The problem with it was a bogus .OBJDIR in some cases where creation of
object directories were purposely not attempted, such as for 'make cleandir'
and in etc/ sub-directories. In these cases bmake would start with a
bogus .OBJDIR like etc/ due to MAKEOBJDIR being a dynamic value based on
.CURDIR, SRCTOP, and OBJTOP. OBJTOP would not yet be defined but is
during early src.sys.obj.mk. That file and auto.obj.mk both were not
modifying .OBJDIR unless they expected to create the objdir. Thus in
these cases the .OBJDIR was left as etc/* rather than fixed to the
proper .CURDIR.
The issues were fixed in r325404 and r325416. An assertion to avoid the
bad .OBJDIR was added in r325405.
Sponsored by: Dell EMC Isilon
Despite the fact that it's a working solution, it doesn't follow the design
philosophy of only doing TARGET_* in Makefile.inc1 and special locations in
the source tree.
PR: 222925
Requested by: imp
- Define TARGET_CPUARCH and use in libclang_rt as the basis for CRTARCH
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
If TARGET_ARCH isn't defined (host-builds), fallback to MACHINE_ARCH.
- Define CRTARCH to armhf when TARGET/TARGET_ARCH are set to arm/armv[67]
TARGET_ABI/TARGET_CPU in Makefile.inc1 sets the ABI to gnueabihf, which
affects the clang lookup path per `getArchNameForCompilerRTLib(..)` in
contrib/llvm/tools/clang/lib/Driver/ToolChain.cpp, so chase clang and
Linux's assumed naming convention for hard-float arm architectures.
CROSSENV (in Makefile.inc1) sets CPUTYPE/MACHINE(_ARCH)? to the
TARGET*-relevant values when building the `libraries` target, so test
those variables instead.
- Add OLD_FILES/OLD_LIBS entries for TARGET/TARGET_ARCH == arm/armv[67]. This
impacts only arm/armv6 and arm/armv7.
PR: 222925
of this kind. Describe how to compile the driver into the kernel
and how to load it as a module.
This is useful for people using the MINIMAL kernel configuration file.
PR: 218610
Submitted by: Harald Schmalzbauer (bugzilla.freebsd@omnilan.de)
Reviewed by: noone (1 month inactivity)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12271
Apparently they have SRCTOP set, but won't have RELDIR set since they are
not in-tree.
Pointyhat to: bdrewery
Reported by: O. Hartmann <ohartmann@walstatt.org>, dhw
Tested by: dhw
Sponsored by: Dell EMC Isilon
The cleanobj target will not really remove the OBJDIR in this case,
it will only remove the OBJDIR if only clean targets are ran.
Sponsored by: Dell EMC Isilon
When AUTO_OBJ is enabled this change becomes redundant with the auto.obj.mk
check added in r325404. However, it is possible that new code is added
at some point between src.sys.obj.mk and auto.obj.mk that disables AUTO_OBJ.
That could leave make with a bogus and unsafe .OBJDIR in some cases.
Sponsored by: Dell EMC Isilon
auto.obj.mk is loaded before the Makefile which may have NO_OBJ set inside of
it. In that case we can't avoid creating the OBJDIR but we do need to avoid
using it. Fixing .OBJDIR in bsd.init.mk at least fixes all of the build .mk
files to have a proper .OBJDIR. It does not fix the Makefile itself but
usually if they have NO_OBJ set they are not inspecting ${.OBJDIR} anyhow.
It is ideal to only have this in bsd.init.mk and to remove it from bsd.obj.mk,
but then bsd.obj.mk would need to include bsd.init.mk. Doing something like
that would require more testing. It has been proposed that bsd.obj.mk not be
included directly but it has been possible for too long to do so to change it
at this point.
Note too that it may make sense to fix .OBJDIR even when AUTO_OBJ is not
enabled but the historical behavior has always been that NO_OBJ just avoids
running 'make obj', so .OBJDIR should already be .CURDIR.
Also while NO_OBJ seems like it should be removed at this point, it is not
always possible to fix Makefiles to properly use an .OBJDIR. The cost of
keeping NO_OBJ support is minimal.
Sponsored by: Dell EMC Isilon
Forcing MK_AUTO_OBJ to no is not really needed since bsd.obj.mk is protected
against 'rm -rf ${.CURDIR}' already. It was also flawed as if MK_AUTO_OBJ=yes
was in the .MAKEOVERRIDES already then it just remained on.
Sponsored by: Dell EMC Isilon
If for any reason we cannot set .OBJDIR==_objdir as desired
use .CURDIR so that at least the classic
.if ${.OBJDIR} != ${.CURDIR}
works and dangerous misstakes can be avoided.
Reviewed by: bdrewery
NO_OBJ has a very specific meaning in sub-directories in that no object
directory will be made. If a user wanted to skip the 'make obj' phase then
passing -DNO_OBJ would break all sub-directories from building properly. Using
NO_OBJ internally also causes issue with NO_OBJ handling being added in
share/mk/bsd.init.mk soon.
Sponsored by: Dell EMC Isilon
fine when a lot of different flows to be ciphered/deciphered are involved.
However, when a software crypto driver is used, there are
situations where we could benefit from making crypto(9) multi threaded:
- a single flow is to be ciphered: only one thread is used to cipher it,
- a single ESP flow is to be deciphered: only one thread is used to
decipher it.
The idea here is to call crypto(9) using a new mode (CRYPTO_F_ASYNC) to
dispatch the crypto jobs on multiple threads, if the underlying crypto
driver is working in synchronous mode.
Another flag is added (CRYPTO_F_ASYNC_KEEPORDER) to make crypto(9)
dispatch the crypto jobs in the order they are received (an additional
queue/thread is used), so that the packets are reinjected in the network
using the same order they were posted.
A new sysctl net.inet.ipsec.async_crypto can be used to activate
this new behavior (disabled by default).
Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae, jmg, jhb
Differential Revision: https://reviews.freebsd.org/D10680
Sponsored by: Stormshield
This is to prevent downstream checks from assuming they can trust .OBJDIR when
MK_AUTO_OBJ is yes, such as the bsd.obj.mk checks.
Pointyhat to: bdrewery
Sponsored by: Dell EMC Isilon
This will force any existing objects to rebuild if their .meta
files reference files from WORLDTMP. This is a problem after
the UNIFIED_OBJDIR effort caused buildworld and DIRDEPS_BUILD
to share an OBJDIR. Without cleaning these files the
Makefile.depend files end up with odd tmp/legacy/... entries
since some bootstrap-tools linger from there and otherwise
don't rebuild. Removing the files causes anything having
used WORLDTMP to rebuild.
Sponsored by: Dell EMC Isilon
This can be disabled by putting WITHOUT_AUTO_OBJ=yes in /etc/src-env.conf, not
/etc/src.conf, or passing it in the environment.
The purpose of this rather than simply flipping the default of AUTO_OBJ to yes
is to avoid hassling users with auto.obj.mk failures if the wanted OBJDIR is
not writable. It will fallback to writing to the source directory like it does
today if MAKEOBJDIRPREFIX is not writable.
The act of enabling MK_AUTO_OBJ disables all 'make obj' treewalks since
previous work has made those not run if MK_AUTO_OBJ==yes in Makefile.inc1.
Relnotes: yes
Reviewed by: sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12841
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
Some devices (P5040, P4080) have multiple frame managers in their DPAA
subsystems. This was prevented by use of a softc singleton in the DPAA
driver. Since if_dtsec(4) has moved to be a child of fman, it can access
the fman device data via the parent object.
