Removed code iterates over if_addrhead and tries to remove
routes for each ifa.
This is exactly the thing that if_purgeaddrs() do, and
if_purgeaddr() is already called in the end.
Reviewed by: glebius
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D28106
Currently we create link-local route by creating an always-on IPv6 prefix
in the prefix list. This prefix is not tied to the link-local ifa.
This leads to the following problems:
First, when flushing interface addresses we skip on-link route, leaving
fe80::/64 prefix on the interface without any IPv6 addresses.
Second, when creating and removing link-local alias we lose fe80::/64 prefix
from the routing table.
Fix this by attaching link-local prefix to the ifa at the initial creation.
Reviewed by: hrs
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D28129
This is required for Qt5, as found in Ubuntu Focal. The library contains
the minimum kernel version encoded in an ELF note; this makes rtld ignore
it altogether, with a confusing error message. Without it, things fail
like this:
$ konsole: error while loading shared libraries: libQt5Core.so.5: cannot
open shared object file: No such file or directory
For reference, the Qt kernel version requirements can be found at:
https://github.com/qt/qtbase/blob/dev/src/corelib/global/minimum-linux_p.h
Sponsored by: The FreeBSD Foundation
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D28105
This may allow an identical elfctl invocation to be used on multiple
FreeBSD versions, with features not implemented on older releases being
silently ignored.
PR: 252629 (related)
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28130
is enabled.
This builds wpa_supplicant / hostpad using internal encryption routines
rather than using libcrypt.
This has been supported in wpa for years now, however since we use
local makefiles for this, we bitrotted dependencies and configuration
options.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27958
This prevents a situation where other thread modifies map entries
permissions between setting max_prot, then relocking, then setting prot,
confusing the operation outcome. E.g. you can get an error that is not
possible if operation is performed atomic.
Also enable setting rwx for max_prot even if map does not allow to set
effective rwx protection.
Reviewed by: brooks, markj (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28117
Only x86 provides optimized implementations via the blake2 module. The
software "reference" implementation is already included in the crypto(4)
module, we can drop the extra MODULE_DEPEND for other platforms.
Without this change, if_wg.ko could not be loaded due to the missing
dependency.
PR: 252156
Reported by: gbe
Sponsored by: The FreeBSD Foundation
When the server side nfs-over-tls does an upcall to rpc.tlsservd(8)
for the handshake and the rpc.tlsservd "-u" command line option has
been specified, a list of gids may be returned.
The list will be returned in malloc'd memory pointed to by
res.gid.gid_val. To ensure the malloc occurs, res.gid.gid_val must
be NULL before the call. Then, the malloc'd memory needs to be free'd.
mem_free() just calls free(9), so a NULL pointer argument is fine
and a length argument == 0 is ok, since the "len" argument is not used.
This bug would have only affected nfs-over-tls and only when
rpc.tlsservd(8) is running with the "-u" command line option.
In libcasper, the first argument to the function is a structure that
represents a connection to Casper. On systems without Casper, macros
are used to interpose the Casper functions to standard libc ones.
This may cause errors/warnings that the variable is not used.
With the inline function, there is no such problem.
I omitted this file in: 8c121177f063a187534dcd475b136c34474802cd
When detaching the if_ure(4) driver, the TX active USB transfer array may
point to freed USB transfers. Given that the number of USB transfers is
very low, simply start all transfers every time there is a packet to
keep safe from use-after-free.
PR: 252608
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Ensure that we don't end up with a superpage in the vm_page_t's pv list.
This may help with debugging the panic reported in PR 250866, in which
l3 in pmap_remove_write() was found to be NULL. Adding a KASSERT to this
function will help narrow down the cause of this panic the next time it
occurs.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D28109
Some stack frames are too large for a store pair instruction we already
detect in the arm64 fbt code. Add support for handling subtracting the
stack pointer directly.
Sponsored by: Innovate UK
When searching for an instruction to patch out in the arm64 function
boundary trace we search for a store pair with a write back. This
instruction is commonly used to store two registers to the stack
and update the stack pointer to hold space for more.
This works in many cases, however not all functions use this, e.g.
when the stack frame is too large. In these cases we may find another
instruction of the same type that doesn't store through the stack
pointer. Filter these instructions out and assume if we see one we
are past the function prologue.
Reported by: rwatson
Sponsored by: Innovate UK
With newer AMD GPUs (>=Navi,Renoir) there is FPU context usage in the
amdgpu driver.
The `kernel_fpu_begin/end` implementations in drm did not even allow nested
begin-end blocks.
Submitted by: Greg V
Reviewed By: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D28061
A driver can register a shrinker that will be called when the kernel
wants to free some memory.
Add support for that in linuxkpi and call the registered shrinkers
when the lowmem event is triggered.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D27728
-pci_get_class : This function search for a matching pci device based on
the class/subclass and returns a newly created pci_dev.
- pci_{save,restore}_state : This is analogous to ours with the same name
- pci_is_root_bus : Return true if this is the root bus
- pci_get_domain_bus_and_slot : This function search for a matching pci
device based on domain, bus and slot/function concat into a single
unsigned int (devfn) and returns a newly created pci_dev
- pci_bus_{read,write}_config* : Read/Write to the config space.
While here add some helper function to alloc and fill the pci_dev struct.
Reviewed by: hselasky, bz (older version)
Differential Revision: https://reviews.freebsd.org/D27550
pci_find_class_from help finding one or multiple device matching
a class and subclass.
If the from argument is not null we will first loop in the device list
until we find the matching device and only then start to check if the
class/subclass matches.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D27549
Pass gfx_state to efi_find_framebuffer(), so we can pick between
GOP and UGA in efi_find_framebuffer(), also we can then
set up struct gen_fb in gfx_state from efifb and isolate efi fb data
processing into framebuffer.c.
This change does allow us to clean up efi_cons_init() and reduce
BS->LocateProtocol() calls.
A little downside is that we now need to translate gen_fb back to
efifb in bootinfo.c (for passing to kernel), and we need to add few
-I options to CFLAGS.
One possible way the recursion can happen is during fork: suppose
that fork is called from early code that did not triggered
jemalloc(3) initialization yet. Then we lock thr_malloc lock, and
call malloc_prefork() that might require initialization of jemalloc
pthread_mutexes, calling into libthr malloc. It is safe to allow
recursion for this occurence.
PR: 252579
Reported by: Vasily Postnicov <shamaz.mazum@gmail.com>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Even if sigfastblock block is non-zero, non-blockable signals must be
checked on ast and delivered now. This also affects debugger ability
to attach, because issignal() also calls ptracestop() if there is
a pending stop for debugee.
Instead of checking for sigfastblock, and either setting PENDING flag
for usermode or doing signal delivery loop, always do the loop after
checking, and then handle PENDING bit. issignal() already does the right
thing for fast-blocked case, allowing only STOPs and SIGKILL delivery to
happen.
Reported by: Vasily Postnicov <shamaz.mazum@gmail.com>, markj
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28089
User pending bit should not be set if kernel did not noted a pending signal.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28089
Right now the routine leaves the current CPU in the map, later tripping
on an assert when filling in the scoreboard: panic: IPI scoreboard is
zero, initiator 1 target 1
Instead pre-check if all CPUs are present in the map and remember that
outcome for later.
Fixes: 7eaea04a5bb1dc86 ("amd64: compare TLB shootdown target to all_cpus")
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D28111
Previously, we would accept any kind of LIO_* opcode, including ones
that were intended for in-kernel use only like LIO_SYNC (which is not
defined in userland). The situation became more serious with
022ca2fc7fe08d51f33a1d23a9be49e6d132914e. After that revision, setting
aio_lio_opcode to LIO_WRITEV or LIO_READV would trigger an assertion.
Note that POSIX does not specify what should happen if aio_lio_opcode is
invalid.
MFC-with: 022ca2fc7fe08d51f33a1d23a9be49e6d132914e
Reviewed by: jhb, tmunro, 0mp
Differential Revision: <https://reviews.freebsd.org/D28078
The in_cksum tests originally tried to simulate a BE environment by
swapping the byte order of the input. But that's overcomplicated, and
didn't actually work on real BE hardware. The correct testing strategy
is just to test on the native endianness, and run the tests in both BE
and LE environments.
Submitted by: Renato Riolino <renato.riolino@eldorado.org.br>
Reviewed By: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23193
On amd64, the pmap code passes all_cpus to
smp_targeted_tlb_shootdown() when unmapping from the
kernel pmap. This function has an optimized path to send IPIs
to all but itself, which it intends to do when the target
is all cpus. However, we need to compare the target cpu mask
with all_cpus, rather than using CPU_ISFULLSET(). Comparing with
CPU_ISFULLSET() will only work when we have MAXCPU cpus active in
the system, otherwise, we'll be sending repeated IPIs, rather than
a single IPI to all CPUs but ourself.
Fixing this should reduce the time spent in native_lapic_ipi_wait()
as we will be sending ipis in parallel, rather than one-by-one.
This is confirmed by dtrace.
Reviewed by: alc, jhb, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28102
UFS uses a new "mntfs" pseudo file system which provides private
device vnodes for a file system to safely access its disk device.
The original device vnode is saved in um_odevvp to hold the exclusive
lock on the device so that any attempts to open it for writing will
fail. But it is otherwise unused and has its BO_NOBUFS flag set to
enforce that file systems using mntfs vnodes do not accidentally
use the original devfs vnode. When the file system is unmounted,
um_odevvp is no longer needed and is released.
The lock order reversal happens because device vnodes must be locked
before UFS vnodes. During unmount, the root directory vnode lock
is held. When when calling vrele() on um_odevvp, vrele() attempts to
exclusive lock um_odevvp causing the lock order reversal. The problem
is eliminated by doing a non-blocking exclusive lock on um_odevvp
which will always succeed since there are no users of um_odevvp.
With um_odevvp locked, it can be released using vput which does not
attempt to do a blocking exclusive lock request and thus avoids the
lock order reversal.
Sponsored by: Netflix
For rate-based resources that support throttling (e.g.
readiops/writeips), this fixes a divide-by-zero panic when rctl(8)
passes 0 as the throttle value. For these resources, treat
zero-throttle requests as requests to suspend forward progress as long
as possible using the duration specified in
kern.racct.rctl.throttle_max.
PR: 251803
Reported by: chris@cretaforce.gr
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27858
Relevant inet/inet6 code has the control over deciding what
the RIB lookup function currently is. With that in mind,
explicitly set it to the current value (rn_match) in the
datapath lookups. This avoids cost on indirect call.
Differential Revision: https://reviews.freebsd.org/D28066
After old vmspace is destroyed during execve(2), but before the new space
is fully constructed, an error during image activation cannot be returned
because there is no executing program to receive it.
In the relatively common case of failure to map stack, print some hints
on the control terminal. Note that user has enough knobs to cause stack
mapping error, and this is the most common reason for execve(2) aborting
the process.
Requested by: jhb
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28050
It is checked in vm_map_insert() and vm_map_protect() that PROT_WRITE |
PROT_EXEC are never specified together, if vm_map has MAP_WX flag set.
FreeBSD control flag allows specific binary to request WX exempt, and
there are per ABI boolean sysctls kern.elf{32,64}.allow_wx to enable/
disable globally.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28050
When retrieving the list of group members we cannot simply use
ifa_lookup(), because it expects the interface to have an IP (v4 or v6)
address. This means that interfaces with no address are not found.
This presents as interfacing being alternately marked as skip and not
whenever the rules are re-loaded.
Happily we only need to fix ifa_grouplookup(). Teach it to also accept
AF_LINK (i.e. interface) node_hosts.
PR: 250994
MFC after: 3 days