Commit Graph

71 Commits

Author SHA1 Message Date
David E. O'Brien
ff1e937c46 Declare our DEC Alpha cdboot to be a fully released version 1.0. 2000-07-18 04:15:06 +00:00
John Baldwin
492f000557 Always install loader.4th, defaults/loader.conf, and support.4th instead of
only doing so if loader.rc does not exist.  This fixes the problem where
installworld doesn't update /boot/loader.4th, resulting in device.hints not
being loaded after updating past the config(8) changes, which resulted in
mcclock0 not being probed, and a nice kernel panic during boot.
2000-07-10 16:52:42 +00:00
Paul Saab
cc3d937224 Delay calling the device cleanup routines until the absolute last
moment.  We were cleaning up after PXE too early and the module
dependancy code would not be able to load any files if it needed
too.
2000-06-14 10:34:29 +00:00
Daniel C. Sobral
a6a1d6e852 Bump loader version due to FICL (duh!) and copyin, copyout, setenv&cia. 2000-06-07 22:14:09 +00:00
Doug Rabson
e347aadd85 Record the new PALcode revision in the pcs structure after changing to
run OSF/1 PALcode.

Obtained from: NetBSD
2000-06-03 08:24:37 +00:00
Daniel C. Sobral
27391e65fd Remove INSTALL_FORTH stuff. 2000-05-19 08:40:37 +00:00
Daniel C. Sobral
6593d234e6 Move man page directives to common/Makefile.inc.
Remove INSTALL_FORTH stuff.
2000-05-19 08:40:11 +00:00
Peter Wemm
24d29b9649 Install the bootforth config files for the Alpha too. loader.conf should
be functional now.
2000-05-12 23:22:09 +00:00
Peter Wemm
dafe1ac0a0 Reactivate the FICL hooks to make it be compiled in, but also initialize
FICL.  bootforth is now live on the Alpha!

**BEWARE** - you *MUST* build and install a current libstand or you will
most likely get zfree() panics at loader startup.

We should now be able to set up the loader.conf stuff on the Alpha too.
2000-05-12 22:45:16 +00:00
Peter Wemm
fa139a1ac3 Fix the Alpha loader the rest of the way. If FICL is present in
/boot/loader (even though it is 100% dormant in the Alpha version),
then the loader panics with a zfree error:Loading /boot/loader.test
  *** keyboard not plugged in...
  Console: SRM firmware console
  panic: zfree(0x2003cb58,4096): wild pointer
versus the exact same code but without FICL linked in:
  Loading /boot/loader
  Console: SRM firmware console
  VMS PAL rev: 0x1000600010114
  OSF PAL rev: 0x1000600020116
  Switch to OSF PAL code succeeded.

  FreeBSD/alpha SRM disk boot, Revision 0.1

This is almost certainly an alpha infrastructure bug, not a FICL
problem.  It's probably the same thing that made FICL fail for no
apparent reason on the Alpha.
2000-05-12 07:47:47 +00:00
Mike Smith
1fd777e1d5 Teach the alpha loader install process to make backup copies of the
boot programs when installing new versions.
2000-05-06 18:31:26 +00:00
Peter Wemm
365c5db0a7 Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
Boris Popov
801e789e01 Update loader logic to distinguish modules vs. files.
Add support for module metadata. The old way of dependancy
handling will be supported for a while.

Reviewed by:	peter
2000-05-01 17:41:25 +00:00
Jonathan Lemon
8e30378f89 Teach the loader about the ext2fs filesystem, extended partitions, and
the new readdir function.
2000-04-29 20:49:33 +00:00
Daniel C. Sobral
fbc9fa5059 Pass unit number to bcache_strategy(), so that the cache can be
flushed if the unit changes. Compute the absolute offset before
bcache_strategy() instead of after.

The actual fix is sligthly different for the one in the PR.

PR:		17098
Submitted by:	John Hood <jhood@sitaranetworks.com>
2000-03-15 01:53:34 +00:00
Peter Wemm
7f69314760 Connect up the bootforth glue and compile it, but don't initialize it
at runtime as it has a nasty habit of crashing on the Alpha :-(.
This is being done this way so we have a common starting point for
debugging.
1999-12-27 09:20:33 +00:00
Marcel Moolenaar
a031bda24e Don't build gensetdefs when we can use /usr/bin/gensetdefs. The latter
also creates setdef{0|1}.c so there's no need to have those in the
repository. Using /usr/bin/gensetdefs has no consequences for the
output.
1999-12-16 17:25:01 +00:00
Marcel Moolenaar
bc16e96f49 Add -L${DESTDIR}${LIBDIR} to ld's command line so that the right
libstand is used.
1999-12-15 18:16:56 +00:00
Poul-Henning Kamp
7d5961670c Remove BAD144 support, it has already been disabled for some time. 1999-12-08 09:33:00 +00:00
Doug Rabson
ef4939417a Add back netboot since it compiles just fine. Note that you need a full
source tree to build netboot since it depends on headers from libstand.
1999-11-03 20:19:30 +00:00
Doug Rabson
0296dea15c * Don't wait forever for the boot2 filename if the PCC wraps.
* If the user presses return, load boot2 immediately.
1999-11-03 20:18:12 +00:00
Doug Rabson
5ed53bbd66 Allow this driver to open disks with no labels (CDROMS don't). 1999-10-12 20:04:46 +00:00
Doug Rabson
dd5168ad85 Fix build break.
Submitted by: Thomas Valentino Crimi <tcrimi+@andrew.cmu.edu>
1999-10-09 12:30:18 +00:00
Doug Rabson
622b8a671c Add net device to netboot. 1999-10-09 12:29:42 +00:00
Matt Jacob
4fe421d5f9 netboot removed until somebody fixes it so it compiles 1999-09-09 01:28:26 +00:00
Mike Smith
b0289f2c7a Add more missing files from the reorganisation.
Submitted by:	dfr
1999-09-07 09:08:09 +00:00
Doug Rabson
cb39a2a520 Change NetBSD/Alpha to FreeBSD/alpha. 1999-09-06 18:32:40 +00:00
Mike Smith
8e76f3f49a Common Alpha loader Makefile, omitted accidentally from the previous set
of commits.
1999-09-06 08:38:10 +00:00
Peter Wemm
3ca1647688 $Id$ -> $FreeBSD$ 1999-09-05 15:21:05 +00:00
Mike Smith
c7ba4828b1 Slight reorganisation of the Alpha/SRM loader build:
- Make as much of the makefile for each of the three flavours
   (disk, CDROM, net) common.
 - Special-case the libalpha startup module on its use in boot1, not
   the other way around.
 - Build the loader out of a "loader" directory

Reviewed by:	mjacob, dfr
1999-09-03 19:42:18 +00:00
Doug Rabson
be73175638 Change $Id$ to $FreeBSD$ 1999-09-01 09:38:21 +00:00
Doug Rabson
74b128bad6 * Fix a stack of warnings.
* Make it possible to type a filename to boot1 so that it is possible to
  recover from fatally broken versions of /boot/loader.
* Make a start at a CD boot program (not yet functional).
1999-09-01 09:11:14 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
John Polstra
32ea96b6ae Append the flags from the "boot" command to those which came from
the SRM environment.  This makes the traditional "boot [/kernel] -s"
and similar things work on the Alpha.  Since the flags are appended,
they augment and/or override those from the SRM environment.
1999-08-14 17:06:11 +00:00
Mike Smith
73332890ea Walk around the end of all the silly guessing of device types and unit
numbers that we have been doing in the past, and read /etc/fstab off the
proposed root filesystem to determine the actual device name and vfs
type for the root filesystem.  These are then exported to the kernel
via the environment variable vfs.root.mountfrom.
1999-07-21 00:08:54 +00:00
Peter Wemm
a6cbd18d26 Fix typo (wrong path) 1999-06-29 21:40:05 +00:00
Peter Wemm
5110b634b0 Reconcile all the loader newvers.sh's into one common one. 1999-06-29 21:23:26 +00:00
Peter Wemm
a36ed03d44 Don't use head/tail - they don't exist in a 'make world' environment.
(Why do we have three copies of this script anyway?)
1999-06-29 21:06:16 +00:00
Daniel C. Sobral
fdbad643d5 Minor nit. It is probably still incorrect, but at least don't
claim to use i386-specific files on alpha...
1999-04-24 18:05:45 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Daniel C. Sobral
22004b5952 Revert bootinfo to 1.4 and use a different solution to NULL m_args
instead (don't copy).
1999-03-20 14:13:09 +00:00
Doug Rabson
28add8fe61 Don't choke in MOD_ARGS() if mp->m_args is NULL. 1999-03-18 11:00:48 +00:00
Daniel C. Sobral
445a035707 Add MODINFO_ARGS, parameters passed to a module at load time.
VS: ----------------------------------------------------------------------
1999-03-08 11:05:52 +00:00
Mike Smith
378972ac6b Transition from using Perl to using awk for our text-manipulation
needs.  This removes the dependancy on Perl for the generation of the
loader, allowing the world to be built on a perl-free system.

Submitted by:	Joe Abley <jabley@clear.co.nz>
1999-01-18 19:05:27 +00:00
Mike Smith
0f2ca06478 Alpha-specific help topics (currently empty) 1999-01-05 20:44:26 +00:00
Mike Smith
a2d84c6405 Add dependancy to build loader.help here 1999-01-04 01:28:39 +00:00
Mike Smith
9aad9a4900 First cut at generating loader.help for the alpha 1999-01-03 20:54:05 +00:00
Jordan K. Hubbard
8963f9f139 Update for new boot block location. 1999-01-02 23:22:12 +00:00
Mike Smith
330ef7ac09 unlocalise build date (merge from i386) 1998-12-15 04:27:15 +00:00
Mike Smith
631746a171 Include "bootstrap.h" to get a definition for bcache_devdata.
Submitted by:	jkh
1998-11-03 23:44:49 +00:00