When compiling RACK on platforms using gcc, a warning that tcp_outflags
is defined but not used is issued and terminates compilation on PPC64,
for example. So don't indicate that tcp_outflags is used.
Reviewed by: rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D20971
These are mostly compatible with Linux, with three exceptions.
1. We don't do metadata segment stuff. Our passthrough interface
doesn't cope. The code is there, but generates an error.
2. Linux lets you specify a namespace ID for the command. We current
do not: we get ours from the namespace device, or pass in a generic
one. Generally, this will lead to the same command, but FreeBSD's
is safer since you can't specify the wrong id.
3. --show-command outputs to stderr instead of stdout so you can both
see your command, and capture its output with a simple redirect.
Differential Revision: https://reviews.freebsd.org/D19296
Create a set of routines and structures to hold the data for the args
for a command. Use them to generate help and to parse args. Convert
all the current commands over to the new format. "comnd" is a hat-tip
to the TOPS-20 %COMND JSYS that (very) loosely inspired much of the
subsequent command line notions in the industry, but this is far
simpler (the %COMND man page is longer than this code) and not in the
kernel... Also, it implements today's de-facto
command [verb]+ [opts]* [args]*
format rather than the old, archaic TOPS-20 command format :)
This is a snapshot of a work in progress to get the nvme passthru
stuff committed. In time it will become a private library and used
by some other programs in the tree that conform to the above pattern.
Differential Revision: https://reviews.freebsd.org/D19296
This constant determines the number of rights libnv will attempt to
transmit in a given control message. In practice, the upper limit
defined by the kernel is machine-dependent and is smaller on 64-bit
kernels than on 32-bit kernels. To ensure that a 32-bit libnv works
as expected when run on a 64-bit kernel, use a limit that will work
on both 32-bit and 64-bit kernels.
PR: 238511
Discussed with: oshogbo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20942
In both cases, function pointer arguments were inconsistently declared
and the result worked because of C's odd rules around function pointer
(de)references. With a stricter compiler these fail to compile.
Reviewed by: cem
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20964
Add format capability to core file names to include signal
that generated the core. This can help various validation workflows
where all cores should not be considered equally (SIGQUIT is often
intentional and not an error unlike SIGSEGV or SIGBUS)
Submitted by: David Leimbach (leimy2k@gmail.com)
Reviewed by: markj
MFC after: 1 week
Relnotes: sysctl kern.corefile can now include the signal number
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20970
r350004 added most of the machinery needed to support hardware DBM
management, but it did not intend to actually enable use of the hardware
DBM bit.
Reviewed by: andrew
MFC with: r350004
Sponsored by: The FreeBSD Foundation
After r349117 and r349122, some mapping attribute changes do not trigger
superpage demotion. However, pmap_demote_l2() was not updated to ensure
that the replacement L3 entries carry any attribute changes that
occurred since promotion.
Reported and tested by: manu
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20965
this implicitly by encoding it in a number space.
No functional change intended.
This is done as a preparation to add support for ICMPv6 mesages
indicating a parameter problem related to the next header.
MFC after: 2 weeks
This fixes the following panic on powerpc:
pci_get_vendor failed for pcib1 on bus ofwbus0, error = 2
PR: 238730
Reported by: Dennis Clarke <dclarke@blastwave.org>
Tested by: Dennis Clarke <dclarke@blastwave.org>
MFC after: 2 weeks
'=' asm constraint marks a variable as write-only. Because of this, gcc
throws away the initialization of 'res', causing garbage to be returned if
the CAS was successful. Use '+' to mark res as read/write, so that the
initialization stays in the generated asm. Also, fix the reservation
clearing stwcx store index register in casueword32, and only do the dummy
store when needed, skip it if the real store has already succeeded.
gcc hates dt < CC_DT_NONE since it can never be true when dt is an unsigned
type. Since that's a compiler choice and may be affected by weird stuff, instead
use (unsigned)dt > CC_DT_UNKNOWN to test for bounds error since that will work
regardless of the signedness of dt.
List the device's protocol. The returned value is one of the following:
ata direct attach ATA or SATA device
satl a SATA device attached via SAS
scsi A parallel SCSI or SAS
nvme A direct attached NVMe device
mmcsd A MMC or SD attached device
Reviewed by: scottl@, rpokala@
Differential Revision: https://reviews.freebsd.org/D20950
This ptrace operation returns a structure containing the error and
return values from the current system call. It is only valid when a
thread is stopped during a system call exit (PL_FLAG_SCX is set).
The sr_error member holds the error value from the system call. Note
that this error value is the native FreeBSD error value that has _not_
been translated to an ABI-specific error value similar to the values
logged to ktrace.
If sr_error is zero, then the return values of the system call will be
set in sr_retval[0] and sr_retval[1].
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20901
on PCx2129 chips too.
The datasheet for the PCx2129 chips says that there is only a watchdog
timer, no countdown timer. It turns out the countdown timer hardware is
there and works just the same as it does on a PCx2127 chip, except that you
can't use it to trigger an interrupt or toggle an output pin. We don't need
interrupts or output pins, we only need to read the timer register to get
sub-second resolution. So start treating the 2129 chips the same as 2127.
An obscure footnote in the datasheets for the PCx2127, PCx2129, and
PCF8523 rtc chips states that the chips do not support i2c repeat-start
operations. When the driver was originally written and tested, the i2c
bus on that system also didn't support repeat-start and just quietly
turned repeat-start operations into a stop-then-start, making it appear
that the nxprtc driver was working properly.
The repeat-start situation only comes up on reads, so instead of using
the standard iicdev_readfrom(), use a local nxprtc_readfrom(), which is
just a cut-and-pasted copy of iicdev_readfrom(), modified to send two
separate start-data-stop sequences instead of using repeat-start.
syscallret() doesn't use error anymore. Fix a few other places to permit
removing the return value from syscallenter() entirely.
- Remove a duplicated assertion from arm's syscall().
- Use td_errno for amd64_syscall_ret_flush_l1d.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D2090
Early errors prior to a system call did not set td_errno. This commit
sets td_errno for all errors during syscallenter(). As a result,
syscallret() can now always use td_errno without checking TDP_NERRNO.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20898
Most people know SAS attached SATA devices by the name SAT or SATL
(with the latter being a little more common). Change the device type
ATA_BEHIND_SCSI to SATL since it's more specific and meaningful.
Suggested by: scottl@
Previously the arm64 pmap did no reference or modification tracking;
all mappings were treated as referenced and all read-write mappings
were treated as dirty. This change implements software management
of these attributes.
Dirty bit management is implemented to emulate ARMv8.1's optional
hardware dirty bit modifier management, following a suggestion from alc.
In particular, a mapping with ATTR_SW_DBM set is logically writeable and
is dirty if the ATTR_AP_RW_BIT bit is clear. Mappings with
ATTR_AP_RW_BIT set are write-protected, and a write access will trigger
a permission fault. pmap_fault() handles permission faults for such
mappings and marks the page dirty by clearing ATTR_AP_RW_BIT, thus
mapping the page read-write.
Reviewed by: alc
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20907
pmap_ts_referenced() does not necessarily clear the access bit from
all accessed mappings of a given page. Thus, if a scan of the mappings
needs to be restarted, we should be careful to avoid double-counting
accessed mappings whose access bits were not cleared in a previous
attempt.
Reported by: alc
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20926
Remove RELEASE_CRUNCH here. It's obsolete and hasn't worked in a while. The
build options need to be revisited, since many older ones are listed, while
newer useful ones are not. But that rototilling I'll leave to others.
We remove IPSEC only in parts of the tree, and not others. RELEASE_CRUNCH to
disable it has not kept up with all its uses. Remove it. Should there be a real
need to disable IPSEC, one that hasn't shown up in the base system to date,
it can be re-added behind a WITHOUT_IPSEC build option.
If umtxq_check_susp() indicates an exit, we should clean the resources
before returning. Do it by breaking out of the loop and relying on
post-loop cleanup.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D20949
After r349951, the return code must be checked instead of old == new
comparision.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D20949
Since these things are more completely controlled by the MK_OPENSSL knob, remove
RELEASE_CRUNCH here. It's no longer needed for the release and other users can
use the more proper knob if they so desire.
The RELEASE_CRUNCH check is redundant here. We don't need it for releases
anymore, and picobsd can control this more directly without making it a special
case.
When using the SOL_SOCKET level socket option SO_LINGER, the structure
struct linger is used as the option value. The component l_linger is of
type int, but internally copied to the field so_linger of the structure
struct socket. The type of so_linger is short, but it is assumed to be
non-negative and the value is used to compute ticks to be stored in a
variable of type int.
Therefore, perform input validation on l_linger similar to the one
performed by NetBSD and OpenBSD.
Thanks to syzkaller for making me aware of this issue.
Thanks to markj@ for pointing out that a similar check should be added
to so_linger_set().
Reviewed by: markj@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20948
get BBRv1 into the tree. This fixes the DSACK bug but
is also needed by BBR. We have yet to go two more
one will be for the pacing code (tcp_ratelimit.c) and
the second will be for the new updated LRO code that
allows a transport to know the arrival times of packets
and (tcp_lro.c). After that we should finally be able
to get BBRv1 into head.
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D20908
