This work, originally from Stacey Son, uses the MIPS UserReg for
reading the TLS data, and will fall back to the normal syscall path
when it isn't supported.
This code dynamically patches cpu_switch() to bypass the UserReg
instruction so to avoid generating a machine exception.
Thanks to sson for the original work, and to Dan Nelson for
bringing it to date and testing it on MIPS32 with me.
Tested:
* mips64 (sson)
* mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support
* mips24k (adrian) - AR9331 SoC, no UserReg support
Obtained from: sson, dnelson_1901@yahoo.com
The root of the problem here is that TAILQ_FOREACH_FROM will default to
the head of the list if passed NULL, which will be the case if there are
no libraries loaded after this one. Thus all libraries, including the
current, were iterated in that case rather than none.
This was broken in r294373.
Reviewed by: markj (earlier version), cem, kib, ngie
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7216
The dependency is needed in PROG_FULL since only the build of PROG_FULL
is using the LDFLAGS and depending on VERSION_MAP. This was not a problem
with MK_DEBUG_FILES==no since it only builds PROG.
This should probably be using bsd.lib.mk instead [1]
Reported by: swills, gjb
Reviewed by: emaste
Noted by: rgrimes [1]
Sponsored by: EMC / Isilon Storage Division
Approved by: re (kib)
The ftp daemon dups the control socket to stdin and uses that fd
throughout the code. Clarify this usage slightly by changing from
explicit use of "0" for the fd to a variable, to make it clear what
the zero represents in the non-blacklist code. Make the
blacklist_notify routine use STDIN_FILENO so as to have less of a
"magic number" feel to the code.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6716
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
The 'CONFS' entries in share/mk/bsd.confs.mk explicitly check
for the 'installconfig', but does not behave properly with the
'distribute' target.
This seems to be related to the previously-reported issues
with files within /etc in the past.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
Check that the dirlist path string specification does not cause
overflow and is fully contained in the hints file.
Check that the dirlist string is nul-terminated.
Make 'hdr' static variable, so that hdr.dirlistlen is available when
hints cached value is used on next function calls. Reset hdr.dirlistlen
to zero if error was detected, so that allocations use reasonable size.
Use 'hints', and not 'p' in the body, since p is only initialized on the
first call.
Reported and reviewed by: truckman (previous version)
Sponsored by: The FreeBSD Foundation
CIDs: 1006503, 1006504, 1006676, 1008488, 1007263
MFC after: 2 weeks
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
MK_TOOLCHAIN==no disables building and installing of pic archives.
c_pic.a is still needed for rtld though so force it to build in lib/libc
and link directly to the objdir version of it for rtld.
Somehow this has been broken since r148725.
Sponsored by: EMC / Isilon Storage Division
segment. According to gABI spec, presence of the tag indicates that
dynamic linker must be prepared to handle relocations against any
read-only segment, not only the segment which we, somewhat arbitrary,
declared the text.
For each read-only segment, add write permission before relocs are
processed, and return to the mapping mode requested by the phdr, after
relocs are done.
Reported, tested, and reviewed by: emaste
PR: 207631
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
The wrapper script has moved to libexec/makewhatis.local since it is not
directlry related to the older makewhatis(1) utility that has been replaced
by the usr.bin/mandoc version.
Reported by: vangyzen
the constraints on what needs to be installed in a specific to
maintain consistency during upgrades.
Create a new clibs package containing libraries that are needed
as a bare minimum for consistency.
With much help and input from: kib
Sponsored by: The FreeBSD Foundation
time ago, but for some reason it was not. Basically, without this change
dlopen(3)'ing an empty .so file would just cause application to dump core
with SIGSEGV.
Make sure the file has enough data for at least the ELF header before
mmap'ing it.
Add a test case to check that dlopen an empty file return an error.
There were a separate discussion as to whether it should be SIGBUS
instead when you try to access region mapped from an empty file,
but it's definitely SIGSEGV now, so if anyone want to check that please
be my guest.
Reviewed by: mjg, cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5112
The dl_iterate_phdr consumer code in libgcc does not expect multiple
callbacks running concurrently. This was fixed once already in r178807,
but accidentally got reverted in r294373.
phdr locks locked. This allows to call rtld services from the
callback, which is only reasonable for dlopen(path, RTLD_NOLOAD) to
test existence of the library in the image, and for dlsym(). The
later might still be not quite safe, due to the lazy resolution of
filters.
To allow dropping the locks around iteration in dl_iterate_phdr(3), we
insert markers to track current position between relocks. The global
objects list is converted to tailq and all iterators skip markers,
globallist_next() and globallist_curr() helpers are added.
Reported and tested by: davide
Reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
transition mechanism, if we don't have /usr/libsoft, assume that soft
float ABI binaries are the default, so treat them as default binaries.
When we've fully transitioned, it will make no sense to do this stat,
and it will be removed.
stackpointer. Userland expects the kernel to pass it an aligned sp and
pass a pointer to the arguments in x0. The kernel side was updated in
r289502, 3 months ago.
Sponsored by: ABT Systems Ltd
MIPS has/had a read-only DYNAMIC segment, and uses an extra level of
indirection (through MIPS_RLD_MAP) to locate the debugger rendezvous
data.
Some linkers (e.g. LLVM's lld) may produce MIPS binaries with a writable
DYNAMIC segment, which would allow us to eventually drop a special case.
Therefore, instead of hardcoding knowledge that DYNAMIC is not writable
on MIPS just check the permissions on the segment.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4791
for the environment variables we look up at runtime. Otherwise,
there's no way they will change, optimize it at compile time.
Differential Review: https://reviews.freebsd.org/D2718
allow later substitution at run time instead of compile time of the
environment variable name prefix.
Differential Review: https://reviews.freebsd.org/D2718
the malloc() + memset() in the local implementation of calloc() into a call
to calloc(), helpfully turning it into an infinite loop. Clean up some
unneeded flags on PPC64 while here.
MFC after: 1 month
"don't know how to make /Versions.def. Stop"
This was trying to define a target in bsd.symver.mk based on LIBCDIR which was
not yet defined. Switching the order of inclusion of bsd.prog.mk and
bsd.symver.mk fixes it and seems fine.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm. Churn would be
reduced if this was able to be limited to direct dependencies.
Sponsored by: EMC / Isilon Storage Division
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
It included libutil.h for setproctitle(3), which was moved from libutil to libc
in r65353 in 2000.
Reviewed by: gshapiro [sendmail change]
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4261
image.
The dynamic linker still requires that program headers of the
executable or dso are mapped by a PT_LOAD segment.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D3871
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
Simplifying maintainance and options (only one place to deal with MK_DMAGENT)
This also makes packaging base less intrusive by getting a single point where
to add tags.
The exists(${DESTDIR}...) check runs with DESTDIR being blank. When the
target runs it does have DESTDIR=${STAGE_OBJTOP} via bsd.sys.mk. This
results in the first execution warning that the symlink is missing. The
second run does run fine. However, this chflags is not needed at all
for META_MODE/STAGING since we never had this path being a schg file
while using META_MODE.
Sponsored by: EMC / Isilon Storage Division
on the Variant II code, however arm64 uses Variant I. The former placed the
thread pointer after the data, pointing at the thread control block, while
the latter places these before said data.
Because of this we need to use the size of the previous entry to calculate
where to place the current entry. We also need to reserve 16 bytes at the
start for the thread control block.
This also fixes the value of TLS_TCB_SIZE to be correct. This is the size
of two unsigned longs, i.e. 2 * 8 bytes.
While here remove the bogus adjustment of the pointer in the
R_AARCH64_TLS_TPREL64 case. It should be the offset of the data relative
to the thread pointer, including the thread control block.
Sponsored by: ABT Systems Ltd
have TLS program header. This is needed on architectures with Variant I
tls, that is arm, arm64, mips, and powerpc. These place the thread control
block at the start of the buffer and, without this, this data may be
trashed.
This appears to not be an issue on mips or powerpc as they include a second
adjustment to move the thread local data, however this is on arm64 (with a
future change to fix placing this data), and should be on arm. I am unable
to trigger this on arm, even after changing the code to move the data
around to make it more likely to be hit. This is most likely because my
tests didn't use the variable in offset 0.
Reviewed by: kib
MFC after: 1 week
Sponsored by: ABT Systems Ltd
Clang emits SSE instructions on amd64 in the common path of
pthread_mutex_unlock. If the thread does not otherwise use SSE,
this usage incurs a context-switch of the FPU/SSE state, which
reduces the performance of multiple real-world applications by a
non-trivial amount (3-5% in one application).
Instead of this change, I experimented with eagerly switching the
FPU state at context-switch time. This did not help. Most of the
cost seems to be in the read/write of memory--as kib@ stated--and
not in the #NM handling. I tested on machines with and without
XSAVEOPT.
One counter-argument to this change is that most applications already
use SIMD, and the number of applications and amount of SIMD usage
are only increasing. This is absolutely true. I agree that--in
general and in principle--this change is in the wrong direction.
However, there are applications that do not use enough SSE to offset
the extra context-switch cost. SSE does not provide a clear benefit
in the current libthr code with the current compiler, but it does
provide a clear loss in some cases. Therefore, disabling SSE in
libthr is a non-loss for most, and a gain for some.
I refrained from disabling SSE in libc--as was suggested--because
I can't make the above argument for libc. It provides a wide variety
of code; each case should be analyzed separately.
https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html
Suggestions from: dim, jmg, rpaulo
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
_rtld_bind. The compiler may generate code using these registers and not
save them. Unfortunately, as we make use of libc, we are unable to disallow
rtld from using floating-point register without also doing the same for the
parts of libc we use, or by limiting what _rtld_bind is able to call.
Obtained from: ABT Systems Ltd
Sponsored by: The FReeBSD Foundation
location pointer when the return value doesn't fit in a register, e.g. when
returning a struct.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
When enough time has passed for users to update their userland the kernel
fix will be applied. This will change the ABI to have x0 point to the args
and sp be correctly aligned.
It is expected this compatibility code can be removed when the kernel and
qemu usermode emulation have both been updated for the new ABI.
This fixes clang failures, and most likely other crashes.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
The requirement is for a GCC-compatible compiler and not necessarily
GCC itself. However, we currently expect any compiler used for building
the whole of FreeBSD to be GCC-compatible and many things will break if
not; there's no longer a need to have an explicit test for this in rtld.
Reviewed by: imp, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2422
According to standard, the presence of the flags only means that the
object path must be resolved at the time object loading, instead of my
reading that the flag is required to enable token substitution at all.
The consequence is that -z origin linker flag is no longer required
for the token substitution in the run/rpath or the needed library
soname. It is only recommended if token substition is needed at
dlopen(3) time, since namecache might drop the required entries at the
time of resolution.
Found, reviewed and tested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
* Add VCREAT flag to indicate when a new file is being created
* Add VVERIFY to indicate verification is required
* Both VCREAT and VVERIFY are only passed on the MAC method vnode_check_open
and are removed from the accmode after
* Add O_VERIFY flag to rtld open of objects
* Add 'v' flag to __sflags to set O_VERIFY flag.
Submitted by: Steve Kiernan <stevek@juniper.net>
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/27
Relnotes: yes
as always participating in the global symbols namespace, regardless of
the way the object was brought into the process address space.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is only an interim fix; MIPS should be using the MI code instead,
which does not have this issue.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D661
ABI specifies that, for R_AARCH64_TLSDESC relocations, we use the symbol
value, addend, and object tls offset to calculate the offset from the tls
base. We then cache this value for future reference.
Differential Revision: https://reviews.freebsd.org/D2183
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
still need libc_pic for a few things, but this is expected to be ready
soon.
Differential Revision: https://reviews.freebsd.org/D2136
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
rtld on x86 to be hidden. This is a micro-optimization, which allows
intrinsic references inside rtld to be handled without indirection
through PLT. The visibility of rtld symbols for other objects in the
symbol namespace is controlled by a version script.
Reviewed by: kan, jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
without any translation. If the file is a symbolic link, $ORIGIN may not be
expanded to the actual origin. Use realpath(3) to properly expand $ORIGIN
to its absolute path.
Reviewed by: kib
MFC after: 1 week
Avoid use of register variables, which some compilers (e.g. clang)
don't like. It makes the code a little clearer as well.
This allows a clang 3.5 built powerpc world to run (tested in a jail).
MFC after: 1 week
The symbol leaked after r276630 since lib/libc/sys/openat.c defines
versions for openat using .symver (version script cannot assign two
versions to one symbol), and rtld uses openat. Instead, directly use
__sys_openat().
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
rtld-elf for powerpc 32 bit:
libexec/rtld-elf/powerpc/reloc.c:486:6: error: taking the absolute value of unsigned type 'Elf_Addr' (aka 'unsigned int') has no effect [-Werror,-Wabsolute-value]
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^
libexec/rtld-elf/powerpc/reloc.c:486:6: note: remove the call to 'abs' since unsigned values cannot be negative
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^~~
1 error generated.
Cast 'offset' to int, since that was intended, and should be safe to do
on architectures with 32-bit two's complement ints.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D1387
it exports to the debugger. It currently has two choices: it can use
a compiled-in path (/libexec/ld-elf.so.1) or it can use the path stored
in the interpreter path in the binary being executed. The runtime linker
currently prefers the second. However, this is usually wrong for compat32
binaries since the binary specifies the path of rtld on a 32-bit system
(/libexec/ld-elf.so.1) instead of the actual path (/libexec/ld-elf32.so.1).
For now, always assume the compiled in path (/libexec/ld-elf32.so.1) as
the rtld path and ignore the path in the binary for the 32-bit runtime
linker.
Differential Revision: https://reviews.freebsd.org/D1236
Reviewed by: kib
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
This implements part of RFC-2217
It's based off a patch originally written by Sujal Patel at Isilon, and
contributions from other Isilon employees.
PR: 173728
Phabric: D995
Reviewed by: markj, markm
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
Linux LD_ITERATE_PHDR(3):
The dlpi_name field is a null-terminated string giving the
pathname from which the shared object was loaded.
That functionality is much more useful than returning just the short
name.
Approved by: kan
Sponsored by: The FreeBSD Foundation
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
e.g. when a global variable is initialized with a pointer to ifunc.
Add symbol type check and call resolver for STT_GNU_IFUNC symbol types
when processing non-PLT relocations, but only after non-IFUNC
relocations are done. The two-phase proceessing is required since
resolvers may reference other symbols, which must be ready to use when
resolver calls are done.
Restructure reloc_non_plt() on x86 to call find_symdef() and handle
IFUNC in single place.
For non-x86 reloc_non_plt(), check for call for IFUNC relocation and
do nothing, to avoid processing relocs twice.
PR: 193048
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
All of the sources for the tests are contained in the
current working directory and the subdirectories
Phabric: D537
Reviewed by: jmmv
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
build time by using atf_tc_get_config_var(tc, "srcdir"))
This will allow end-users to move the binaries to different locations
after they've been built without having to rebuild the binaries with
the new paths
Phabric: D525 (part of a larger patch)
Reviewed by: jmmv
Approved by: jmmv (co-mentor)
As of r126744, we no longer feed the entropy device in jails upon
start, and collecting them is no longer useful.
PR: conf/126744
Submitted by: Eugene Grosbein <eugen grosbein net> (with minor changes)
MFC after: 1 week
Approved by: so (des)
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
With the move of atf-sh into /usr/libexec in r267181, some of the
tests in the integration_test program broke because they could not
execute atf-sh from the path any longer.
This slipped through because I do have a local atf installation in
my home directory that appears in my path, hence the tests could
still execute my own version.
Fix this by forcing /usr/libexec to appear at the beginning of the
path when attempting to execute atf-sh.
To make upgrading easy (and to avoid an unnecessary entry in UPDATING),
make integration_test depend on the Makefile so that a rebuild of the
shell script is triggered. This requires a hack in the *.test.mk files
to ensure the Makefile is not treated as a source to the generated
program. Ugly, I know, but I don't have a better way of doing this at
the moment. Will think of one once I address the TODO in the *.test.mk
files that suggests generalizing the file generation functionality.
PR: 191052
Reviewed by: Garrett Cooper
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
correct stack alignment, however when we have a leaf function that uses
thread local storage it calls __aeabi_read_tp to get the thread pointer.
Neither GCC or clang see this as a function call so will align the stack
to a 4-byte boundary. This may be a problem as _rtld_bind expects to be
on an 8-byte boundary.
The solution is to store a copy of the stack pointer and force the
alignment before calling _rtld_bind.
This fixes a problem with armeb where applications would crash in odd ways.
It should also remove the need for a local patch to clang to force the
stack alignment to an 8-byte boundary, even for leaf functions. Further
testing will be needed before reverting this local change to clang as we
may rely on it in other places.
Reviewed by: jmg@
descriptors in order to relocate RTLD itself. To allocate memory,
we need the pagesizes array initialized, but that happens after
RTLD is relocated. This ordering is important for amd64, but it's
opposite of what ia64 needs. Handle this conflict with the define
called RTLD_INIT_PAGESIZES_EARLY. When defined, obtain the page
sizes before relocating rtld, otherwise do it after.
Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This variable allows the loading of shared libraries via directory descriptors
rather than via library paths. If LD_LIBRARY_PATH_FDS=3:4:12, the directories
represented by file descriptors 3, 4 and 12 will searched for shared libraries
before the normal path-based mechanisms are used. This allows us to execute
unprivileged binaries from within a Capsicum sandbox even if they require
shared libraries.
Approved by: rwatson (mentor)
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
_rtld_debug_postinit(). [1]
- Use __compiler_membar() instead of inline asm in _r_debug_state() and
_r_debug_postinit(). [2]
Pointy hat to: markj [1]
Reported by: attilio [2]
Discussed with: kib
X-MFC-With: r265456
the victim process before its entry point is called, at which point probes
and DOF data are registered with the kernel. The r_debug_state hook cannot
be used for this purpose, as it is called before the program's init routines
are invoked and in particular before DOF data is registered (via drti.o).
Reviewed by: kib
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
first calls mmap() with the arguments PROT_NONE and MAP_ANON to reserve a
single, contiguous range of virtual addresses for the entire shared library.
Later, rtld calls mmap() with the the shared library's file descriptor
and the argument MAP_FIXED to place the text and data sections within the
reserved range. The rationale for mapping shared libraries in this way is
explained in the commit message for Revision 190885. However, this approach
does have an unintended, negative consequence. Since the first call to
mmap() specifies MAP_ANON and not the shared library's file descriptor, the
kernel has no idea what alignment the vm object backing the file prefers.
As a result, the reserved range's alignment is unlikely to be the same as
the vm object's, and so mapping with superpages becomes impossible. To
address this problem, this revision adds the argument MAP_ALIGNED_SUPER to
the first call to mmap() if the text section is larger than the smallest
superpage size.
To determine if the text section is larger than the smallest superpage
size, rtld must always fetch the page size information. As a result, the
private code for fetching the base page size in rtld's builtin malloc is
redundant. Eliminate it. Requested by: kib
Tested by: zbb (on arm)
Reviewed by: kib (an earlier version)
Discussed with: jhb
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
as possible. This does not change the wording in any way.
Remove the 3rd clause ("advertising clause") of the BSD license as
permitted by the University of Berkeley on July 22, 1999. While the
clause itself mentions Lawrence Berkeley Laboratory, UCB is the sole
copyright holder of this file.
Reviewed by: imp, emaste, eadler
MFC after: 2 weeks
Some modules do not align data at least to size of pointer, they uses a
smaller alignment, but our pointer should be aligned to its native
boundary, otherwise on some platforms, hardware alignment checking
will cause bus error.
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
saving the pointer will overwrite bytes belongs to another memory block
unexpectly, to fix the problem, use (allocated address + sizeof(void *)) as
initial value, and slip to next aligned address, so maximum extra bytes is
sizeof(void *) + align - 1.
Tested by: Andre Albsmeier < mail at ma17 dot ata dot myota dot orgndre >
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
the max required alignment for the static tls segments, and honor it
when carving the pieces for next module, from the static space. Use
aligned allocator to get properly-aligned dynamic blocks.
Reported by: dt71@gmx.com
Reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
