Scrt1_c.o was accidentally compiled with -DGCRT (profiling), like gcrt1_c.o.
This problem is i386-specific, the other architectures are OK.
If you have problems with PIE executables such as samba and cups leaving
behind gmon files, rebuild them after installing this change.
PR: ports/143924
Reviewed by: kib
MFC after: 3 days
Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and
lower it when needed.
I'm setting WARNS?=0 for secure/. It seems secure/ includes the
Makefile.inc provided by lib/. I'm not going to touch that directory.
Most of the code there is contributed anyway.
Scrt1.o instead of crt1.o, since the later is built as non-PIC.
Separate i386-elf crt1.c into the pure assembler part and C code,
supplying all data extracted by assembler stub as explicit parameters [1].
Hide and localize _start1 symbol used as an interface between asm and
C code.
In collaboration with: kan
Inspired by: PR i386/127387 [1]
Prodded and tested by: rdivacky [1]
MFC after: 3 weeks
in 1993 in rev.1.5 of the i386 a.out version (csu/i386/crt0.c).
Profiling uses a magic label "eprol" to delimit the start of the part
of the text section covered by profiling. This label must be placed
before the call to main() to get main() properly profiled. It was
placed there in rev.1.1 of crt0.c. Rev.1.5 imported the initial
implementation of shared libraries in FreeBSD and misplaced the label.
Fortunately, the misplaced label was misspelled and the old label
wasn't removed, so the new label had no effect. Unfortunately, when
profiling was implemented for the ELF in 1998 in rev.1.2 of
csu/i386-elf/crt1.c, only the incorrectly placed label was copied
(after fixing its name). The bug was then copied to all other arches.
The label seems to be still misplaced in NetBSD for most arches. It
is in common.c for most arches so it is even further from being inside
the function that calls main().
I think "eprol" is short for "end of prologue", but it must be placed
before the end of the prologue so that it covers main(). crt0.c has
it before the calls atexit(_mcleanup) and monstartup(...), but it
cannot affect these calls so I moved it after the call to monstartup().
It now also covers the call to _init() but not the newer call to
_init_tls(). Profiling of _init() seems to be harmless, and the call
to _init_tls() seems to be misplaced.
Reviewed by: jdp (long ago, for a slightly different i386 version)
that use SSE. The compiler does attempt to do this in main() but not very
successfully - it still manages to use unaligned offsets from %ebp in some
cases. Also we need to have an aligned stack in case something uses SSE
via _init().
MFC After: 1 week
- -elf in CFLAGS had no effect except to reduce portability.
- -elf in LDFLAGS had even less effect, since LDFLAGS is not used.
- -Wall in CFLAGS had no effect except to reduce portability and break
overriding of WARNS, since the setting of WARNS implies -Wall.
since it has been MFC'ed. See the log message for the previous commit
for more details. The alignment bug in gcc-3 has not been fixed, but
it is not very serious and the previous commit just moved it (as intended).
Approved by: re (murray)
-fomit-frame-pointer is not used). This is mostly moot for -current
because gcc-3 does the alignment (slightly incorrectly) in main().
This patch is intended for easy MFC'ing and should be backed out in
-current soon since it causes compiler warnings and better fixes are
possible in -current. The best fix is to do nothing here and wait for
gcc to do stack alignment right. gcc-3 aligns the stack in main(), but
does it too late for main()'s local variables and too late for anything
called before main(). A misaligned stack is now more than an efficiency
problem, since some SSE instructions in some or all (hardware)
implementations trap on misaligned operands even if alignment checking
is not enabled.
PR: 41528:
Submitted by: NIIMI Satoshi <sa2c@sa2c.net> (original version)
MFC after: 3 days
Assembler macros are tidied up and made as similar as sanely possible.
The macros are translated into C (__inline static) functions for lint.
Declaration orders are made the same.
Declarations are all ISOfied and tidied up.
Comment contents have gratuitous diffs removed.
The net result is a bunch of crt1.c's that are 90% the same.
It may be possible to now encapsulate the differences in one
MD header, and have only one MI crt1.c file (although the macros
to do this may be ugly).
Helpful comments by: obrien, bde
Alpha tested by: des
i386-elf tested by: markm
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
except to generate spurious warnings about a system header <sys/param.h>
having some inline functions (the bswap family). This backs out the main
part of rev.1.5 (which was the only part left). The problem fixed by
rev.1.5 of the Makefile went away in rev.1.5 of ../common/crtbegin.c
when the references to do_ctors() and do_dtors() in the latter were moved
from inline asm to C code.
This leaves the problem that implementation details cause warnings.
Discussed with: jdp
Also, make an internal _getprogname() that is used only inside
libc. For libc, getprogname(3) is a weak symbol in case a
function of the same name is defined in userland.
when using the egcs and gcc-devel ports, along with GCC built from stock
public FSF sources. With out this change, FreeBSD will be removed from
the list of systems GCC 3.0 must be evaluated on before release. With
the effort some of us put into getting FreeBSD on this list, we should
not turn this effort into a waste, else we might not be worth fighting
for in the future. (note that Alpha and IA-64 versions of crt{i,n}.S
are needed)
* Switch from our own crt{begin,in} to those created from GCC's crtstuff.c.
This will allow us to switch to DWARF2 exceptions in the future, along with
staying in sync with any future GCC requirements.
* Break out our ELF branding bits into a seperate file. Currently this
is now included by our crt1.c files (since this functionality was part of
our native crtbegin.c). Later crtbrand.o will be merged in the creation
of crti.o.
various architectures. Now all the work is done in crtbegin.c.
It doesn't contain any assembly language code, so it should work
fine on all architectures. (I have tested it on the i386 and the
alpha.) The old assembly language files crt[in].S are now empty
shells that generate no code or data. They should not be removed
any time soon, because the various versions of gcc in src and ports
expect them to exist.
Next I will move crtbegin.c into a new common machine-independent
directory, and adjust the i386-elf Makefile to use that version.
After that I will adjust the alpha Makefile to use the common
version too.
Requested by: obrien
maintainers.
After we established our branding method of writing upto 8 characters of
the OS name into the ELF header in the padding; the Binutils maintainers
and/or SCO (as USL) decided that instead the ELF header should grow two new
fields -- EI_OSABI and EI_ABIVERSION. Each of these are an 8-bit unsigned
integer. SCO has assigned official values for the EI_OSABI field. In
addition to this, the Binutils maintainers and NetBSD decided that a better
ELF branding method was to include ABI information in a ".note" ELF
section.
With this set of changes, we will now create ELF binaries branded using
both "official" methods. Due to the complexity of adding a section to a
binary, binaries branded with ``brandelf'' will only brand using the
EI_OSABI method. Also due to the complexity of pulling a section out of an
ELF file vs. poking around in the ELF header, our image activator only
looks at the EI_OSABI header field.
Note that a new kernel can still properly load old binaries except for
Linux static binaries branded in our old method.
*
* For a short period of time, ``ld'' will also brand ELF binaries
* using our old method. This is so people can still use kernel.old
* with a new world. This support will be removed before 5.0-RELEASE,
* and may not last anywhere upto the actual release. My expiration
* time for this is about 6mo.
*
levels (-O3 and above) won't remove essential code. Many thanks
to Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru> for pointing out
that it was the optimizer's removal of this code that caused make
world with -O3 to break. With this change, make buildworld now
completes.
shared library when invoking global constructors and destructors.
For constructors, the object files used to be processed from first
to last; now they're done from last to first. (Destructors are done
in the opposite order, as required by the C++ standard.) This makes
us consistent with standard gcc and egcs compilers. It also
eliminates ordering differences between dynamic and static
executables.
Bump the value of __FreeBSD_version to 400002 to reflect this
change.
C function so the compiler won't try to emit line numbers for it
with "-g", breaking the build. This has the nice side-effect of
making crtbegin.o and crtbeginS.o a little bit smaller.
Remove "-Wno-unused" from the Makefile. Replace it with "__unused"
on particular function and variable declarations.
than ".so". The old extension conflicted with well-established
naming conventions for dynamically loadable modules.
The "clean" targets continue to remove ".so" files too, to deal with
old systems.
the executable file, so it will work for both a.out and ELF format
files. I have split the object format specific code into separate
source files. It's cleaner than it was before, but it's still
pretty crufty.
Don't cheat on your make world for this update. A lot of things
have to be rebuilt for it to work, including the compiler and all
of the profiled libraries.
