Features:
- configurable amount of days between scrubs (default value or per pool)
- do not scrub directly after pool creation (respects the configured
number of days between scrubs)
- do not scrub if a scrub is in progress
- tells how to see the status of the scrub
- tells how many days since the last scrub if it skips the scrubbing
- warns if a non-existent pool is specified explicitely
(default: no pools specified -> all currently imported pools are
handled)
- runs late in the periodic run to not slow down the other periodic daily
scripts
Discussed on: fs@
- .Nd in section NAME is not optional
- .Ed was missing
- "indent" is not a flag, but a literal argument for -offset
- stop switching font sizes for acronyms
- use .Brq instead of rolling our own
This avoids errors or __DECONST() from places with higher WARNS levels.
Adjust a local cache variable in ipcs to const as well
to compile in the new world order.
Suggested by: jhb
Reviewed by: jhb, kib, brueffer (man)
passing through. Modifications are restricted to a subset of C language
operations on unsigned integers of 8, 16, 32 or 64 bit size.
These are: set to new value (=), addition (+=), subtraction (-=),
multiplication (*=), division (/=), negation (= -), bitwise AND (&=),
bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=),
shift right (>>=). Several operations are all applied to a packet
sequentially in order they were specified by user.
Submitted by: Maxim Ignatenko <gelraen.ua at gmail.com>
Vadim Goncharov <vadimnuclight at tpu.ru>
Discussed with: net@
Approved by: mav (mentor)
MFC after: 1 month
[1] Following style for manpages, just do carriage return after a
sentence.
Sponsored by: Sandvine Incorporated
[0] Submitted by: emaste
[1] Submitted by: rwatson
mount(8): add xref to devfs(5)
devfs(5): change example to something more likely to be useful (it is not
necessary to mount a devfs on /dev manually, but for chroots/jails it is
often needed), mention since when devfs is preferred to device nodes on ufs
PR: 146600
MFC after: 2 weeks
The driver is stub. It just creates device entry and feeds
reassembled packets from hardware into it.
If in future we would port wsmouse(4) from NetBSD, or make
sysmouse(4) to support absolute motion events, then the driver
can be extended to act as system mouse. Meanwhile, it just
presents a /dev/uep0, that can be utilized by X driver, that
I am going to commit to ports tree soon.
The name for the driver is chosen to be the same as in NetBSD,
however, due to different USB stacks this driver isn't a port.
Implement an optional delay to the ddb reset/reboot command.
This allows textdumps to be run automatically with unattended reboots
after a resonable timeout, while still permitting an administrator to
break into debugger if attached to the console at the time of the
event for further debugging. Cap the maximum delay at 1 week to avoid
highly accidental results, and default to 15s in case of problems
parsing the timeout value.
Move hex2dec helper function from db_thread.c to db_command.c to make
it generally available and prefix it with a "db_" to avoid namespace
collisions.
Reviewed by: rwatson
MFC after: 4 weeks
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
Note: clock accepts CLOCK_VIRTUAL and CLOCK_PROF too, but this seems broken
as it simply waits for the difference of the current and given value of the
clock as if it were CLOCK_MONOTONIC. So document only CLOCK_REALTIME and
CLOCK_MONOTONIC as allowed.
MFC after: 1 week
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
things allows variable length messages to be easily supported.
- Extend KPI with alq_writen() and alq_getn() to support variable length
messages, which is enabled at ALQ creation time depending on the
arguments passed to alq_open(). Also add variants of alq_open() and
alq_post() that accept a flags argument. The KPI is still fully
backwards compatible and shouldn't require any change in ALQ consumers
unless they wish to utilise the new features.
- Introduce the ALQ_NOACTIVATE and ALQ_ORDERED flags to allow ALQ consumers
to have more control over IO scheduling and resource acquisition
respectively.
- Strengthen invariants checking.
- Document ALQ changes in ALQ(9) man page.
Sponsored by: FreeBSD Foundation
Reviewed by: gnn, jeff, rpaulo, rwatson
MFC after: 1 month
These are specified by POSIX but are not special builtins, and therefore
need to be available via execve() and utilities like time, nohup, xargs.
(Note that hash was moved from the XSI option to the base in the 2008
standard.)
Like most of the POSIX "regular builtin commands", these need to be executed
in a shell environment for full functionality, although they may still be of
some use outside one.
Unlike the POSIX special and regular builtin commands, POSIX does not
require these to be found before a PATH search, although that could be an
oversight.
Like some of the utilities already provided by usr.bin/alias, these may lead
to confusing results when invoked from csh(1).
interface considers that it hits a fatal error, and will not copyout
the request structure back for _IOW and _IOWR ioctls, keeping them
untouched.
The previous implementation of the SIOCGIFDESCR ioctl intends to
feed the buffer length back to userland. However, if we return
an error, the feedback would be defeated and ifconfig(8) would
trap into an infinite loop.
This commit changes SIOCGIFDESCR to set buffer field to NULL to
indicate the previous ENAMETOOLONG case.
Reported by: bschmidt
MFC after: 2 weeks
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
and ipv6_ifconfig_<interface> options have already been deprecated,
these changes do not alter that.
With these changes any value set for ipv6_enable will emit a
warning. In order to avoid a POLA violation for the deprecation
of the option ipv6_enable=NO will still disable configuration
for all interfaces other than lo0. ipv6_enable=YES will not have
any effect, but will emit an additional warning. Support and
warnings for this option will be removed in FreeBSD 10.x.
Consistent with the current code, in order for IPv6 to be configured
on an interface (other than lo0) an ifconfig_<interface>_ipv6
option will have to be added to /etc/rc.conf[.local].
1. Clean up and minor optimizations for the following functions:
ifconfig_up (the ipv6 elements)
ipv6if
ipv6_autoconfif
get_if_var
_ifconfig_getargs
The cleanups generally were to move the "easy" tests earlier in the
functions, and consolidate duplicate code.
2. Stop overloading ipv6_prefer with the ability to disable IPv6
configuration.
3. Remove noafif() which was only ever called from ipv6_autoconfif.
Instead, simplify and integrate the tests into that function, and
convert the test to use is_wired_interface() instead of listing
wireless interfaces explicitly.
4. Integrate backwards compatibility for ipv6_ifconfig_<interface>
into _ifconfig_getargs. This dramatically simplifies the code in
all of the callers, and avoids a lot of other code duplication.
5. In rc.d/netoptions, add code for an ipv6_privacy option to use
RFC 4193 style pseudo-random addresses (this is what windows does
by default, FYI).
6. Add support for the [NO]RTADV options in ifconfig_getargs() and
ipv6_autoconfif(). In the latter, include support for the explicit
addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done
in the current code.
7. In rc.d/netif add a warning if $ipv6_enable is set, and remove
the set_rcvar_obsolete for it. Also remove the latter from
rc.d/ip6addrctl.
8. In /etc/defaults/rc.conf:
Add an example for RTADV configuration.
Set ipv6_network_interfaces to AUTO.
Switch ipv6_prefer to YES. If ipv6_enable is not set this will have
no effect.
Add a default for ipv6_privacy (NO).
9. Document all of this in rc.conf.5.
are some problems with static executables), make.conf (would also
affect ports which do not use GNU make and do not override the
compile targets) or in the kernel config (via "makeoptions
WITH_CTF=yes").
Additional (related) changes:
- propagate WITH_CTF to module builds
- do not add -g to the linker flags, it's a noop there anyway
(at least according to the man page of ld)
- do not add -g to CFLAGS unconditionally
we need to have a look if it is really needed (IMO not) or if there
is a way to add it only when WITH_CTF is used
Note: ctfconvert / ctfmerge lines will not appear in the build output,
to protect the innocent (those which do not build with WITH_CTF would
see the shell-test and may think WITH_CTF is used).
Reviewed by: imp, jhb, scottl (earlier version)
Discussed on: arch@
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Blessed by: kientzle
With hat: secteam
MFC after: 3 days
At least in RELENG_7 this fixes some start problems for some programs
from the ports. It is also more correct, as a jail shall not expect
input (interactivity) from the jail-host.
Revert the current behavior of starting jails in the background and
make it optional only for the start of jails (jail_parallell_start=YES
in rc.conf):
- The stop can not be done in the background, the system needs to wait
until everything is stopped correctly before it can reboot or power
down.
- The start should not be done in parallel by default, this not only
breaks POLA for people comming from RELENG_x, it may also break a
dependency chain with other scripts in the jail-host, which need to
do some stuff after the jails are up and running (e.g. hardlinking
a mysql socket from one jail into another one).
Discussed on: freebsd-jails@
also move to a 2-clause license. From n_hibma@:
"The 3rd clause was originally there for a reason, but I guess that it is
safe to assume that no one can assume endorsement by me or anyone else
without prior consent on anything really, so we might as well remove that
clause."
Approved by: n_hibma
HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.
HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.
For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.
Sponsored by: FreeBSD Foundation
Sponsored by: OMCnet Internet Service GmbH
Sponsored by: TransIP BV
o uses v4 firmware instead of v3. A port will be committed to create
the bwn firmware module.
o supports B/G and LP(low power) PHYs.
o supports 32 / 64 bits DMA operations.
o tested on big / little endian machines so should work on all
architectures.
It'd not connected to the build until the firmware port is committed.
specify list of executables and/or rc scripts that should be executed
after firewall starts/stops.
Submitted by: Yuri Kurenkov <y dot kurenkov at init dot ru>
Reviewed by: rhodes, rc@
MFC after: 1 week
brightness, wired LAN power and bass gain), and update the description of
one previously unknown feature (display contrast). While here, expand on
a comment and remove two defines left over from an old version of the code.
Also update man page to document the above changes, and correct grammar.
PR: kern/127581
maximum file size limit. Default is UINT64_MAX when the option is
not specified. It was useless to set the limit to the total amount of
memory and swap in the system.
Use tmpfs_mem_info() rather than get_swpgtotal() in tmpfs_mount() to
check if there is enough memory available.
Remove now unused get_swpgtotal().
Reviewed by: Gleb Kurtsou
Approved by: trasz (mentor)
In the current code, the locking is completely broken and may lead
easilly to deadlocks. Fix it by using the proc_mtx, linked to the
suspending thread, as lock for the operation. Keep using the
thread_lock for setting and reading the flag even if it is not entirely
necessary (atomic ops may do it as well, but this way the code is more
readable).
- Fix a deadlock within kthread_suspend().
The suspender should not sleep on a different channel wrt the suspended
thread, or, otherwise, the awaker should wakeup both. Uniform the
interface to what the kproc_* counterparts do (sleeping on the same
channel).
- Change the kthread_suspend_check() prototype.
kthread_suspend_check() always assumes curthread and must only refer to
it, so skip the thread pointer as it may be easilly mistaken.
If curthread is not a kthread, the system will panic.
In collabouration with: jhb
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC: 2 weeks
if_initname().
- Document if_drv_flags and replace references to IFF_(RUNNING|OACTIVE)
with references to IFF_DRV_(RUNNING|OACTIVE).
- Complete truncated sentence in the description of if_transmit by copying
from the description in if_qflush.
- Add missing line breaks for translators.
Reviewed by: brooks (1)
MFC after: 3 days
<sys/proc.h>.
- Add RETURN VALUES and ERROR sections for namei()'s error return values.
- Add a missing link to NDHASGIANT.9.
PR: docs/142815, docs/142816
Submitted by: Lachlan Kang (1, 2)
MFC after: 3 days
using the wlan(4) debugging controls with wording slightly
different from that in the PR.
PR: 142367
Submitted by: Matthew Thyer <matt.thyer@gmail.com>
MFC after: 2 weeks
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.
Obtained from: Fredrik Lindberg <fli@shapeshifter.se>
While the name is pretentious, a good explanation of its targets is
reported in this 17 months old presentation e-mail:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html
In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq
rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.
Reviewed by: jeff
Tested by: pho, Giovanni Trematerra
Sponsored by: Nokia Incorporated, Sandvine Incorporated
MFC after: 2 weeks
wlan(4) interfaces. vlan(4) interfaces are listed via a new 'vlans_<IF>'
variable. If a vlan interface is a number, then that number is treated as
the vlan tag for the interface and the interface will be named '<IF>.<tag>'.
Otherwise, the vlan tag must be provided via a vlan parameter in a
'create_args_<vlan>' variable.
While I'm here, fix a few nits in rc.conf(5) and mention create_args_<IF> in
the description of cloned_interfaces.
Reviewed by: brooks
MFC after: 2 weeks
it mentioned only VT6122. While I'm here remove the mention of
VT3119 which seems to be VIA's internal model name and VT3119
wouldn't be available to end users.
Reviewed by: brueffer
This tunable allows one to enable (1) or disable (0) gestures like tap
and tap-hold on Synaptics TouchPad when the Extended mode isn't enabled
(ie. "hw.psm.synaptics_support" not set).
By default, the value is -1 in order to keep the current behaviour of
not enabling/disabling gestures explicitly.
PR: kern/139272
Submitted by: David Horn <dhorn2000 AT gmail DOT com>
Reviewed by: David Horn <dhorn2000 AT gmail DOT com>
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
Reviewed by: des, gavin, rpaulo
MFC after: 3 weeks
attach chips with generic Marvell (non-HighPoint) PCI identification.
These chips are also supported by ata(4). Some vendors, like Supermicro,
are using same chips without providing HPT RAID BIOS.
PR: kern/120842, kern/136750
In r198272 I didn't notice that watchdog(8) and watchdogd(8)
are different things and instead of fixing watchdogd markup
I simply nuked the line.
Noticed by: emaste
Pointy hat to: avg
and a google search yields no alternative). Remove the links but
keep the entries around for reference.
PR: 139756
Submitted by: Patrick Oonk <patrick@pine.nl>
MFC after: 3 days
handlers. This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
a description with an active interrupt handler setup by BUS_SETUP_INTR.
It has a default method (bus_generic_describe_intr()) which simply passes
the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
an interrupt handler and copy the name passed to intr_event_add_handler()
into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64 and i386 by having
the nexus(4) driver supply a custom bus_describe_intr method that invokes
a new intr_describe() MD routine which in turn looks up the associated
interrupt event and invokes intr_event_describe_handler().
Requested by: many
Reviewed by: scottl
MFC after: 2 weeks