find_geom() in some classes trim leading "/dev/" from geom names.
Lack of that in geom_gettree_geom() broke some existing scripts.
PR: 262554
MFC after: 2 months
To allow for a future 16k or 64k page size we need to tell libkvm which
is being used. Add a flag field in unused space in minidumphdr and use
it to signal between the different options.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34548
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
Traditionally the GEOM's primary channel of information from kernel to
user-space was confxml, fetched by libgeom through kern.geom.confxml
sysctl. It is convenient and informative, representing full state of
GEOM in a single XML document. But problems start to arise on systems
with hundreds of disks, where the full confxml size reaches many
megabytes, taking significant time to first write it and then parse.
This patch introduces alternative solution, allowing to fetch much
smaller XML document, subset of the full confxml, limited to 64KB and
representing only one specified geom and optionally its parents. It
uses existing GEOM control interface, extended with new "getxml" verb.
In case of any error, such as the buffer overflow, it just transparently
falls back to traditional full confxml. This patch uses the new API in
user-space GEOM tools where it is possible.
Reviewed by: imp
MFC after: 2 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D34529
Preferably bcmp would just alias memcmp but there is build magic which
makes this problematic.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28846
Support the "usr" and "os" qualifiers on arm64 events to restrict
event counting to either usermode or the kernel, respectively. If
neither qualifier is given, events are counted in both.
Reviewed by: emaste
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34527
- Refine the checks for ARM mapping symbols and apply them on arm64 as
well as 32-bit arm. In particular, mapping symbols can have
additional characters and are not strictly limited to just "$a" but
can append additional characters (e.g. "$a.1"). Add "$x" to the
list of mapping symbol prefixes.
- Clear the LSB of function symbol addresses. Thumb function
addresses set the LSB to enable Thumb mode. However, the actual
function starts at the aligned address with LSB clear. Not clearing
the LSB can cause pmcannotate to pass misaligned addresses to
objdump when extracting disassembly.
Reviewed by: andrew
Obtained from: CheriBSD
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34416
Some PCI devices especially GPUs require a ROM to work properly.
The ROM is executed by boot firmware to initialize the device.
To add a ROM to a device use the new ROM option for passthru device
(e.g. -s passthru,0/2/0,rom=<path>/<to>/<rom>).
It's necessary that the ROM is executed by the boot firmware.
It won't be executed by any OS.
Additionally, the boot firmware should be configured to execute the
ROM file.
For that reason, it's only possible to use a ROM when using
OVMF with enabled bus enumeration.
Differential Revision: https://reviews.freebsd.org/D33129
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 1 month
Parts of compiler-rt are also built for libgcc_eh and libgcc_s, and
these were already pointing to the libunwind unwind.h. For the sake of
consistency, also build compiler-rt itself against the libunwind
unwind.h, not the libcxxrt one.
MFC after: 3 days
geom_gettree() may be pretty expensive on large systems, and it is
not needed if only -b flag specified, that is processed by kernel.
MFC after: 1 month
Introduce pfctl_get_rules_info(), similar to pfctl_get_eth_rules_info()
to retrieve rules information (ticket and total number of rules).
Use the new function in pfctl.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34443
Make gctl_add_param() API public, allowing more precise control over
parameter flags. Previously it was impossible to properly declare
write-only ASCII parameters, used for result reporting, they were
declared as read-write binary instead, that was not nice.
MFC after: 1 month
__sfvwrite() advances the pointer before calling fflush. If fflush()
fails, it is not enough to roll back inside it, because we cannot know
how much was advanced by the caller.
Reported by: Peter <pmc@citylink.dinoex.sub.org>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Fixes: 86a16ada1ea608408cec370171d9f59353e97c77
Add _XOPEN_SOURCE_EXTENDED to use curses' get_wch() and to avoid a
building error after next "bsddialog 0.2" import.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D34419
time() is now implemented using clock_gettime(2) instead of
gettimeofday(2).
Reviewed by: debdrup
Fixes: 358ed16f7505 Use clock_gettime(CLOCK_SECOND)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34438
When filtering Ethernet packets allow rules to specify a mac address
with a mask. This indicates which bits of the specified address are
significant. This allows users to do things like filter based on device
manufacturer.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Allow packets to be tagged with dummynet information. Note that we do
not apply dummynet shaping on the L2 traffic, but instead mark it for
dummynet processing in the L3 code. This is the same approach as we take
for ALTQ.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32222
If we're not filtering on a specific MAC address don't print it at all,
rather than showing an all-zero address.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31749
Extent pfctl to be able to read configured Ethernet filtering rules from
the kernel and print them.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31738
The LibUSB v1.0 emulation layer uses pipes internally to signal between
threads. When USB devices are reset, as part of loading firmware, SIGPIPE
may happen, and that is expected and should be ignored.
PR: 261891
MFC after: 1 week
Sponsored by: NVIDIA Networking
Helper routine to call the kernel to get a path to the named device.
Different path enumeration methods (called locators) can be used
for different path types depending on what the kernel implements.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D32746
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
During distributeworld we call distribute on subdirectories, which in
turn calls installconfig. However, this recursive installconfig call
appends the distribution name (in these cases, "base") to DESTDIR. For
install(1) this works fine as its -D argument comes from the top-level
Makefile.inc1, which passes the original DESTDIR, thereby resulting in
the METALOG entry having the distribution name as a prefix representing
its true installed path relative to the root, but for the hand-rolled
entries they do not use install(1) and thus do not have access to what
the original DESTDIR was, resulting in the METALOG missing this prefix.
Thus, pass down the name of the distribution via a new variable DISTBASE
(chosen as Makefile.inc1 already uses that to convey this exact same
information to etc's distrib-dirs during distributeworld) and prepend
this to the handful of manually-generated METALOG entries. For the
installworld case this variable will be empty and so this behaves as
before.
Note that we need to be careful to avoid double slashes in the METALOG;
distributeworld uses find | awk to split the single METALOG up into
multiple dist.meta files, and this relies on the paths in the METALOG
having the exact prefix ./dist (or ./dist/usr/lib/debug).
Reviewed by: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D33997
Apply uncrustify changes to .c/.h files.
Reduce the diffs with EDK2 to aid with future merges. The
unconventional way we've imported this code makes using a vendor branch
to manage it at the very least tricky. Update FreeBSD-update to reflect
the slight shift in advise.
Reviewed by: imp
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Obtained from: 2f88bd3a12
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
Text format for AcpiEx device path in UEFI Spec:
AcpiEx(HID,CID,UID,HIDSTR,CIDSTR,UIDSTR)
AcpiEx(HID|HIDSTR,(CID|CIDSTR,UID|UIDSTR))(Display Only)
When convert device path to text for AcpiEx device path,
current code check AllowShortcuts parameter to convert
the device path to DisplayOnly text format(shorter text
representation) by mistake.
It should check DisplayOnly parameter.
This commit is to fix this issue.
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=1312
Obtained from: e9ab1635a2
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
AcpiExp text device path: AcpiExp(HID,CID,UIDSTR)
And according to UEFI spec, the CID parameter is optional
and has a default value of 0. But current implementation
miss to check following cases for the AcpiExp.
FromText: when text device is AcpiExp(HID,,UIDSTR)/AcpiExp(HID,0,UIDSTR)
ToText: when the CID is 0 in the node structure
This commit is to do the enhancement.
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
Obtained from: a8b5750901
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
According to UEFI spec,
for the Messaging Device Path with USB Class SubType, some paras
are optional in the text device path.
Take UsbClass(VID,PID,Class,SubClass,Protocol) for example,
The VID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The PID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The Class is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The SubClass is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The Protocol is an integer between 0 and 255 and is optional. The
default value is 0xFF.
So if any the optional para is not specified in the text device,
we should set related para in the node structure to default value.
This commit is to do the enhancement for USB Class device path
when optional para is not specified.
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
Obtained from: 3874108034
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
When converting DebugPort device path from text,
current code use VENDOR_DEFINED_MESSAGING_DEVICE_PATH structure
for Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
UINT8 VendorDefinedData[1];
} VENDOR_DEFINED_MESSAGING_DEVICE_PATH;
And Debugport Device Path is a vendor-defined messaging
device path with no data, only a GUID. So it's better to
use VENDOR_DEVICE_PATH to create the Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
} VENDOR_DEVICE_PATH;
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=1229
Obtained from: 9343d0a1cd
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
According to UEFI spec,for ACPI Expanded Device Path
when HID=PNP0A03 or CID=PNP0A03 and HID != PNP0A08,
the device path node can be displayed as: PciRoot(UID|UIDSTR)
When HID=PNP0A08 or CID=PNP0A08, the device path node can be
displayed as: PcieRoot(UID|UIDSTR). But current code miss the
code logic.
This commit is to do the enhancement.
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=1228
Obtained from: 78af0984b4
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
According to UEFI Spec, for ACPI Expanded Device Path,
when HIDSTR=empty, CIDSTR=empty, UID STR!=empty,
the ACPI Expanded Device Path node can be displayed as
AcpiExp(HID,CID,UIDSTR) format.
And if UID is 0 and UIDSTR is empty, then use AcpiEx format.
This patch is to correct the condition check to follow UEFI
Spec when convert the device path node to the AcpiExp text
format.
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=1226
Obtained from: fb4bea551e
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Adapted according to FreeBSD-update instructions, with the sole purpose
of reducing the differences with upstream sources.
Obtained from: 9095d37b8f
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
Per UEFI spec, iSCSI.Lun is a 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
Obtained from: d0196be1e3
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
For the following two functions:
DevPathFromTextBluetooth()
DevPathToTextBluetooth()
The Bluetooth device address "UINT8 Address[6]" is displayed with the
order from Address[5] to Address[0]. This commit reverses the order.
Obtained from: 4fc8277133
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
For current iSCSI protocol parsing, UINT16 truncation may be happened. Since
the Spec already have declaimed that 0 is TCP Protocol and 1+ is reserved, the
parsing can be refined as below:
if (StrCmp (ProtocolStr, L"TCP") == 0) {
ISCSIDevPath->NetworkProtocol = 0;
} else {
//
// Undefined and reserved.
//
ISCSIDevPath->NetworkProtocol = 1;
}
Obtained from: 7571a1c191
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
UefiDevicePathLibConvertTextToDevicePath correctly detects when it
has hit a ',' splicing together multiple paths. However, the code
that tries to cope with it:
{code}
if (IsInstanceEnd) {
DeviceNode = (EFI_DEVICE_PATH_PROTOCOL *) AllocatePool (
END_DEVICE_PATH_LENGTH);
ASSERT (DeviceNode != NULL);
SetDevicePathEndNode (DeviceNode);
NewDevicePath = AppendDevicePathNode (DevicePath, DeviceNode);
FreePool (DevicePath);
FreePool (DeviceNode);
DevicePath = NewDevicePath;
}
{code}
causes a problem. The END node that's appended it the node for the
entire list. So when the node is appended in AppendDevicePathNode,
it winds up disappearing. This leads to the path
'PciRoot(0x0),PciRoot(0x0)' parsing as if 'PciRoot(0x0)/PciRoot(0x0)'
were specified. These are two very different things.
NOTE:
This fix was already committed. It has been included with the sole
intention of reducing diffs with upstream.
Upstream Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=419
Obtained from: 647636e175
Pull Request: https://github.com/freebsd/freebsd-src/pull/581
