEOM now slows down all the
requests. We end up with full queue that we can unload at the speed of 10
requests per second. This simply looks like a deadlock.

Fix it by allowing userland daemons that work with both GEOM GATE and local
GEOM providers to specify unlimited queue size, so GEOM GATE will never return
ENOMEM to the GEOM.

MFC after:	1 week
2011-04-02 06:56:06 +00:00
Gordon Tetlow
deeff310cc Overhaul locale handling.
Use locale(1) to determine the locale instead of trying to hand roll it.
Correctly construct groff call based on charset and locale independently,
not the mix between the two.

Submitted by:	uqs@
2011-04-02 05:01:09 +00:00
Adrian Chadd
0b11462b7d A handful of the openwrt devices use a MAC address that's at a hard-coded
offset in the flash.

Some devices (eg the TPLink WR-1043ND) don't have a flash environment
partition which can be queried for the current board settings.

This particular workaround allows for image creators to use a hint
to set the base MAC address. For example:

hint.arge.0.eeprommac=0x1f01fc00
2011-04-02 03:48:15 +00:00
Adrian Chadd
634a6d0283 From ath9k - clear the RX descriptor status before recycling it. 2011-04-02 00:27:22 +00:00
Adrian Chadd
5d51c507d0 Add some more debugging 2011-04-02 00:24:13 +00:00
Artem Belevich
aecaead25b Added myself as src committer.
Approved by: avg (mentor)
2011-04-02 00:08:32 +00:00
Ed Maste
bedca8b119 Uuencode the sample "binary" firmware image file (instead of explicitly
adding \0 bytes).  This is a technique that would be used in an actual
driver and is more suitable as an example.

Reviewed by:    mlaier
2011-04-01 23:47:10 +00:00
Ulrich Spörlein
86be754604 Fix the delete-old/check-old targets to work with arbitrarily long
OLD_FILES/OLD_DIRS/OLD_LIBS lists.

If you specify enough WITHOUT_FOO flags, the argument list passed to the
shell will be too long. Using .for/.endfor make(1) "loop" will make the
parser of the Makefile explode. Hack around this with good old pipes.

No objections:	netchild
Reported by:	b.f.
2011-04-01 20:59:23 +00:00
Jack F Vogel
62d8da8c3a Fix to an error condition case, when an mbuf chain
get's defragged due to a mapping failure the header
pointers will be invalidated and can result in a
TSO or other failure down the line. So, when the
remapping occurs force a retry thru the offload
calculation code. Thanks to Andrew Boyer for discovering
this and cooking up the fix!!
2011-04-01 20:24:51 +00:00
Konstantin Belousov
05f2ecd1fa Fix mdoc errors.
Submitted by:	ru
MFC after:	3 days
2011-04-01 19:57:27 +00:00
Pyun YongHyeon
595615e6a4 Partially revert r184106. RX buffer ring also needs bus_dmamap_sync().
Tested by:	Yamagi Burmeister (lists <> yamagi dot org)
MFC after:	1 week
2011-04-01 18:53:41 +00:00