inpcb. t4_tom detaches the inpcb from the toepcb as soon as the
hardware is done with the connection (in final_cpl_received) but the
socket is around as long as the cm_id and the rest of iWARP state is.
This fixes an intermittent NULL dereference during abort.
Submitted by: KrishnamRaju ErapaRaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
This patch fixes typo which results in extra bits of PMU control register.
PR: 217782
Submitted by: Svyatoslav <razmyslov at viva64.com>
Found by: PVS-Studio
Instead of single isp_intr() function doing all possible magic, introduce
four different functions to handle mailbox operation completions, async
events, response and ATIO queues. The goal is to isolate different code
paths to make code more readable, and to make easier support for multiple
interrupt vectors. Even oldest hardware in many cases can identify what
code path it should run on interrupt. Contemporary hardware can assign
them to different interrupt vectors.
MFC after: 2 weeks
inet_ntoa() and inet_ntoa_r() take the address in network
byte-order. When I removed those calls, I should have
replaced them with ntohl() to make the hex addresses slightly
less unreadable. Here they are.
See r315277 regarding classic blunders.
vangyzen: you're deep in "no good deed" territory, it seems
--badger
Reported by: ian
MFC after: 3 days
MFC when: I finally get it right
Sponsored by: Dell EMC
When I made the changes in r313821, I fell victim to one of the
classic blunders, the most famous of which is: never get involved
in a land war in Asia. But only slightly less well known is this:
Keep your brain turned on and engaged when making a tedious, sweeping,
mechanical change. KTR can correctly log the immediate integral values
passed to it, as well as constant strings, but not non-constant strings,
since they might change by the time ktrdump retrieves them.
Reported by: glebius
MFC after: 3 days
Sponsored by: Dell EMC
It was implemented to reduce context switches when uploading firmware to
card's RAM. But this mechanism is not used last 10 years since all mbox
operations are now polled, and it was never used for cards produced in
last 15 years. Newer cards can use DMA to upload firmware.
MFC after: 2 weeks
This change fixes DMA resource leak on driver unload. Also it removes
DMA resources allocation for hardcoded number of requests before fetching
the real number from firmware. Also it prepares ground for more flexible
IRQs allocation according to firmware capabilities.
MFC after: 2 weeks
- unconditionally enable BUS_DMA on non-x86 architectures
- speed up rxd zeroing via customized function
- support out of order updates to rxd's
- add prefetching to hardware descriptor rings
- only prefetch on 10G or faster hardware
- add seperate tx queue intr function
- preliminary rework of NETMAP interfaces, WIP
Submitted by: Matt Macy <mmacy@nextbsd.org>
Sponsored by: Limelight Networks
Make sure that uinput state field reflects actual state by checking
evdev_register result for errors
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
Differential Revision: https://reviews.freebsd.org/D9320
hardware but lack the larger fifos rev 5 hardware should have.
The linux world (where our FDT data comes from) solved this by adding
a new property to pl011 nodes, "arm,primecell-periphid". When this
property is present, its values override the values in the hardware
periphid registers. For pl011 rev 5 hardware with small fifos, they
override the id so that it appears to be rev 4 hardware.
The driver now uses the new property when present. It also continues
to check the device compat string, to handle older fdt data that may
still be in use on existing systems (on RPi systems it is common to
update system software without updating fdt data which is part of the
boot firmware).
Reviewed by: imp
- XPT_NOTIFY_ACKNOWLEDGE was not handled, causing stuck requests.
- XPT_ABORT was not even trying to abort active ATIOs/INOTs.
- Initiator's tag was not stored and not used where needed.
- List of TM request types needed update.
- mpt_scsi_tgt_status() missed some useful debugging.
After this change global TM requests, such as reset, should work properly.
ABORT TASK (ABTS) requests are still not passes to CTL, that is not good
and should be fixed.
MFC after: 2 weeks
user default normal attribute to the current attribute).
This change only fixes a logic error. scterm_clear() used to be
used for terminal reset, but teken uses a general fill function for
that, leaving scterm_clear() only used for initialization and mode
change, when using the user default attribute is correct. It is not
really a terminal function, but needs to sync its changes with the
terminal layer. Syncing of the attribute is currently broken for
terminal reset, but works for initialization and mode change.
some cases of initialization and resetting of the teken cursor position.
(This bad name is consistent with others, but it is too easy to confuse
with scteken_cursor() which goes in the opposite direction.)
The following cases were broken:
- for booting without a syscons console, the teken and sc positions for
ttyv0 were (0, 0), but are supposed to be somewhere in the middle of
the screen (after carefully preserved BIOS and loader messages) (at
least if there is no mode switch that loses the messages).
- after mode switches, the screen is cleared and the cursor is supposed to
be moved to (0, 0), but it was only moved there for sc.
The following case was hacked to work:
- for booting with a syscons console, it was arranged that scteken_init()
for the console could see a nonzero cursor position and adjust, although
this broke the sc seeing it in the non-console case above.
They cannot be used anymore with the userland bits we provide.
Furthermore, their KMS versions support the same hardware.
Submitted by: dumbbell
Reviewed by: emaste, manu
Sponsored by: AsiaBSDCon
Differential Revision: https://reviews.freebsd.org/D5614
looked like it might handle reverse attributes, but it actually handles
conversion of attributes in the direction indicated by the new name.
Reverse attributes are just broken.
Rename scteken_attr() to scteken_te_to_sc_attr(). scteken_attr() looked
like it might give teken attributes, but it actually gives sc attributes.
Change scteken_te_to_sc_attr() to return int instead of unsigned int.
u_char would be enough, and it promotes to int, and syscons uses int
or u_short for its attributes everywhere else (u_short holds a shifted
form and it promotes to int too).
This change just does cleanups missed in r56043 17 years ago. The
default attributes were still stored in structs for the purpose of
changing them and passing around pointers to the defaults, but r56043
added another layer that made the defaults invariant and only used for
initialization and reset. Just use the defaults directly. This was
already done for the kernel defaults. The defaults for reverse
attributes aren't actually used, but are ignored in layers that no
longer support them.
- Not set BufferLength caused receive of empty ATIOs.
- CDB length guessing was broken at least for RC16.
- mpt_req_untimeout() was called with wrong req parameter.
- Sense data reporting was broken in several ways.
With this change my LSI7204EP-LC can pass at least basic tests as target.
The code is still far from perfect, but finally I found second hw/driver
after isp(4) that really can work in CAM target mode.
MFC after: 2 weeks
is unavailable on sparc64 only. This makes the new ec_putc() a non-op
on sparc64 but still calls it. On other non-x86 arches, it should
compile but might not work.
Reported by: gjb
